MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 16th fixed PolySequencer ======
{{:phatline:16th_fixed_poly-footboard.jpg?800 |}}
{{:phatline:16th_fixed_poly-test-setup.jpg?800 |}}\\

===== Specs ?=====
**4 Midi-Channels: 1 2 3 4**\\
--2 Tracks a Channel\\
--8 Notes-Chord a Track\\
--each track has a dedicated and changeable loop-length from 16 to 256 Steps (example for 4-4)\\
--each Track can played single and booth tracks can be played simultan/in-dual\\

**Fixed Velocity @ 127**\\
--no Keyboard-Velocity-sense ([[Triggermatrix]] does the job of sensing drum trigger in order to re-trigger the moldy buffer\\

**16th fixed note-trigger-rate**\\
--puts out note-data in 16rate (in order to provide a steady note stream for [[Triggermatrix]])\\
--a connected [[Triggermatrix]] (allows not only 4-4, all other things like 5-4 are possible!)\\
--[[Triggermatrix]] does the job of melody-rythm-re-triggering}\\

**512 Songs saved on SD-Card**\\
--Load-able while playing - when the beat-structure is the same\\

===== the Midi-System-Setup =====
--fixed/hardcoded (Midi-Ports, Midi-Channels))\\

**MidiPort 32-in:**\\
--Midi-Clock-Source, Start-Stop, ProgramChange @ MidiChannel 1\\

**MidiPort 33-in:**\\
--connected to a Midikeyboard @ MidiChannel 1\\

**MidiPort 33-out:**\\
--connected to [[Triggermatrix]] -Melody-In-Port, or a poly-synth)\\


===== Footboard-Interface =====
  * Footboard/old Pulp-Radio-like wiring!\\
  * 2x8 Foot-Tactial-Buttons + 2xBank-Tactial-Buttons\\
  * 2x8 LEDs to Display Foot-Buttons-Status\\
  * 2x4 Bank indication Leds\\
  * 2x Foot-Tactial-Button-Banks\\ 
  * [[http://wiki.midibox.org/doku.php?id=stm32f4_module&s[]=core32|CORE32 STM32F4]]\\
  * [[http://ucapps.de/mbhp_lcd.html|3x LCD with 2x40-Signs, to display Chord-Notes, for sequenced notes and keyboard-inut-notes]]\\
  * [[http://ucapps.de/mbhp_midi_io.html|2x  Midi IO]]\\
  * 8x 15Led-LedRings\\
  * 2x DoutX4 Modules\\
  * 1x DinX4 Modules\\
  * cables, isolaton material, solder \\
  * wood, Screws, Drills, Drilling-Machine, a saw for the Display-Cut-Outsl, a Fill\\
  * M3 Distance-Stamps to mount the pcps\\
  * SD-Card\\

===== fabricated PCB-Version ===== 
not planed!
===== Community users working on it =====
  * **[[Phatline]]** =  Programming, Documentation, Hardware-Prototype

===== Getting Involved ? =====

Just let a Private message on the forum to user already involved
MIDIbox

User Tools

Site Tools

Page Tools
