Differences

This shows you the differences between two versions of the page.

--- envelope-follower-bissel-based [2021/01/05 22:04] – [BOM Mouser] phatline
+++ envelope-follower-bissel-based [2021/01/05 23:01] – [Resources] phatline
@@ Line 52: / Line 52: @@
 [[https://www.mouser.com/tools/part-list-import.aspx|copy list below, and paste in this link, you will need to order the project 2 times since 2PCBs are on 1PCB]]\\
 -FM4002|2\\
--SJ1-3535NG|3\\
+-SJ1-3535NG-GR|3\\
 -G821EU210AAL10Y|1\\
 -MINISMDC014F-2|2\\
@@ Line 60: / Line 60: @@
 -PTV09A3020FB104|1\\
 \\
-when making 10PCBs this make a total of **53,58€** incl Shipping which is free above 50€!\\
+for prototyping i ordered:\\
+**490-SJ1-3535NG-GR**  instead of **490-SJ1-3535NG** because it is out of stock - so **GREEN sockets** for now!\\
+\\
+when making 10PCBs this make a total of ** 69,83€** incl Shipping/VAT which is free above 50€!\\
 There are 2 SOICs that have to get Handsoldered, i have done this before and its easy!\\
 {{:phatline:env-follower-handsolder.png?500|}}\\
@@ Line 67: / Line 70: @@
 ===== Overall Material Costs =====
-PCB:**42,44€ +** MouserParts:**53,58** = 96,02€ **/ 10** PCBs **= 9,602€**\\
+PCB:**42,44€ +** MouserParts:** 69,83** = 111,46€ **/ 10** PCBs **= 11,14€ a PCB**\\
 (where half off work is done by pick and place machine!)\\
@@ Line 82: / Line 85: @@
 ===== To Do =====
-experiment with the Smooting CAP, i already implimented a Jumper which add a second  Capacitor to "double" the capacity... i took 220+220nF, but maybe it is better to use 100+220nF?\\
+frontplate\\
-experiment with the Frequency Pot which is a lin10K + 2K Serial Resistor which gives a range of 2K-12K - really dont know what value spectrum we need here!\\
+Debugging First Version\\
-adding some Jumpers to break the circuit for debugging or measurement\\
+**experiment with the Smooting CAP:** a Header is connected paralell to a integrated 100nF Cap, connect there a CAP to encrease the smoothing\\
-frontplate, Debugging First Version\\
+**experiment with the Frequency Pot:** a lin10K + 1K internal Serial Resistor which gives a range of 1K-12K - i also made a Header here, which you can bridge then you have 1-12K, or you put a resistor there for example a 5K, then you will get a range from 6-16K... \\
+I addet some Jumpers to break the circuit for debugging or measurement\\
+\\
+Modding **Headers/Jumpers:**\\
+{{:phatline:ENV-Follower-3D-top.png?800|}}\\
 ===== Resources =====
 [[https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=109067#p1511975|muffwiggler-topic]]\\
@@ Line 94: / Line 100: @@
 [[https://www.muffwiggler.com/forum/userpix2/10917_bom_1.jpg|THT-PCB-BOM]]\\
 [[https://www.muffwiggler.com/forum/userpix2/32564_scr01_2.png|Haralds-Hi-Clock-Measurements]]\\
+I give this links because it is the source: but i cant recommend that forum! (deletes of posts, shitstorm, non constructive posts...)
 ====== Community users working on it ======
   * **[[Phatline]]** =  Programming, Documentation...\\