User Tools

Site Tools


ain_module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ain_module [2007/08/17 03:20]
nebula added parts list link
ain_module [2016/08/05 15:46] (current)
psykhaze ↷ Links adapted because of a move operation
Line 1: Line 1:
-AIN module is used to connect potentiometers to the Midibox. It's also possible to use other 0-5V analog voltage sources.\\ +====== ​AIN Module ======
-(For examples see: [[http://​www.ucapps.de/​midibox_ext.html|Midibox Extensions]] page)+
  
-[[http://​www.ucapps.de/​mbhp_ain.html|AIN Module]] <​sup>​uCApps</​sup>​ +**AIN** means "​Analog Input"Analog is meant as a range; in terms of voltage this range is normally from 0 to 5 V, in terms of programming this is normally a 10bit value from 0 to 1023.  
-[[ain board parts list]]+It's quite clear if you see this in contrast to the Digital Inputs (via [[DIN Module]]), which know just two states: on or off, 1 or 0.
  
-* [[http://​sound.westhost.com/​pots.htm|sound.westhost.com/​pots.htm]] interesting background informations about pots+The AIN module is normally used to connect potentiometers to the Midibox, usually these two types: 
 +  * circular ​pots => Turning knobs 
 +  * linear ​pots => Faders
  
 +:!:
 +**Potentiometers (also "​Pots"​) should have a typical resistance value of 10 kΩ.**
 +
 +[[Motorfader]] have to be connected to a special module called [[mf_ng_module]].
 +
 +It's also possible to use other 0-5V analog voltage sources. The [[ACSensorizer]] is a user project especially developed for AIN sources (like sensors) that do not deliver 0-5V exactly.
 +
 +The AIN module uses CMOS 4051 multiplexer ICs, each of which provides 8 analog inputs. ​ The most common AIN configuration is sometimes referred to as AINX4, because it has 4 such ICs, for a total of 32 inputs. ​ Two AINX4 boards can be cascaded for a total of 64 inputs. ​ Alternatively,​ an AIN module could be populated with as few as one 4051, if 8 or fewer inputs are required. ​ In MIDIbox-jargon,​ this could be called AINX1.
 +
 +The AIN module(s) connect to J5 on the [[core module]].
 +\\
 +
 +====== See also ======
 +  * [[http://​www.ucapps.de/​mbhp_ain.html|AIN Module]] <​sup>​uCApps</​sup>​\\
 +  * [[ain board parts list]]
 +  * [[ACSensorizer]]
 +  * [[http://​www.ucapps.de/​midibox_ext.html|Midibox Extensions]] page
 +  * [[http://​sound.westhost.com/​pots.htm|sound.westhost.com/​pots.htm]] interesting background informations about pots
ain_module.1187320816.txt.gz · Last modified: 2007/08/17 03:20 (external edit)