pedal_box:manual
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
pedal_box:manual [2008/10/09 23:10] – external edit 127.0.0.1 | pedal_box:manual [2009/12/15 05:52] (current) – Durisian | ||
---|---|---|---|
Line 16: | Line 16: | ||
Pedals and buttons are mapped to an event by the given bankstick number and event number. \\ | Pedals and buttons are mapped to an event by the given bankstick number and event number. \\ | ||
- | MIDI in events are matched up to a bankstick channel | + | MIDI IN events are matched up to a bankstick channel |
Line 82: | Line 82: | ||
* High Value | * High Value | ||
- | 2a. Static? \\ | + | 2a. Static? |
- | Each pedal can be set to 1 (static) or 0 (change | + | Each pedal can be set to 1 (static) or 0 (change |
- | Not Fixed Pedals | + | Pedals |
Line 189: | Line 189: | ||
Sending the screen change MIDI event takes you to the bankstick channel select. Here you can set the channel of each device loaded into your banksticks. If no bankstick is present ' | Sending the screen change MIDI event takes you to the bankstick channel select. Here you can set the channel of each device loaded into your banksticks. If no bankstick is present ' | ||
- | {{http:// | + | {{http:// |
Moving any pedal will change the channel for the selected bankstick - '>' | Moving any pedal will change the channel for the selected bankstick - '>' | ||
Line 198: | Line 198: | ||
Send the Patch Setup Event to go to the Rig Control Patch edit screen, The last pacth change will be the one that is edited. | Send the Patch Setup Event to go to the Rig Control Patch edit screen, The last pacth change will be the one that is edited. | ||
In this screen we set the bankstick to be used, listed by the device it is controlling \\ | In this screen we set the bankstick to be used, listed by the device it is controlling \\ | ||
- | {{http:// | + | {{http:// |
Use any pedal to scroll through the list \\ | Use any pedal to scroll through the list \\ | ||
Line 205: | Line 205: | ||
Send the Screen Change Event to move to the event select screen. \\ | Send the Screen Change Event to move to the event select screen. \\ | ||
- | {{http:// | + | {{http:// |
Again by moving any pedal, you can scroll though the list of events. \\ | Again by moving any pedal, you can scroll though the list of events. \\ | ||
Send the Screen Change Event to move to the value select screen. \\ | Send the Screen Change Event to move to the value select screen. \\ | ||
- | {{http:// | + | {{http:// |
Moving any pedal will change the value. \\ | Moving any pedal will change the value. \\ | ||
Line 223: | Line 223: | ||
For this. We start in the Rig Control patch setup screen (see above). \\ | For this. We start in the Rig Control patch setup screen (see above). \\ | ||
This time send the enter patch setup command again. \\ | This time send the enter patch setup command again. \\ | ||
- | {{http:// | + | {{http:// |
The top line indiates whether the relay will be triggered or not. The bottom line indicates whether it will be triggered on or off. \\ | The top line indiates whether the relay will be triggered or not. The bottom line indicates whether it will be triggered on or off. \\ | ||
To toggle the enabled line - Send the global setup event. \\ | To toggle the enabled line - Send the global setup event. \\ | ||
Line 234: | Line 234: | ||
**Setting up Gig Control Song Lists** \\ | **Setting up Gig Control Song Lists** \\ | ||
You can change the current song list by sending the song list setup midi event. This is on the channel matching the first bankstick, with cc 0x7f, and a value of 0x7c. \\ | You can change the current song list by sending the song list setup midi event. This is on the channel matching the first bankstick, with cc 0x7f, and a value of 0x7c. \\ | ||
- | {{http:// | + | {{http:// |
You can scroll the song list using any pedal connected. \\ | You can scroll the song list using any pedal connected. \\ | ||
Sending the event setup command will exit song list selection mode \\ | Sending the event setup command will exit song list selection mode \\ | ||
Alternativly you could send the screen change midi event, which takes you to the cue setup mode. \\ | Alternativly you could send the screen change midi event, which takes you to the cue setup mode. \\ | ||
- | {{http:// | + | {{http:// |
Again using any pedal, you can select the patch number you want for the first cue. \\ | Again using any pedal, you can select the patch number you want for the first cue. \\ | ||
Sending next or previous cue events, will take you through the cue list to set each cue step. \\ | Sending next or previous cue events, will take you through the cue list to set each cue step. \\ | ||
Line 381: | Line 381: | ||
In this screen we set the bankstick to be used, listed by the device it is controlling \\ | In this screen we set the bankstick to be used, listed by the device it is controlling \\ | ||
- | {{http:// | + | {{http:// |
Use any pedal to scroll through the list \\ | Use any pedal to scroll through the list \\ | ||
Line 387: | Line 387: | ||
Press Bank Up to move to the event select screen. \\ | Press Bank Up to move to the event select screen. \\ | ||
- | {{http:// | + | {{http:// |
Again by moving any pedal, you can scroll though the list of events. \\ | Again by moving any pedal, you can scroll though the list of events. \\ | ||
Press Bank Up to move to the value select screen. \\ | Press Bank Up to move to the value select screen. \\ | ||
- | {{http:// | + | {{http:// |
Moving any pedal will change the value. \\ | Moving any pedal will change the value. \\ | ||
Also at theis screen, you set whether or not the event should be enabled or disabled. If enabled, the midi event, with the high value will be sent, if disabled it will not. Toggle by pressing the 'Event Setup Button' | Also at theis screen, you set whether or not the event should be enabled or disabled. If enabled, the midi event, with the high value will be sent, if disabled it will not. Toggle by pressing the 'Event Setup Button' | ||
Line 403: | Line 403: | ||
For this. We start in the Rig Control patch setup screen (see above). \\ | For this. We start in the Rig Control patch setup screen (see above). \\ | ||
This time press the event setup button again. \\ | This time press the event setup button again. \\ | ||
- | {{http:// | + | {{http:// |
The top line indiates whether the relay will be triggered or not. The bottom line indicates whether it will be triggered on or off. \\ | The top line indiates whether the relay will be triggered or not. The bottom line indicates whether it will be triggered on or off. \\ | ||
To toggle the enabled line - Press the Global Setup Button. \\ | To toggle the enabled line - Press the Global Setup Button. \\ | ||
Line 415: | Line 415: | ||
**Setting up Gig Control Song Lists** \\ | **Setting up Gig Control Song Lists** \\ | ||
You can change the current song list by holding bank down, and pressing the button that you have setup to be 'next cue' \\ | You can change the current song list by holding bank down, and pressing the button that you have setup to be 'next cue' \\ | ||
- | {{http:// | + | {{http:// |
You can scroll the song list using any pedal connected. \\ | You can scroll the song list using any pedal connected. \\ | ||
Pressing Bank Down will exit song list selection mode and save \\ | Pressing Bank Down will exit song list selection mode and save \\ | ||
Alternativly you could press bank up, which takes you to the cue setup mode. \\ | Alternativly you could press bank up, which takes you to the cue setup mode. \\ | ||
- | {{http:// | + | {{http:// |
Again using any pedal, you can select the patch number you want for the first cue. \\ | Again using any pedal, you can select the patch number you want for the first cue. \\ | ||
Pressing bank up again and again, will take you through the cue list to set each cue step. \\ | Pressing bank up again and again, will take you through the cue list to set each cue step. \\ | ||
Line 444: | Line 444: | ||
^Function | ^Function | ||
- | |Channel | + | |Channel |
|Mode |N | |Mode |N | ||
- | |Note |Y | + | |Note |Y |
|Velocity | |Velocity | ||
- | |After Touch | + | |After Touch |
- | |Pitch Bend |N |N |N |N | | + | |Pitch Bend |Y |Y |Y |Y | |
- | |Control Change|Y | + | |Control Change|Y |
- | |Program Change|Y | + | |Program Change|Y |
- | Implementation is largly based on the Device Event List. Incoming events not listed will not be be responded too. | ||
The inbuilt MIDI merger if activated will forward all incoming events to the MIDI output (PbX and PbD) | The inbuilt MIDI merger if activated will forward all incoming events to the MIDI output (PbX and PbD) |
pedal_box/manual.1223593823.txt.gz · Last modified: 2008/10/24 11:50 (external edit)