Differences

This shows you the differences between two versions of the page.

--- triggermatrix4 [2021/07/31 12:53] – [CODE, FIRMWARE] phatline
+++ triggermatrix4 [2021/07/31 13:02] – phatline
@@ Line 10: / Line 10: @@
 ===== CODE, FIRMWARE =====
 **Install [[http://www.ucapps.de/mios_studio.html|MIOS Studio]], connect TM4 via USB, and Start the STUDIO**\\
+\\
 **1. Upload [[http://www.ucapps.de/mios32/mios32_bootloader_v1_018.zipm|MIOS BOOTLOADER]]**\\
 **2. (only needet for Virgin Machines) type following commands into the MIOS-TERMINAL:**\\
@@ Line 18: / Line 19: @@
   * set lcd_height 64\\
   * store\\
-**3. (for Version Updates) Upload the Triggermatrix Code:**\\
+**3. (for Version Updates) Unzip {{:phatline:TM4.zip|the TM4-Firmware}}, and Upload the TM4.hex**\\
-{{:phatline:tm_V3.zip|the Code}} FIXME upload TM4 Code\\
+**4. Unconnect USB & Connect the USB again --- finished.**\\
+**5. If the Machine is not detected by mios studio, and you already checked the usb-connections, the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "bLOAD", now you can upload new & unbroken codes, dont forget to set it to "normal" back again - after upload new code - else the APP will not boot...**\\
 ===== BUILD =====