mididoc:midibox_kb
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
mididoc:midibox_kb [2016/03/24 10:04] – fantomxr | mididoc:midibox_kb [2016/03/24 10:14] – fantomxr | ||
---|---|---|---|
Line 11: | Line 11: | ||
As I work a lot with keybeds from Fatar and I was looking for an electronic that work with it I found MIDIbox to be the best solution for me. I had a bunch of different keybeds in my hands and I noticed, that some keys are more sensitive than others. So I asked TK to implement a calibration-mode to overcome this issue. With the calibration-mode it is possible to adjust the slowest-delay of every single note on the keyboard. Here is how it works: | As I work a lot with keybeds from Fatar and I was looking for an electronic that work with it I found MIDIbox to be the best solution for me. I had a bunch of different keybeds in my hands and I noticed, that some keys are more sensitive than others. So I asked TK to implement a calibration-mode to overcome this issue. With the calibration-mode it is possible to adjust the slowest-delay of every single note on the keyboard. Here is how it works: | ||
- | Enter //set kb 1 calibration on// in the MIOS Terminal. Now you either have to press every key with the exact same velocity which is nearly impossible or (and that’s the way I do it) use a long piece of wood and press down all white keys and after that all black keys at the same time. | + | Enter //set kb <1|2> |
- | When you are finished enter //set kb 1 calibration off// and play the keybed with your favorite sound. If it works like you expected, enter //save *// where * is the name of the .NGC-file if you work on MB_NG or enter //store// if you work with MB_KB. You will notice that there will be a new file on the sd-card called .NGK. This file contains the slowest-delays | + | When you are finished enter //set kb <1|2> |
- | With the calibration-mode another change was made. You still have the “slowest_delay”-parameter in MBKB and MBNG. This value now changes | + | For MB_NG: If it works like you expected enter //save < |
+ | For MB_KB: If it works like you expected enter //store//. | ||
+ | For MB_NG: | ||
+ | For MB_KB: If you would like to change the slowest-delay of a single key simply enter //set kb <1|2> key_calibration_value <key> < | ||
+ | |||
+ | With the calibration-mode another change was made. You still have the “slowest_delay”-parameter in MBKB and MBNG. This value now changes the sensitivity per mille. A value of 1000 uses the delays in the .NGK-file = no change. A value of 2000 would double the measured delays - a value of 500 halves the measured delays. |
mididoc/midibox_kb.txt · Last modified: 2016/03/24 10:17 by fantomxr