Differences

This shows you the differences between two versions of the page.

--- case_and_frontpanels_diy_common_tools [2016/06/05 17:00]
psykhaze created
+++ case_and_frontpanels_diy_common_tools [2016/06/27 13:36] (current)
psykhaze [Laser Cutting]
@@ Line 1: / Line 1: @@
-======Case And FrontPanel DIY Tools======
+====== Case / FrontPanel DIY Tools======
-===== Screwdrivers =====
+{{ ::neonking:frontpanel.jpg?direct&500 |}}
-===== Drill =====
+===== Measurement =====
+  * Flexible Steel Ruler with Cork backing - From Arts stores. An excellent idea that I stole ;)
+  * Calipers - For measuring drill bits, shaft diameters, and hole diameters
+  * Clamps/Vices - Various sizes and shapes, for holding things still while you drill/saw/bust them up
+=====Drilling=====
+  * Rotary Tool
+  * Drill Press - For accurate drilling of PCB's and faceplates
+  * Drill bit set
+  * Router bit set
+  * Nibbling tool - for making odd shaped holes (Careful! These can be savage)
+  * Reamer - for making odd shaped holes
+  * Center punch - For marking the location of holes to be drilled and scribing lines on metal
+=====Abrasive/Cutting=====
+  * File Set - Flat, round, half round, rasp and needle
+  * Hacksaw - For cutting solid objects
+  * Spare Hacksaw Blades - For use by hand
+  * Coping Saw - For cutting holes in cases
+  * Razor Knife - Stanley/X-Acto, etc. NOT for use on plastic cases unless you have a death wish

MIDIbox