====== MB SEQ functions - quick reference ====== Detailed info for options and functions is available at [[http://www.ucapps.de/midibox_seq_manual_m.html]] \\ Print-friendly (on two A4 sheets) xls version available here {{:mbseq_prn_.zip|}} \\ ^ # ^ Function ^ Description / Options ^ | ||| ^ **Dedicated button functions** //(these can vary depending on panel design and MBSEQ_HW.V4 file)// ^^^ | 1 \\  | **Pattern**\\ 1,2,3,4 | Select pattern/track group - G1, G2, G3, G4 \\  | | 2 \\  | **Track**\\ 1,2,3,4 | Select track within track group - T1, T2, T3, T4. 16 tracks are available in total \\  | | 3 \\  | **Trigger layer**\\ A,B,C | Select trigger layer A or B or C. Holding C opens trigger layer selection menu and allows to select others\\  | Gate | Acc | Roll | Glide | Skip | R.G(random gate) | R.V(random value) | No FX | \\ | | 4 \\  \\  | **Parameter layer**  \\ A,B,C \\  | Select parameter layer A and B. C switches between C & D or with //Press&Hold// open parameter layer selection menu and to select others. \\ Four parameter layers available by default, but CC, Pitch, Prob, Delay can be added __via trigger selection menu //(?)//__ FIXME\\  | Note | Vel | Length | Roll | | | 5 \\  | **Step View** \\  | View and select steps if more than 16 are used\\  | 1..16 | 17..32 | ...etc | | 6 \\  | **Pattern** \\  | Select/load pattern/track group G1, G2, G3, G4 from SD memory location \\  | | 7 \\  | **Song** \\  | Select song parameters\\  | Song # | Position | Action{Stop; x1..x16; Jump Pos; Jump Song; Mixer; Tempo; Mutes} || Select patterns: G1,G2,G3,G4 | | | 8 \\  | **Edit** \\  | Enter edit mode to edit parameter layer step values and set trigger layer steps \\  | | 9 \\  | **Mute** \\  | Quickly mute/unmute tracks 1...16 \\  | | 10  \\  | **Solo** \\  | Solo current track \\  | | 11 \\  | **<-/->** \\ //(Left/Right)// | Move cursor position. //Left// has limited usage\\  | | 12 \\  | **+/-** \\ //(Inc/Dec)//| Same as //Jog Dial// encoder - increases/decreases the current value\\  | | 13 \\  | **Exit** \\  | Quickly exit to top (Session) menu. \\  | (return to previous menu) | Mute Tracks | Open | Save | Save as | New | Info |  | | 14 \\  | **Select** \\  | //(Press&Hold)// Select steps to be controlled by //All// function. //Select// brings additional options in several other menus as well \\   | | 15 \\  | **All** \\  | Edit all selected steps set with //Select// function\\  | | 16 \\  | **Copy** \\  | Copy steps from selected # to #. Step # can be edited by //Select// function\\  | | 17 \\  | **Paste** \\  | Paste copied steps starting from # step. Step # can be edited by //Select// function\\  | | 18 \\  | **F1**\\ //(Clear)// | //(Press&Hold)// Wipe selected track. Other functions can be assigned in MBSEQ_HW.V4 file\\  | | 19 \\  | **F2**\\ //(Select track)// | //(Press&Hold)// Select track. Other functions can be assigned in MBSEQ_HW.V4 file\\  | | 20 \\  | **F3**\\ //(Select parameter layer)// | //(Press&Hold)// Select parameter layer A,B,C,D...etc. Other functions can be assigned in MBSEQ_HW.V4 file\\  | | 21 \\  | **F4**\\ //(Select trigger layer)// | //(Press&Hold)// Select/assign trigger layer 1..8. Other functions can be assigned in MBSEQ_HW.V4 file\\  | | 22 \\  | **Rec** \\  | Open record menu\\  | Track # | Record{Live; Step} | Mode{Mono; Poly} | AStart{on; off} | Step # | TglGate || Port # | Chn # | | | 23 \\  | **<<** \\  | Rewind. Active only in song mode\\   | | 24 \\  | **Stop** \\  | Stop playback and reset position to beginning \\  | | 25 \\  | **Play** \\  | Start playback of patterns/song \\  | | 26 \\  | **Pause** \\  | Halt/resume playback \\  | | 27 \\  | **>>** \\  | Forward. Active only in song mode\\   | | 28 \\  | **Metronome** \\  | Toggle metronome on/off \\  | | 29 \\  | **Fast** \\  | Activate //Fast// mode for quicker value selection with encoders. Speed options for //Fast// can be changed in MBSEQ_HW.V4 file\\  | | 30 \\  | **Scrub** \\  | //(Press&Hold)// + //Jog Wheel// dynamically change actual position\\  | ^ **Menu functions** ^^^ | 31 \\  | **Menu+Scrub** \\  | Toggle loop mode on/off\\  | | 32 \\   | **Menu+Metronome** \\   | External restart used to synchronize playback starting from next step\\   | | 33 \\  | **Menu+GP1**\\ //(Mixer)// | Open mixer view for 16 tracks. 12 pages can be switched with +/-. An additional options available with //Select// button __//More details?//__ FIXME \\  | Midi port | Midi channel | Prog change | Volume | Panorama | Reverb | Chorus | CC1 | CC2 | CC3 | CC4 | | | 34 \\  | **Menu+GP2**\\ //(Event)// | Open track setup editor\\  | Track # | Type{Note; Chord; CC; Drum} | Step # | ParL # | TrgL # | Port # | Chn # | Edit Name | | | 35 \\  \\  | **Menu+GP3**\\ //(Mode)// \\  | Open track mode editor\\  | Track # | Track on/off | Normal, Transpose, Arpeggiator | \\  | Hold{on; off} | Sort{on; off} | Restart{on; off} | Scale{on; off} | Sustain{on; off} | | | 36 \\  \\  | **Menu+GP4**\\ //(Direction)//\\   | Open track playback direction editor\\  | Track # | Select playback mode: Forward, Backward, PingPong, Pendulum, Rand.Dir, Rand.Step, Rand.D+S | \\  | Fwd # | Back # | Replay # | Repeat # | Skip # | Itv # | SyncM{yes; no} | | | 37 \\  | **Menu+GP5**\\ //(Divider)// | Open track clock divider setup editor\\  | Track # | Clock # | Divider{normal; triplet} | Sync to Measure{on; off} || Timebase selector: 1, 2, 4, 8 ..etc | | | 38 \\  | **Menu+GP6**\\ //(Length)// | Open track length editor\\  | Track # | Length # | Loop # || Quick length selection: 4, 8, 16 ..etc | | | 39 \\  | **Menu+GP7**\\ //(Transpose)// | Open track transpose editor\\  | Track # | Transpose selector: -7 oct ... +7 oct | -7 sem ... +7 sem | | | 40 \\  | **Menu+GP8**\\ //(Groove)// | Open track groove editor\\  | Track # | Groove style{off; shuffle ... etc} | Intensity # || Step # | Dly # | Len # | Vel # | Num Steps # | | | 41 \\  | **Menu+GP9**\\ //(Trigger)// | Open track trigger layer selection menu\\  | Gate | Acc | Roll | Glide | Skip | R.G(random gate) | R.V(random value) | No FX | | | 42 \\ \\  \\  \\  \\  \\  \\  \\  | **Menu+GP10**\\ //(FX)//\\  \\  \\  \\  \\  \\  \\  | Open FX editor\\  | Local{Echo; Hum; Limit; LFO} || Global{Loop; Scale} | \\   ·[Echo] | Track # | Repeats # | Delay # | Vel.Lev # || FB Velocity % | Note # | Gatelen % | Tcks % | \\   ·[Hum] | Track # | Intensity # | Note{on; off} | Vel/CC{on; off} | Length{on; off} | \\   ·[Limit] | Track # | Lower # | Upper # | \\   ·[LFO] | Track # | Wave{off; sine ..etc} | Amp # | Phs % | Steps # | Rst # | OneShot{on; off} |\\     | Note{on; off} | Vel{on; off} | Len{on; off} | CC{on; off} | ExtraCC # | Offs # | PPQN # \\   ·[Loop] | Mode{all tracks / step view ..etc} | Offset # | Steps # | Loop{on; off]} \\   ·[Scale] | Control{global, G1, G2 ..etc} | Root{Keyb, C ...etc} | Selected scale{major; minor ...etc} \\ | | 43 \\  | **Menu+GP11**\\ //(Manual trigger)// | Manually trigger steps, //(Press&Hold)+Select// for sync to measure\\  | | __//options?//__ FIXME | | 44 \\  | **Menu+GP12**\\ //(Morph)// | Open track morphing setup\\  | Track # | Mode{on; off} | Dst.Range # | Value # || Morphing control (also by CC1) | | | 45 \\  \\  | **Menu+GP13**\\ //(BPM)//\\  | Open BPM settings editor \\  | Mode{Auto; Slave; Master} | Preset # | Tempo # | Ramp sec. | Fire Preset | Preset Page |\\  | MClk{USB1 ..etc} | In{-,on} | Out{-,on} | Din PPQN # | Ext.Restart | Tap Tempo | | | 46 \\  | **Menu+GP14**\\ //(Save)// | Open save patterns/tracks menu\\  | Group # | Location # | Target # | Save || Category | Label | | | 47 \\  \\  \\  \\   | **Menu+GP15**\\ //(MIDI)//\\  \\  \\   | Opens midi setup editor \\  ·[Transpose and arp] Port # | Chn # | T/A Split{on; off} | Midd.Note # | Reset Stcks\\  ·[Section Control] Port # | Chn # | G1 # | G2 # | G3 # | G4 # | Fwd port | Reset Stcks\\  ·[Midi Router] Node # | In port | Chn # | Out port | Chn # | Default Port\\  ·[Misc] BLM_Scalar port{on; off} | Midi Monitor | | 48 \\   | **Menu+GP16**\\ //(SysEx)// | SysEx operations __//Options?//__ FIXME\\   | ^ **Utility functions** ^^^ | 49 \\  | **Utility+GP1**\\ //(Track Select)// | Select active track \\  | | 50 \\  | **Utility+GP2**\\ //(Copy)// | Copy steps from selected # to #. Step # can be edited by //Select// function\\   | | 51 \\  | **Utility+GP3**\\ //(Paste)// | Paste copied steps starting from # step. Step # can be edited by //Select// function\\   | | 52 \\  | **Utility+GP4**\\ //(Clear)// | Wipe the track. **No options - Wipes the track instantly!!!**\\   | | 53 \\  | **Utility+GP5**\\ //(Move)// | Move selected steps (like copy and paste together)\\  | | 54 \\  | **Utility+GP6**\\ //(Scroll)// | Scroll the steps across\\  | | 55 \\  | **Utility+GP7**\\ //(Random)// | Generates random events\\  | Track # | Generate | Clr | Util | Undo || LayerA # | LayerB # | LayerC # | TrgA # | Trg B # | Trg C # | \\ | | 56 \\  | **Utility+GP8**\\ //(Undo)// | Undo last //Paste, Clear, Move, Scroll, Random// operation\\  | | 57 \\  | **Utility+GP9**\\ //(Save)// | Open save menu\\  | Group # | Location # | Target # | Save || Category | Label | \\ | | 58 \\  | **Utility+GP10**\\ //(Record)// | Open record menu\\  | Track # | Record{Live; Step} | Mode{Mono; Poly} | AStart{on; off} | Step # | TglGate || Port # | Chn # | | | 59 \\  | **Utility+GP11**\\ //(Mixer)// | Open mixer view for 16 tracks. 12 pages can be switched with +/-. An additional options available with //Select// button __//More details?//__ FIXME \\  | Midi port | Midi channel | Prog change | Volume | Panorama | Reverb | Chorus | CC1 | CC2 | CC3 | CC4 | | | 60 \\  \\  | **Utility+GP12**\\ //(Options)// \\  | Open options menu\\  | Measure # | Pattern # | SyncChange (on, off) | Paste/Clr steps | \\  | Remote{auto;client;server} | ID # | Port # | Request connection{no} | | | 61 \\  | **Utility+GP13**\\ //(Port Mute)// | Access output port muting menu\\  | Def | USB1 | USB2 ...etc... AOUT | Bus1 | Bus2 | | | 62 \\  | **Utility+GP14**\\ //(Disk)// | Open disk menu\\  MSD USB{disabled; enabled/Pres&Hold/} | Midi files{import; export; play} | | 63 \\  | **Utility+GP15**\\ //(Mute)// | Quick mute of all tracks/channels \\  | | 64 \\  | **Utility+GP16**\\ //(Unmute)// | Quick unmute of all tracks/channels \\  | **To do:** * check descriptions and options for all functions in this quick reference * fix/complement all "fixme" issues * add //highlight// and //fontcolor// [http://www.dokuwiki.org/plugin:fontcolor] plugins so that font/background color of the options can be changed \\