MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

AOUT modules generate analog voltages (and gate signals) controlled by Midibox. Usually these are used to drive Analog Synthesizers.

The following modules are available:

[[http://www.ucapps.de/mbhp_aout.html|AOUT Module]] <sup>uCApps</sup>\\
(Uses the expensive and somewhat hard-to-find MAX525 DACs and MAX6007 voltage reference.  What appears to be a suitable drop-in replacement for MAX6007B appears in [[http://www.midibox.org/forum/index.php/topic,13490.0.html|this thread]]:  the TI LM4040A20IDBZR [[http://www.ti.com/lit/gpn/LM4040A20|(datasheet)]].\\
[[http://www.ucapps.de/mbhp_aout_lc.html|AOUT_LC Module]] (low cost AOUT Module)<sup>uCApps</sup>\\
[[aout_ng|AOUT_NG Module]] (new AOUT Module)\\

The SHX8 module is used to extend the number of AOUT outputs using Sample and Hold chips

[[http://www.ucapps.de/mbhp_shx8.html|SHX8 Module]] (expands AOUT Module < 64 CV Outputs) <sup>uCApps</sup>\\
(expired, S&H chips are discontinued/obsolete)\\

MIDIbox

User Tools

Site Tools

Page Tools