Differences

This shows you the differences between two versions of the page.

--- ain_4 [2016/08/18 08:42]
latigid_on [BOM v1.2]
+++ ain_4 [2016/08/18 09:36] (current)
latigid_on [Standalone use]
@@ Line 79: / Line 79: @@
 ==== Headers ====
-For connection to a [[Control Board]], use pin headers placed on the opposite side as the rest of the components i.e. follow the silkscreen markings. For standalone use, you probably want header pins (or sockets, or even bare wires if you wish) on the same side as the remaining circuitry.
+For connection to a [[Control Board]], use pin headers placed on the opposite side as the rest of the components i.e. follow the silkscreen markings. It's convenient to use an **unsoldered** Control Board to align all of the pins at once.\\
+For standalone use, you probably want header pins (or sockets, or even bare wires if you wish) on the same side as the remaining circuitry.
 ----
@@ Line 86: / Line 88: @@
 ==== Standalone use ====
-For simplest results, use the complementary [[Control Board]]. Otherwise see below for header functions.
+For simplest results, use the complementary [[Control Board]]. Otherwise see below for header functions (viewed from the component side).

MIDIbox