Differences

This shows you the differences between two versions of the page.

--- parts_faq [2016/06/15 12:47] – [Parts FAQ (Frequently Asked Questions)] psykhaze
+++ parts_faq [2016/06/15 12:47] (current) – [What is the correct polarity of the (resistor / capacitor / diode / etc)] psykhaze
@@ Line 1: / Line 1: @@
 ====== Parts FAQ (Frequently Asked Questions) ======
 \\
-{{ ::neonking:partsfaq.jpg?direct&300|}}
+{{ ::neonking:partsfaq.jpg?direct&400|}}
-\\
-\\
 ===== What wattage resistors should I buy? =====
@@ Line 18: / Line 17: @@
 **Resistors can be installed in any direction**.
-Smaller value capacitors (i.e. usually under 1 uF) generally have no polarity.  Anything above 1 uF is typically an electrolytic capacitor, and it will have a polarity marking.  Most often the "-" side is marked with a big stripe, although sometimes it's the "+" side that is marked.  (Strangely, the "+" side seems to be marked on capacitors made in U.S.A.)
+**Smaller value capacitors (i.e. usually under 1 uF) generally have no polarity**.  **Anything above 1 uF is typically an electrolytic capacitor, and it will have a polarity marking**.  Most often the "-" side is marked with a big stripe, although sometimes it's the "+" side that is marked.  (Strangely, the "+" side seems to be marked on capacitors made in U.S.A.)
 **//Diodes absolutely must be installed in the right direction//**.  Diodes have a stripe on the cathode side.