MIDIbox

User Tools

Site Tools

Trace:
fadercore_-_vlr-8enc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
fadercore_-_vlr-8enc [2014/07/26 15:21]
novski 		fadercore_-_vlr-8enc [2014/07/27 21:22]
novski
Line 1: Line 1:
-====== Fadercore ======+====== ​[[fadercore_-_fadermodule_for_audio_daw|Fadercore]] ======
  
 Standard 220mm wide modules ​ Standard 220mm wide modules ​
Line 31: Line 31:
 == The other Materials: Mouser == == The other Materials: Mouser ==
  
-  * 2x10pin Header, 517-30310-6002 +  * 2x10pin Header, 517-30310-6002 ​            
-  * 1xResistor Array 220Ohm SMD,  +  * 2xULN2803, 595-ULN2803ADWR ​                                                                                                      ​ 
-  * 1x74HC595 SMD,  +  * 9x100nF,​594-K104K15X7RF53K2  
- +  * 6x10k, 774-77061103P ​        
-                +  * 4x220, 652-4816P-T1LF-220 ​                        ​ 
-  * 2xULN2803, 595-ULN2803ADWR ​                                                                                                                  ​ +  * 3x220, 660-MF1/​2LCT52R221J ​                                                                  ​ 
-  * 9x100nF,​594-K104K15X7RF53K2 ​                      +  * 3x74HC165D, 771-HC165D652 
-  * 6x10k, 774-77061103P ​                                                            +  * 3x74HC595D, 771-74HC595D ​                                                
-  * 4x220, 652-4816P-T1LF-220 ​                                                                    +
-  * 3x220, 660-MF1/​2LCT52R221J ​                                                                                                  ​ +
-  * 3x74HC165N ​                                                                                       +
-  * 3x74HC595 ​                                                                                                     +
-  * 8xBOURNS_PEL12T ​                                                   ​+
   * 3xTPIC6B595,​ because the MOQ is 250 i deliver them for you with the PCB.   * 3xTPIC6B595,​ because the MOQ is 250 i deliver them for you with the PCB.
-  * 88xLED+  * 88xLED ​RED, 604-WP3A8HD
   * 88xLED holder 6mm Height, 749-ELM-5-6MM   * 88xLED holder 6mm Height, 749-ELM-5-6MM
  
-Project Order Basket on Mouser: [[]]+Project Order Basket on Mouser: [[http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=a6dbae9ab7]] 
 + 
 +The PCB is available under: [[http://​vlrlab.com/​lang/​17-8enc.html]] 
 + 
 +  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** 
 +The Encoder on VLRlabs.com [[https://​www.vlrlab.com/​encoder/​13-bourns-rgb-led-encoder.html]]
  
-The PCB is available under: [[https://​vlrlab.com/​pcb/​10-8-odisplay.html]] 
  
 ==== How to get Started ==== ==== How to get Started ====
  
 +If its your first SMD soldering you can follow this on t1:58 : http://​www.youtube.com/​watch?​v=5uiroWBkdFY
 +I recommend to not buy solder paste, instead buy some flux-paste like this on Mouser: 590-8341-10ML
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
 +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,​12,​13. 
 +Then go on with the Topside and the LEDs before soldering the Encoder as last. 
 +Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
 +Connect the core on J8/9 to J1 of the VLR-8Enc board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
 +
 +To make it work with MIOS .NGC  File we need to know how the shift-registers are connected.
 +
 +**Inputs:​**\\
 +1# Encoder ​        1-4\\
 +2# Encoder ​        5-8\\
 +3# Encoder Button ​ 1-8\\
 +
 +**Outputs:​**\\
 +1# RED Shaft LED   1-8\\
 +2# GREEN shaft LED 1-8\\
 +3# BLUE shaft LED  1-8\\
 +4# LED Ring Row    1-8\\
 +5# LED Ring Selct  1-8\\
 +6# LED Ring Select 9-11\\
 +
 +Assuming that the VLR-8Enc is the first device on the chain of J8/9 we need to configure it like this:
 +\\
 +RESET_HW\\
 +\\
 +LCD "​%C"​\\
 +\\
 +# Encoder configuration\\
 +\\
 +ENC n=  1   sr=1 pins=0:​1 ​  ​type=detented2\\
 +ENC n=  2   sr=1 pins=2:​3 ​  ​type=detented2\\
 +ENC n=  3   sr=1 pins=4:​5 ​  ​type=detented2\\
 +ENC n=  4   sr=1 pins=6:​7 ​  ​type=detented2\\
 +ENC n=  5   sr=2 pins=0:​1 ​  ​type=detented2\\
 +ENC n=  6   sr=2 pins=2:​3 ​  ​type=detented2\\
 +ENC n=  7   sr=2 pins=4:​5 ​  ​type=detented2\\
 +ENC n=  8   sr=2 pins=6:​7 ​  ​type=detented2\\
 +\\
 +# LEDring configuration\\
 +DOUT_MATRIX n= 1  rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\
 +\\
 +# Encoder events\\
 +EVENT_ENC id= 1  fwd_id=LED_MATRIX:​1 ​  ​type=CC chn= 1 cc= 24  lcd_pos=1:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 2  fwd_id=LED_MATRIX:​2 ​  ​type=CC chn= 1 cc= 25  lcd_pos=2:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 3  fwd_id=LED_MATRIX:​3 ​  ​type=CC chn= 1 cc= 26  lcd_pos=3:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 4  fwd_id=LED_MATRIX:​4 ​  ​type=CC chn= 1 cc= 27  lcd_pos=4:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 5  fwd_id=LED_MATRIX:​5 ​  ​type=CC chn= 1 cc= 28  lcd_pos=5:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 6  fwd_id=LED_MATRIX:​6 ​  ​type=CC chn= 1 cc= 29  lcd_pos=6:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 7  fwd_id=LED_MATRIX:​7 ​  ​type=CC chn= 1 cc= 30  lcd_pos=7:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 8  fwd_id=LED_MATRIX:​8 ​  ​type=CC chn= 1 cc= 31  lcd_pos=8:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +\\
 +# Encoder Buttons\\
 +\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​8 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​16 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​24 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​7 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​15 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​23 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​6 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​14 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​22 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​5 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​13 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​21 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​4 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​12 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​20 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​3 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​11 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​19 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​2 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​10 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​18 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​1 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​9 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​17 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​5 label="​B^std_btn"​\\
 +\\
 +LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\
 +LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=10 ​ pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=11 ​ pattern=0000011100000000\\
 +LED_MATRIX_PATTERN n=2  pos=12 ​ pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=13 ​ pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=14 ​ pattern=0000011111000000\\
 +
 +Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:​1:​5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
fadercore_-_vlr-8enc.txt · Last modified: 2014/07/27 21:23 by novski

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki