Differences

This shows you the differences between two versions of the page.

--- ain_module [2007/08/27 16:09]
audiocommander added some more infos...
+++ ain_module [2016/08/05 15:46] (current)
psykhaze ↷ Links adapted because of a move operation
@@ Line 11: / Line 11: @@
 **Potentiometers (also "Pots") should have a typical resistance value of 10 kΩ.**
-[[Motorfaders]] have to be connected to a special module called [[MF Module]].
+[[Motorfader]] have to be connected to a special module called [[mf_ng_module]].
-It's also possible to use other 0-5V analog voltage sources. The [[ACSensorizer]] is a user project especially developed for AIN sources (like sensors) that do not deliver 0-5V exactly.\\
+It's also possible to use other 0-5V analog voltage sources. The [[ACSensorizer]] is a user project especially developed for AIN sources (like sensors) that do not deliver 0-5V exactly.
+The AIN module uses CMOS 4051 multiplexer ICs, each of which provides 8 analog inputs.  The most common AIN configuration is sometimes referred to as AINX4, because it has 4 such ICs, for a total of 32 inputs.  Two AINX4 boards can be cascaded for a total of 64 inputs.  Alternatively, an AIN module could be populated with as few as one 4051, if 8 or fewer inputs are required.  In MIDIbox-jargon, this could be called AINX1.
+The AIN module(s) connect to J5 on the [[core module]].
+\\
 ====== See also ======
@@ Line 21: / Line 26: @@
   * [[http://www.ucapps.de/midibox_ext.html|Midibox Extensions]] page
   * [[http://sound.westhost.com/pots.htm|sound.westhost.com/pots.htm]] interesting background informations about pots

MIDIbox

User Tools

Site Tools

Differences

Page Tools