parts_faq
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
parts_faq [2016/06/15 12:42] – [What is the correct polarity of the (resistor / capacitor / diode / etc)] psykhaze | parts_faq [2016/06/15 12:43] – [I can't find a bridge rectifier to fit the PCB's.] psykhaze | ||
---|---|---|---|
Line 21: | Line 21: | ||
Most other components have some sort of mark as to their correct orientation. | Most other components have some sort of mark as to their correct orientation. | ||
- | |||
\\ | \\ | ||
\\ | \\ | ||
Line 61: | Line 60: | ||
As you can see, there is no real standard for naming them, but the right switch by any other name will drive your DIN module ;)\\ | As you can see, there is no real standard for naming them, but the right switch by any other name will drive your DIN module ;)\\ | ||
When in doubt, don't hesitate to contact the distributor for clarification. This may save you some headache and some money as some do not accept returns! | When in doubt, don't hesitate to contact the distributor for clarification. This may save you some headache and some money as some do not accept returns! | ||
+ | \\ | ||
\\ | \\ | ||
===== What size/type of faders should I buy? ===== | ===== What size/type of faders should I buy? ===== | ||
Line 67: | Line 67: | ||
Trying to save money on wobbly cheap plastic faders, uh? You might hate yourself for that decision after six months of using your favorite new midi-toy. Consider that. | Trying to save money on wobbly cheap plastic faders, uh? You might hate yourself for that decision after six months of using your favorite new midi-toy. Consider that. | ||
+ | \\ | ||
+ | \\ | ||
===== What type of crystal do I need? ===== | ===== What type of crystal do I need? ===== | ||
Line 73: | Line 74: | ||
[[Crystals and Oscillators]] | [[Crystals and Oscillators]] | ||
+ | \\ | ||
+ | \\ | ||
===== I can't find a bridge rectifier to fit the PCB's. ===== | ===== I can't find a bridge rectifier to fit the PCB's. ===== | ||
You can substitute four 1N4001 (or any of the 1N400X series) for the bridge rectifier, they will handle more than enough current. | You can substitute four 1N4001 (or any of the 1N400X series) for the bridge rectifier, they will handle more than enough current. | ||
+ | \\ | ||
+ | \\ | ||
===== What Power supply should I use, and how much power should it have? ===== | ===== What Power supply should I use, and how much power should it have? ===== | ||
parts_faq.txt · Last modified: 2016/06/15 12:47 by psykhaze