Differences

This shows you the differences between two versions of the page.

--- findbuddha [2011/08/07 06:18] – findbuddha
+++ findbuddha [2011/12/15 14:40] – Added library file findbuddha
@@ Line 1: / Line 1: @@
-{{:findbuddha:findbuddha-current-pic.jpg|}}
+All files on this page are for DIY/noncommercial use only. PM me on the forum for help/advice/whatever regarding my design.
+Big thanks to TK, nILS, Wilba and anyone else who helped!
-All files on this page are for DIY/noncommercial use only. PM me on the forum to discuss other uses, and for general help/advice/whatever regarding my design.
 DESIGN SOFTWARE USED:
@@ Line 10: / Line 11: @@
 A Sketchup plugin to export to .svg: http://code.google.com/p/sketchup-svg-outline-plugin/\\
 Inkscape for .svg editing: www.inkscape.org/\\
 MANUFACTURING:
@@ Line 15: / Line 17: @@
 Chassis and front panel are from www.ponoko.com (New Zealand hub). Materials include acrylic: 3mm Black (frosted 1 side), 3mm Clear, 4.5mm Arctic Ice; and 7mm veneered MDF.\\
 PCBs were manufactured at Gold Phoenix. Dimensions and layout were chosen/compromised to fit max. sizes available at both Ponoko and Gold Phoenix.
 WARNING!!!!
@@ Line 21: / Line 24: @@
 I have endeavoured to only share files that I have used to get PCBs, panels etc. produced. If this is not the case it will be noted. I do not plan to produce corrected design files unless I need them for myself.\\
 Use of these designs is at your own risk. A list of currently known issues follows:\\
 KNOWN ISSUES / BUILD SUGGESTIONS:
@@ Line 27: / Line 31: @@
 - blm-full.* are currently untested, except as used in the 5x17.brd. The above schematic error is corrected.\\
 - blm-scalar.* contain an error. Pins I4-I7 are mirrored. This is easily fixed with a connector modification, and the blm-scalar module seems to work as intended.\\
-- seq-cs.* if more than 1 LED is lit per cathode the switches on that cathode don't work. Any assistance on this matter would be much appreciated! :)\\
 - P3-frontpanel.svg has blue (cut) lines around engraving marks for some of the fader scale lines. I have worked around this by filling the holes with paint.\\
-- Good idea to request ponoko to do the engraving on the matte side. My prototyping runs came with the engraving on the glossy side.
+- Good idea to request ponoko to do the engraving on the matte side. My prototyping runs came with the engraving on the glossy side.\\
-- Some sanding is required to get LCD windows and button caps to fit correctly.
+- Some sanding is required to get LCD windows and button caps to fit correctly.\\
-- Check LED orientation prior to soldering - it may not match the outline printed on the board.
+- Check LED orientation prior to soldering - it may not match the outline printed on the board.\\
-Design files are currently in here:
-{{:findbuddha:findbuddha-shared-wiki-docs-0.1.zip|}}
+DESIGN FILES:
+--------------------
+{{:findbuddha:findbuddha-shared-wiki-docs-0.1.zip|}}\\
+{{:findbuddha:blm-scalar-corrected.zip|}}\\
+{{:findbuddha:fb-kicad-library-21-09-2011.zip|}}