MIDIbox

User Tools

Site Tools

Trace:
pedal_box

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
pedal_box [2010/04/13 07:37] – durisianpedal_box [2014/01/19 10:10] (current) – shuriken
Line 54: Line 54:
   * **Expression Pedals**   * **Expression Pedals**
     * Up to 8 Expression Pedals or Pedal inputs (CV / 10k pot)     * Up to 8 Expression Pedals or Pedal inputs (CV / 10k pot)
-    * Individual option for pedals to follow program change messages changing the midi messages sent+    * Individual option for pedals to be 'dynamic' by changing the midi messages sent based on the Rig COntrol Patch Change
     * Value scaled between pre-defined min and max values (can also be different for each program change)     * Value scaled between pre-defined min and max values (can also be different for each program change)
 +    * A MIDI CC can be configured to act exactly as if it were connected to an analogue in (The 8 limit still applies)
   * **LCD Display**   * **LCD Display**
     * Named Program Changes     * Named Program Changes
Line 81: Line 82:
     * Up to 128 patches can be listed in any order     * Up to 128 patches can be listed in any order
     * Cue Next / Cue Previous can be done from any button or a MIDI IN event     * Cue Next / Cue Previous can be done from any button or a MIDI IN event
 +  * **PedalSwap**
 +    * Allows dynamic pedals to change there midi settings without utilizing Rig Control
   * PC Editor files allows easy...ish customization for different MIDI devices.    * PC Editor files allows easy...ish customization for different MIDI devices. 
   * Settings configurable from box. (this is a very slow process but can you help you out in pinch, it's far quicker to use the PC Editor). \\    * Settings configurable from box. (this is a very slow process but can you help you out in pinch, it's far quicker to use the PC Editor). \\ 
Line 104: Line 107:
 ^Gig Control Via MIDI  |  Y  |  Y  | ^Gig Control Via MIDI  |  Y  |  Y  |
 ^Gig Control Via DIN   |  N  |  Y  | ^Gig Control Via DIN   |  N  |  Y  |
-^Setup Via MIDI        |  Y  |  N* |+^PedalSwap Via MIDI    |  Y  |  Y  | 
 +^PedalSwap Via DIN     |  N  |  Y  | 
 +^Setup Via MIDI        |  Y  |  Y  |
 ^Setup Via DIN         |  N  |  Y  | ^Setup Via DIN         |  N  |  Y  |
 ^External Pedal Input  |  Y  |  Y  | ^External Pedal Input  |  Y  |  Y  |
Line 161: Line 166:
 </box> </box>
  
 + \\ 
 + \\ 
 + \\ 
 + \\ 
 + \\ 
 + \\
 + \\ 
 + \\ 
 + \\
 + \\ 
 + \\ 
 + \\
 + \\ 
 + \\ 
 + \\
 + \\ 
 + \\ 
 + \\
  
  
Line 167: Line 190:
  
 ======Manual====== ======Manual======
-Pedal Box / Pedal Board [[pedal_box:manual]]+[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]
  
-PC Editor Manual [[pedal_box:pc_editor_manual|manual]]+Help can be found in the [[http://midibox.org/forums/topic/9081-the-pedal-box-and-pedal-board-thread | Pedal Box forum thread ]]
  
-Help can be found in the [[http://www.midibox.org/forum/index.php/topic,9770.30.html | Pedal Box forum thread ]]+ \\  
 + \\ 
  
  
Line 388: Line 412:
 <box 46% left round bluedark|Device Bankstick Downloads> <box 46% left round bluedark|Device Bankstick Downloads>
  
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2FDevice_Config_Files%2FV-Amp%2FV-Amp.zip|Behringer V-Amp Series]] +{{:mcrozier:v-amp.zip|Behringer V-Amp Series}} 
  
 </box> \\  </box> \\ 
  
 <box 46% left round|PC Editor>  <box 46% left round|PC Editor> 
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Feditor%2Fv2%2FPBEditor2.zip|Pedal Board Editor 2 v1.0]]+{{:mcrozier:pbeditor2.zip|Pedal Board Editor 2 v1.0}} \\  
 +Please note the editor requires a minimum of WinXP with .Net 3.5 \\ 
  
 </box> </box>
- +<box 98% round|Docs> 
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]+{{:mcrozier:pb_manual.pdf|The Complete Usage Manual}}</box>
 ---- ----
  
Line 426: Line 451:
  
  
-Please report bugs in the [[http://www.midibox.org/forum/index.php/topic,9770.30.html | Pedal Box forum thread ]]+Please report bugs in the [[http://midibox.org/forums/topic/9081-the-pedal-box-and-pedal-board-thread | Pedal Box forum thread ]]
  
  
Line 585: Line 610:
 The shift register of the 1st digit (the one's display) must be defined in pbx_config.h \\  The shift register of the 1st digit (the one's display) must be defined in pbx_config.h \\ 
 The second digit (ten's) will be automatically assigned to the next shift register. The second digit (ten's) will be automatically assigned to the next shift register.
 +
 +If only 1 digit is used, and bank goes higher than 9. The dot will light up to let you know that '0' is actually 10, '1' is actually 11, etc \\ 
  
 In place of LED digits. A 2x20 LCD Display can be used (instead of 2x16). The last 4 charcters of each line are used for bank display. This will only happen when DIGITS_CONNECTED = 0 in pbx_config.h. In place of LED digits. A 2x20 LCD Display can be used (instead of 2x16). The last 4 charcters of each line are used for bank display. This will only happen when DIGITS_CONNECTED = 0 in pbx_config.h.
Line 613: Line 640:
 ==== Connection Overview ==== ==== Connection Overview ====
 {{http://www.durisian.com/midibox/PB/images/pbd_din_dout_connections.jpg}}  {{http://www.durisian.com/midibox/PB/images/pbd_din_dout_connections.jpg}} 
 +
 +**Please Note:** Default connections have changed since 2.6. The default has only one digit connected to SR 5. With bank and PedalSwap footswitches and LED's attched to SR 4
 +
  
 Pedal Board Test Bench \\  Pedal Board Test Bench \\ 
Line 625: Line 655:
 I only built Pedal Box, so I use the Behringer FCV100 Foot Pedal in CV mode. But here's some links that came up on the forum. I only built Pedal Box, so I use the Behringer FCV100 Foot Pedal in CV mode. But here's some links that came up on the forum.
  
-  * [[http://www.banzaieffects.com/Pushbutton-Footswitches-Momentary-c-333.html | Banzai Effects]] stock a good range of momentary footswitches - perfect for this project+  * [[http://www.banzaimusic.com/Pushbutton-Footswitches-Momentary | Banzai Effects]] stock a good range of momentary footswitches - perfect for this project
   * [[http://www.smallbearelec.com/|Small Bear Electronics]] Specializes in DIY guitar sound effects   * [[http://www.smallbearelec.com/|Small Bear Electronics]] Specializes in DIY guitar sound effects
   * stryd_one offered this google search for momentary footswitches. [[http://www.google.com.au/search?safe=off&q=momentary+SPST+footswitch]]   * stryd_one offered this google search for momentary footswitches. [[http://www.google.com.au/search?safe=off&q=momentary+SPST+footswitch]]
Line 656: Line 686:
 {{mcrozier:pedal_board_max.jpg}}  \\  {{mcrozier:pedal_board_max.jpg}}  \\ 
 You know you want to build it! You know you want to build it!
- 
- 
- 
pedal_box.1271144255.txt.gz · Last modified: 2010/04/13 07:37 by durisian