MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CC-Looper ======
CC-Automation\\
Midi Control Change MotionSequencer - for Synthesizer with LEDRINGS\\
{{:phatline:CCL-pcb-foto.jpg?500|}}\\
===== Features =====
 * 4Midichannels @ each 512Steps X 32th-looprate X 128 CCs \\
 * only a few of the 128CC should be used @ once - 4x128xCCs @ 32th is Midi Data MESS and µC Death\\
 * maybe only 256Steps, will depend on RAM.... RealWorld will tell\\
 * each TRACK has a shared Track length for all its 128 CCs\\
 * Copy, Paste, Clear: for the all 128CCs/or single CC\\
 * There is no EDIT, you can clear a CC or Track and make a new Take\\
 * ProgramChange Load and Store on microSD-Card, Load and Store are CC-Commands, so you can remote the device\\
 * The Sequencer can be set to Tact Systems: 3/4 4/4 5/4 7/4 9/4 11/4 13/4 

====== Hardware Requirements ======
**External Requirement:**(for example)
  * You need a Synth with LEDRINGs - otherwise you have no Feedback and Overview - NordRack III is such one\\ 
  * Melody/Clock Source with ProgramChange-Output: [[mididocs:midibox_seq_v4l]] oops that dont do PC...\\
  * Melody/Clock/CC Destination: NordRack III or any other Synth with Visual Feedback off CC-States\\

**Midibox:**\\ 
  * [[http://wiki.midibox.org/doku.php?id=dipcoref4|dipcoref4]] - this is the µC Brain for the Looper\\
  * [[http://wiki.midibox.org/doku.php?id=cc-looper|cc-looper]] - this is the UI-PCB of the Looper\\
  * no other PCBs needet

  * µSD-Card, formated with FAT32\\
  * Soldering Iron - with a Dip that can Handle SMD-Parts, Wires, solder Paste for the µC....\\
  * USB Power Supply with µUSB-Connector\\

==== Set ====

== Cabeling ==
Midi IN1 >>> MelodySequencer and Remote Devices\\
Midi IN2 >>> Midi Out from Synthesizer  -  which sends out the Moved CCs\\
Midi OUT >>> Midi IN of Synthesizer input (Automated CCs merged with mididata from Midi IN1)\\

====== Software ======

===== Firmware =====
FIXME Firmware not made yet

====== Building ======
{{:phatline:CCL-sheme.png?700|}}\\
{{:phatline:CCL-pcb.png?500|}}\\
{{:phatline:CCL-pcb-3dfront.png?500|}}\\

==== Frontpanel ====
FIXME - a clear Acrylic Frontplate, with NO Engravings, UI-Labeling is viewable from PCB\\

==== Case ====


===== BOM =====


===== To Do =====
alot, beta test, programming the firmware, housing\\

===== Resources =====
its based on a mixture off:
  * [[http://wiki.midibox.org/doku.php?id=msq-cc-lre|msq-cc-lre]]
  * [[http://wiki.midibox.org/doku.php?id=msq-cc-bcr|msq-cc-bcr]]
but its a complete new design, and firmware

====== Community users working on it ======
  * **[[Phatline]]** =  Programming, Documentation...\\

Just let a Private message on the forum to user already involved.\\
I have 10 ProtoBoards here - i test one, and if it works, i can share them for Beta Testing-if you pay the postage\\
MIDIbox

User Tools

Site Tools

Page Tools
