====== Fadercore ======

Fadercore is a Project to make a replicable and scaleable Fadermodule that can be used for DAW proposals.

I started 2010 with that idea because i was Live Engineer of a concert Location. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly my purposes changes. Now its just a fun Projekt to learn how to design an Electronic Product. 

The goal of Fadercore is to make a Modul of 8 Faderstrips where every strip has 1 Oled, 3 Buttons and one Encoder and is scaleable up to 32 Faders (4 Modules)

The Heart of a Fadercore is a STM32F4Demo or a LPC17Core with a special Header for Display chains... 

===== Frontpanel =====

{{:fadercore_frontpanel.png?200|}}



===== Diagram of System =====

{{:fadercore-blockdiagramm.png?600|}}




===== The follwoing steps are to be done: =====

Make a board that has connections to 32 displays. - done

Make a board that has connections to 8 Encoders with LED rings. - done

Make a Faderboard that connects 8 Motorized Faders to the Core board. - done but has to be redone for STM32F4Demo

Make a board that connects to 24 Buttons and min. 48LEDs if not (RGB) 72LEDs. 

Make a Frontpanel. - depends on Buttonboard...

Make a Case that is scaleable so it is Possible to rise the number of Fadermodules...

Make a Demosoftware .NGC file that can be used from Midibox newbies... :-)

Make a Board that holds the Matrix for small meters.

'
'



===== More details to the Project Parts: =====

[[fadercore - VLR-8oDisp|VLR-8oDISP]]

[[Fadercore - VLR-Motorfader|VLR-Motorfader]]

[[Fadercore - VLR-8Enc|VLR-8Enc]]

[[Fadercore - VLR-3x8But|VLR-3x8But]]

[[Fadercore - VLR-8x16LEDmeter|VLR-8x16LEDmeter]]

[[fadercore - VLR-Frontpanel|VLR-Frontpanel]]

[[fadercore - VLR-Case|VLR-Case]]



For Questions PM : Novski