Differences

This shows you the differences between two versions of the page.

--- euro-midi-io [2022/02/06 06:22] – [Building and BOM] phatline
+++ euro-midi-io [2022/02/11 15:23] (current) – [To Do] phatline
@@ Line 10: / Line 10: @@
 {{:phatline:EURO_Midi_IO_Shematic.jpg?900|}}\\
-\\
-{{:phatline:EURO_Midi_IO_Board.jpg?900|}}\\
+FIXME - The Connection from J1 to J2 is wrong - its 1:1 but it has to be crossed.\\
-\\
 ====== Hardware Requirements ======
   * Soldering Iron - with a Dip that can Handle Thruhole-Parts and 1206 SMDs, solder Paste...\\
@@ Line 72: / Line 71: @@
 You will also need M3 Screws - 2 off them...\\
 Also here it is clever to order 100 pieces for a cheaper price - you will need this on all my projects...\\
+====== PCB ======
+{{:phatline:Midi-IO-b-Gerber.zip?900|GERBER-Files Rev B for Production}}\\
+I already received and testet Rev A, i hade some small Bugs which i got fixed with some  wires...\\
+So i got it fully working... the Bugfixes are includet in Rev.B\\
+---never the less i did not testet Rev.B... since i have enough Rev.A for my whole Modular-Rack @ home\\
+so feel free to test - and report!\\
+{{:phatline:EURO_Midi_IO_Board.jpg?900|}}\\
+FIXME - dont use this - because of J1-J2 connection is wrong (this matter if you chain 2 Midi-IO-Modules\\
 ====== Frontpanel======
 {{:phatline:Euro_Midi_IO_Panel-Dimensions.jpg?900|}}\\
-**I made a DXF File which you can print, and drill it DIY  or  \\
+**I made a {{:phatline:EuroMidiIO-Panel-for-milling.zip?900|DXF}}File which you can print, and drill it DIY  or  \\
-you can send to:** (once the prototypestate is gone)\\
+you can send to:**\\
-[[https://shop.frontpanels.de/custom-panels|frontpanels.de in germany]] 17,08€ a panel (5x-10%, 10x-20%, 20x-30%, 30x-40%, 100x-50%\\
+[[https://shop.frontpanels.de/custom-panels|frontpanels.de in germany]] 17,08€ a panel (5x-10%, 10x-20%, 20x-30%, 30x-40%, 100x-50%)\\
-[[https://thebeast.co.uk/2d/|The Beast - UK]]\\
+I tested one with them - and yes they looking good - and they fit!:\\
-[[https://www.schaeffer-ag.de/en/|Schaeffer-ag.de]]
+\\
+another good guy: [[https://thebeast.co.uk/2d/|The Beast - UK]]\\
 \\
 **Recommend Material**\\
 mm x 128.5 x 17.78 Aluminium, anodised\\
-{{:phatline:Frontpanel-EuroMidi.zip?900|}} - NOT TESTET\\
 \\
 **A cheaper way is: order a 1,6mm thick Aluminium PCB as Frontpanel:**\\
-I will test this... this are the gerbers:\\
+this are the gerbers:\\
+{{:phatline:GERBER-EURO_MidiIO_FP.zip?900|}}\\
+I have testet it, and this 1.6mm Aluminium from JLCPCB is too thin, i endet up by sandwith 2 off them togehter - so its strong enough, since the Labels are reversed when use the PCB reversed - i now removed them in this gerber file!\\
 {{:phatline:Euro_Midi_IO_3D_RENDER-Panel.jpg?900|}}\\
 ====== To Do ======
-Since i already debugged Rev.A - and this is the overworked Rev.B - there should not be much to do, except to test the gerber filers... i am happy with Rev.A (have still PCBs so no check of RevB in near future!)\\
+Use a other Midi-OUT-Activity Shematic! - its not working for high speed midi! - while Note-ON off is ok, Midiclock can make trouble (the Charge-Discharge Circuit in this Design is not sufficent for this!)\\
 ====== Community users working on it ======