Differences

This shows you the differences between two versions of the page.

--- coilwinder [2023/04/02 20:33] – [Main Parts] phatline
+++ coilwinder [2023/04/03 23:40] (current) – phatline
@@ Line 1: / Line 1: @@
 ====== Coil Winder ======
-**REAL:**\\
+**A Tesla Coil winding machine, controlled by Mios:**\\
-{{:phatline:tm4-perspektive-l.hd-.jpg?700|}}\\
+{{phatline:Coil-Winder-Foto.jpg?900|}}\\
 \\
+Watch German Video about using it, and TimeLapse build\\
+{{youtube>z74-LL6L-BU}}\\
+\\
+Watch English Video...
+{{youtube>NtUlX4rdx-k}}\\
 ===== CODE, FIRMWARE =====
@@ Line 38: / Line 44: @@
 days time\\
 \\
-There are a lot of wires, nuts and screw which i have not listed here, here are only the big and expensive parts://
+There are a lot of wires, nuts and screw which i have not listed here, here are only the big and expensive parts:\\
-//
+\\
-**Amazon/Ebay/Ali...**//
+**Amazon/Ebay/Ali...**\\
 Turner Motor:[[https://www.amazon.de/dp/B07YQQGQ4C?psc=1&ref=ppx_yo2ov_dt_b_product_details|
 Iverntech NEMA 17 Schrittmotor mit integrierter 400 mm T8-Leitspindel]] I dont think that is a good choice, the T8 Spindle bends to much... better you M10-M12 ones and 450mm or more Travel\\
@@ Line 63: / Line 69: @@
 \\
 Flange Bearing: [[https://www.amazon.de/dp/B01MZ2M2GC?psc=1&ref=ppx_yo2ov_dt_b_product_details|Flanschlager]] you need 2 off it...\\
+===== Menue Structure =====
+Menue 1: Load and Save Coil-Data\\
+{{phatline:Coil-Winder-Menu1.jpg?600|}}\\
+//
+Menue 2: Edit Coil-Data, and get some resulting values\\
+{{phatline:Coil-Winder-Menu2.jpg?600|}}\\
+//
+Menue 3: Start the Operation, guide thru Stages\\
+{{phatline:Coil-Winder-Menu3-stage-1.jpg?600|}}\\
+{{phatline:Coil-Winder-Menu3-stage-2.jpg?600|}}\\
+{{phatline:Coil-Winder-Menu3-stage-3.jpg?600|}}\\
+{{phatline:Coil-Winder-Menu3-stage-4.jpg?600|}}\\
+{{phatline:Coil-Winder-Menu3-stage-5.jpg?600|}}\\
+{{phatline:Coil-Winder-Menu3-stage-6.jpg?600|}}\\
 ===== Community users working on it =====
   * **[[Phatline]]** =  Programming, Documentation, Hardware-Prototype, Testing, Winding\\