parts_faq
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
| parts_faq [2016/06/15 12:41] – [What wattage resistors should I buy?] psykhaze | parts_faq [2016/06/15 12:43] – [I can't find a bridge rectifier to fit the PCB's.] psykhaze | ||
|---|---|---|---|
| Line 10: | Line 10: | ||
| The whole MBHP works on 5V, so all Caps should be at about **16V or higher**. It doesn´t matter if you go higher. | The whole MBHP works on 5V, so all Caps should be at about **16V or higher**. It doesn´t matter if you go higher. | ||
| + | \\ | ||
| + | \\ | ||
| ===== What is the correct polarity of the (resistor / capacitor / diode / etc) ===== | ===== What is the correct polarity of the (resistor / capacitor / diode / etc) ===== | ||
| Line 20: | Line 21: | ||
| Most other components have some sort of mark as to their correct orientation. | Most other components have some sort of mark as to their correct orientation. | ||
| + | \\ | ||
| + | \\ | ||
| ===== What kind of switches do I need? ===== | ===== What kind of switches do I need? ===== | ||
| Line 58: | Line 60: | ||
| As you can see, there is no real standard for naming them, but the right switch by any other name will drive your DIN module ;)\\ | As you can see, there is no real standard for naming them, but the right switch by any other name will drive your DIN module ;)\\ | ||
| When in doubt, don't hesitate to contact the distributor for clarification. This may save you some headache and some money as some do not accept returns! | When in doubt, don't hesitate to contact the distributor for clarification. This may save you some headache and some money as some do not accept returns! | ||
| + | \\ | ||
| \\ | \\ | ||
| ===== What size/type of faders should I buy? ===== | ===== What size/type of faders should I buy? ===== | ||
| Line 64: | Line 67: | ||
| Trying to save money on wobbly cheap plastic faders, uh? You might hate yourself for that decision after six months of using your favorite new midi-toy. Consider that. | Trying to save money on wobbly cheap plastic faders, uh? You might hate yourself for that decision after six months of using your favorite new midi-toy. Consider that. | ||
| + | \\ | ||
| + | \\ | ||
| ===== What type of crystal do I need? ===== | ===== What type of crystal do I need? ===== | ||
| Line 70: | Line 74: | ||
| [[Crystals and Oscillators]] | [[Crystals and Oscillators]] | ||
| + | \\ | ||
| + | \\ | ||
| ===== I can't find a bridge rectifier to fit the PCB's. ===== | ===== I can't find a bridge rectifier to fit the PCB's. ===== | ||
| You can substitute four 1N4001 (or any of the 1N400X series) for the bridge rectifier, they will handle more than enough current. | You can substitute four 1N4001 (or any of the 1N400X series) for the bridge rectifier, they will handle more than enough current. | ||
| + | \\ | ||
| + | \\ | ||
| ===== What Power supply should I use, and how much power should it have? ===== | ===== What Power supply should I use, and how much power should it have? ===== | ||
parts_faq.txt · Last modified: 2016/06/15 12:47 by psykhaze