Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| tpd_pcb [2025/01/25 22:32] – [Where to buy?] no more kits available ilmenator | tpd_pcb [2025/09/21 08:36] (current) – [Config] typo fixed ilmenator |
|---|
| |
| ==== Where to buy? ==== | ==== Where to buy? ==== |
| If you are interested in building this, send a personal message (PM) to user //ilmenator// over at the [[http://midibox.org/forums/|MIDIbox forum]] (you have to register to be able to send PM). As of January 2025, I have PCBs (both the original TPD as well as the Euro TPD, see below) available for 10€ each. | If you are interested in building this, send a personal message (PM) to user //ilmenator// over at the [[http://midibox.org/forums/|MIDIbox forum]] (you have to register to be able to send PM). As of September 2025, I have PCBs (both the original TPD as well as the Euro TPD, see below) available for 10€ each. |
| |
| ===== Euro TPD format ===== | ===== Euro TPD format ===== |
| A config file suitable for use with the TPD module chained after my [[http://www.midibox.org/dokuwiki/doku.php?id=16x4blm_pcb|BLM module]] can be found {{:home:users:ilmenator:tpd_mbseq_hw.zip|here}}. An example configuration (TPD directly connected to J2 of Wilba's Frontpanel PCB) can be found in the [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba_tpd%2FMBSEQ_HW.V4|repository]]. | A config file suitable for use with the TPD module chained after my [[http://www.midibox.org/dokuwiki/doku.php?id=16x4blm_pcb|BLM module]] can be found {{:home:users:ilmenator:tpd_mbseq_hw.zip|here}}. An example configuration (TPD directly connected to J2 of Wilba's Frontpanel PCB) can be found in the [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba_tpd%2FMBSEQ_HW.V4|repository]]. |
| |
| Some users have reported problems when the TPD is not the last module in the DIN/DOUT chain, presumably because the are 9 DOUTs on this module, but just one DIN, which in turn leads to an unbalanced serial output, see [[http://midibox.org/forums/topic/19801-tpd-blm-16x4/|this post]]. It seems best to simply put the TPD at the end of the serial chain. | Some users have reported problems when the TPD is not the last module in the DIN/DOUT chain, presumably because there are 9 DOUTs on this module, but just one DIN, which in turn leads to an unbalanced serial output, see [[http://midibox.org/forums/topic/19801-tpd-blm-16x4/|this post]]. It seems best to simply put the TPD at the end of the serial chain. |
