This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
cv1 [2020/12/31 01:22] phatline [Set] |
cv1 [2021/03/10 13:34] (current) phatline |
||
---|---|---|---|
Line 3: | Line 3: | ||
Control Voltage Recorder, Looper, and Generator - for a own Eurorack-Line... more in Future!\\ | Control Voltage Recorder, Looper, and Generator - for a own Eurorack-Line... more in Future!\\ | ||
{{:phatline:CV1-Case-Proto0.jpeg?500|}}\\ | {{:phatline:CV1-Case-Proto0.jpeg?500|}}\\ | ||
- | --this picture is the first prototype - pre-Eurorack :-D | + | --this picture is the first prototype - pre-Eurorack :-D\\ |
+ | [[https://youtu.be/pwgeu4ws50o|very-early-version...k]]\\ | ||
===== Features ===== | ===== Features ===== | ||
* A Envelope which can be Recored from an AIN-Source, it can be Editet on Startpoint,ATK-Playbackrate, Decay-Playbackrate\\ | * A Envelope which can be Recored from an AIN-Source, it can be Editet on Startpoint,ATK-Playbackrate, Decay-Playbackrate\\ | ||
Line 11: | Line 13: | ||
* Copy, Paste, Clear: to Transfair the CV Sequence to other CV1 Instances\\ | * Copy, Paste, Clear: to Transfair the CV Sequence to other CV1 Instances\\ | ||
* ProgramChange Load and Store on microSD-Card, Load and Store are CC-Commands, so you can remote the device\\ | * ProgramChange Load and Store on microSD-Card, Load and Store are CC-Commands, so you can remote the device\\ | ||
- | * The Sequencer can be set to Tact Systems: 3/4 4/4 5/4 7/4 9/4 11/4 13/4 | + | * The Sequencer can be set to Tact Systems: 3/4 4/4 5/4 7/4 9/4 11/4 13/4\\ |
+ | |||
+ | {{:phatline:CV1-Proto-Front.jpg?700|}}\\ | ||
+ | --First Prototyp with a fiew modifications\\ | ||
+ | |||
====== Hardware Requirements ====== | ====== Hardware Requirements ====== | ||
Line 31: | Line 38: | ||
* @JMidi1: connect your Sequencer to get Midiclock and Programchanges\\ | * @JMidi1: connect your Sequencer to get Midiclock and Programchanges\\ | ||
* @JAIN1: 2 CV Inputs - 12V tollerant\\ | * @JAIN1: 2 CV Inputs - 12V tollerant\\ | ||
- | * @JAUT3: 1 CV Outputs - (internal DAC with Protection Cirtuit > 12V Tollerant)\\ | + | * @JAUT3: 1 CV Output - (internal DAC with Protection Cirtuit > 12V Tollerant)\\ |
* @J19:Get up to 8 CV-Outputs, with a [[http://wiki.midibox.org/doku.php?id=aout_ng|AoutNG]]\\ | * @J19:Get up to 8 CV-Outputs, with a [[http://wiki.midibox.org/doku.php?id=aout_ng|AoutNG]]\\ | ||
- | * @JLCD1: up to 4 Additional OLED-Displays (decidet Reset Lines - so no additonal Circuit needet\\ | + | * @JLCD1: up to 4 Additional OLED-Displays for every one a Reset Line - so no additonal Circuit needet\\ |
* @J89: DIN and DOUT Shiftregister Chain: thought for decidet Expander Modules (which will come in near future\\ | * @J89: DIN and DOUT Shiftregister Chain: thought for decidet Expander Modules (which will come in near future\\ | ||
* @J2/Bootload: If the core is not starting up - because of bad-Firmware, then bridge this Jumper to come into the Bootload-Mode\\ | * @J2/Bootload: If the core is not starting up - because of bad-Firmware, then bridge this Jumper to come into the Bootload-Mode\\ | ||
Line 40: | Line 47: | ||
===== Firmware ===== | ===== Firmware ===== | ||
- | FIXME Firmware not made yet | + | yes it loopin... but not good enough to release anything... |
====== Building ====== | ====== Building ====== | ||
+ | The Design is optimized for Pick and Place most SMD Parts are on the Top-PCB\\ | ||
+ | i ordered 5 PCBs from JLCPCP with almost all SMD Parts (except 10pF µSD and 4x100nF) presoldered\\ | ||
+ | now waiting for Presoldered PCBs LOL - for 15€ a Piece!\\ | ||
{{:phatline:CV1-PCB-3D-Front.png?500|}}\\ | {{:phatline:CV1-PCB-3D-Front.png?500|}}\\ | ||
{{:phatline:CV1-PCB-3D-Back.png?500|}}\\ | {{:phatline:CV1-PCB-3D-Back.png?500|}}\\ | ||
+ | The Resistors for the LEDs are under the top LCD, so test your LED brightnes before soldering the Top-LCD\\ | ||
+ | You can remove LCD later but, it is hard! and you may damage the LCD or the PCB...\\ | ||
==== Frontpanel ==== | ==== Frontpanel ==== | ||
Line 53: | Line 64: | ||
- | ===== BOM ===== | + | ===== BOM ===== |
- | FIXME - this is not the right boom - it is a placeholder for the MOMENT! | + | FIXME the 22R Resistors should be 220, the Green LEDs are still to bright even with 440 Ohm Resistors...\\ |
- | ^Ref ^Qty ^Value ^Footprint ^MouserPart ^Link | + | ^Value^Designator^Footprint^LCSC Part Number^Library-Type^Mouser^ |
- | |C1 – C7 |7 |100nF |0603 Capacitor |81-GRM33C71C104ME14D |[[https://www.mouser.at/ProductDetail/Murata-Electronics/GRM033C71C104ME14D?qs=sGAEpiMZZMs0AnBnWHyRQC2E6Mcmylam1hDr6SmNpQA61PNjrYjJhw%3d%3d|Mouser]] |end | + | |100nF|C110|1206|C24497|basic| |
- | |Rec--1 – Rec—4, UI--5 UI—4, led1, -1 -2 -3 -4 |11 |REC, LED, beat, CC-IN, |0603 LED |630-ASMT-RR45-AQ902 |[[https://www.mouser.at/ProductDetail/Broadcom-Avago/ASMT-RR45-AQ902?qs=sGAEpiMZZMseGfSY3csMkdPLvDBdRu8er4Ntaxf%252bO0Q%3d|Mouser]] |end | + | |10uF|C1116,C2325|1206|C13585|basic|| |
- | |1-16 (LED-BAR) |64 |bar |0603 LED |755-SMLEN3WBC8W1 |[[https://www.mouser.at/ProductDetail/ROHM-Semiconductor/SMLEN3WBC8W1?qs=sGAEpiMZZMseGfSY3csMkdgyOOAg6kv2ux0eqzFsX0CYFpgTajV5iA%3d%3d|Mouser]] |end | + | |10pF|C17,C18,C19,C20,C21,C22|1206|not avaiable| |
- | |D64 D65 |2 |1N-4148 |1206 Diode |833-1N4148W-TP |[[https://www.mouser.at/ProductDetail/Micro-Commercial-Components-MCC/1N4148W-TP?qs=sGAEpiMZZMtoHjESLttvkgpLF%252bwYSnVUwcBJAIiGaSw%3d|Mouser]] |end | + | |1N4148W|D1,D2,D3,D4,D5,D64|SOD123|C81598|basic|| |
- | |PTC1 |1 |Thermistor_PTC |1206 Resistor |576-1206L150THWR |[[https://www.mouser.at/ProductDetail/Littelfuse/1206L150THWR?qs=%2fha2pyFaduhlexFGoLte04X2tL%252bbW3Ma%252b9epP3LU68QBDZh6rRT18Q%3d%3d|Mouser]] |end | + | |ENC|ENC1-ENC5|ENC-PEC11R|||652-PEC11R-4015F-S24| |
- | |R1, R2, R19 – R34 |18 |10K |1206 Resistor |603-AC0603FR-0710KL |[[https://www.mouser.at/ProductDetail/Yageo/AC0603FR-0710KL?qs=sGAEpiMZZMtlubZbdhIBIOG3KwTtqrl%2fm2zcUhmU2Sg%3d|Mouser]] |end | + | |5x2-AOUT|J19|Header-2x5| |
- | |R3 R5 R6 R7 R8 |5 |47 |1206 Resistor |603-RC0603FR-0747RL |[[https://www.mouser.at/ProductDetail/Yageo/RC0603FR-0747RL?qs=sGAEpiMZZMtlubZbdhIBIItYu4jZFrq8L5DEb7osJzY%3d|Mouser]] |end | + | |BootLoad|J2|Header-1x2| |
- | |R9-R14, R36, R37 |8 |220 |1206 Resistor |603-RC0603FR-07220RL |[[https://www.mouser.at/ProductDetail/Yageo/RC0603FR-07220RL?qs=sGAEpiMZZMtlubZbdhIBIPpBVm91En7nA%2f1f2dcQDck%3d|Mouser]] |end | + | |DinDout|J89|Header-2x5| |
- | |R15 R16 |2 |1K |1206 Resistor |603-RC0603JR-071KL |[[https://www.mouser.at/ProductDetail/Yageo/RC0603JR-071KL?qs=sGAEpiMZZMtlubZbdhIBIAVdtiC5pVGKZfRlvR01bds%3d|Mouser]] |end | + | |HEADER_3|JAIN1|Header-1x3| |
- | |R17 R18 |2 |4K7 |1206 Resistor |603-RC0603FR-074K7L |[[https://www.mouser.at/ProductDetail/Yageo/RC0603FR-074K7L?qs=sGAEpiMZZMtlubZbdhIBIItYu4jZFrq8L%2f7dpOVyqQA%3d|Mouser]] |end | + | |Header-1x4|JAIN2|Header-1x4-female| |
- | |OUT1 |1 |Midi |DIN-8-SDF-80J |490-SDF-80J |[[https://www.mouser.at/ProductDetail/CUI/SDF-80J?qs=%2fha2pyFaduhSnV%252bWd1R6r7bGdUcvMTnY0cpLjk72NmbDw9NYb3x3SQ%3d%3d|Mouser]] |end | + | |Header-1x4|JAIN3|Header-1x4| |
- | |M1 |1 |DIPCORE32_CMPNT_48P|517-929870-01-20-RA |DIP-40 |[[https://www.mouser.at/ProductDetail/517-929870-01-20-RA|Mouser]] |end | + | |CV1|JAUT1,JAUT2|Header-1x2| |
- | |S8 |1 |Shift |DT6 |611-D6R00F1LFS |[[https://www.mouser.at/ProductDetail/CK/D6R00F1LFS?qs=sGAEpiMZZMvxtGF7dlGNpmmAS%252bR8oK0rL60DZ%2fOhaRU%3d|Mouser]] |end | + | |CV-OUT1|JAUT3|Header-1x2| |
- | |S1 – S4 |1 |Part1 |611-SERWHAUOA |DTL2-1-LED |[[https://www.mouser.at/ProductDetail/?qs=Tr3lMbyRyKmNY3meBb4M6Q%3d%3d|Mouser]] |end | + | |BiOff|JG1|Header-1x2| |
- | |S5 – S7, S9 – S10 |6 |X,C,V,Len,Pre,Tac |611-SERRDAUOA |DTL2-1-NO-LED |[[https://www.mouser.at/ProductDetail/?qs=xWNScUPc28qopt8OzNAdDQ%3d%3d|Mouser]] |end | + | |Gain|JG2,JG3|Header-1x2| |
- | |ENC1 |1 |ENC_BOURNS_PEC11 |ENC_BOURNS_PEC11+SW |652-PEC11R-4215F-S24 |[[https://www.mouser.at/ProductDetail/Bourns/PEC11R-4215F-S0024?qs=sGAEpiMZZMsWp46O%252bq11WUFm4YUtE9euwxV%252b4orks98%3d|Mouser]] |end | + | |Disconnect|JG4|Header-1x2| |
- | |IN1 IN2 |2 |Midi |Midi-Socket-MAB5SH-DIN-5|566-MAB5SH |[[https://www.mouser.at/ProductDetail/Lumberg-Automation-Hirschmann/MAB-5-SH?qs=%2fha2pyFadugsfwapFJjt9E5ipSyTnvvOqCTvH0Md5SI%3d|Mouser]] |end | + | |Offset|JG5|Header-1x2| |
- | |Foot1 |1 |Pin |PINHEAD-1x02_2.54mm | + | |Foot|JG6|Header-1x2| |
- | |J2 |1 |BootLoad |PINHEAD-1x02_2.54mm | + | |Gates|JGate1|Header-2x3| |
- | |AIN1 |1 |PIN |PINHEAD-2x03_2.54mm | + | |OLED3-6|JLCD1|Header-2x7| |
- | |U1 U2 |2 |6N136 |SMDIP-8_W11.48mm |782-6N136-X009 |[[https://www.mouser.at/ProductDetail/Vishay-Semiconductors/6N136-X009?qs=sGAEpiMZZMtIHXa%252bTo%2fr2UM1h%2fJ6CDzN|Mouser]] |end | + | |Midi|JMidi1|Header-2x3| |
- | |-595 |3 |74HC595 |SO-16-N |621-74AHC595S16-13 |[[https://www.mouser.at/ProductDetail/Diodes-Incorporated/74AHC595S16-13?qs=sGAEpiMZZMtsbn1GaJysl7ow%2f10aQYa5fq0nEPxtQ7g%3d|Mouser]] |end | + | |Header-2x8-eurorack|Jpsu1|Header-2x8| |
- | |U3 U4 |2 |74LS165 |SO-16-N |595-SN74LS165ADR |[[https://www.mouser.at/ProductDetail/Texas-Instruments/SN74LS165ADR?qs=sGAEpiMZZMtsbn1GaJysl8drSYt3ukOhomiqNWJr5rc%3d|Mouser]] |end | + | |DIPCOREF4_52P|M1|dipCoreF4_v2c-52p-DIP-40MPNT_CORE_52P|||Antichambre| |
- | |M2 |1 |µSD_DM3ATDM3AT |ΜSD_DM3AT |798-DM3AT-SF-PEJM5 |[[https://www.mouser.at/ProductDetail/798-DM3AT-SF-PEJM5|Mouser]] |end | + | |uSD_DM3ATDM3AT|M2|uSD-DM3AT-SF-PEJM5|||798-DM3AT-SF-PEJM5| |
+ | |6N138|M3|DIP-8|||512-6N138M| | ||
+ | |LED-Green|Menue-1,TR1,Clock-1,ENV-1,Menue-2,TR2,ENV-2,Menue-3,Menue-4,Menue-5,Menue-6|1206-LED|C559120|extended| | ||
+ | |OLED|OLED1,OLED2|SSD1306:OLED-SSD1306-128x64| | ||
+ | |PTC|PTC1|1206|C126818|extended| | ||
+ | |10K|R28,R29,R43-R58|1206|C17902|basic| | ||
+ | |49K9|R30-R40,R61-R64|1206|C18017|extended| | ||
+ | |30K|R41,R42|1206|C17999|extended| | ||
+ | |130K|R59|1206|C17893|extended| | ||
+ | |100K|R60|1206|C17900|basic| | ||
+ | |1K|R1-R7|1206|C4410|basic| | ||
+ | |4K7|R8|1206|C17936|basic| | ||
+ | |220|R9-R27,R63|1206|C17958|basic| | ||
+ | |Trim-3224W-1-104E|RV1,RV2|Trimmer-3224W-1|C53229|extended| | ||
+ | |Trim-3214W-1-253E|RV3|Trimmer-3214W_Vertical|||652-3214W-1-253E| | ||
+ | |74HC595|S1-S3|SOP-16_SOIC-16|C5947|basic| | ||
+ | |74HC165|S4,S5|SOP-16_SOIC-16| C5613|basic| | ||
+ | |TL072|U2,U3|SOP-8_SOIC-8|C6961|basic| | ||
+ | |MCP6002|U6|SOP-8_SOIC-8|C7377|basic| | ||
+ | |||
+ | ===== Shematic ===== | ||
+ | {{:phatline:cv1-shematic.png?800|}}\\ | ||
===== To Do ===== | ===== To Do ===== | ||
Line 87: | Line 119: | ||
====== Community users working on it ====== | ====== Community users working on it ====== | ||
- | * **[[Phatline]]** = Programming, Documentation...\\ | + | * **[[Phatline]]** = Prototype, Shematic, PCB, Programming, Documentation, all...\\ |
Just let a Private message on the forum to user already involved.\\ | Just let a Private message on the forum to user already involved.\\ | ||
- | I have 10 ProtoBoards here - i test one, and if it works, i can share them for Beta Testing-if you pay the postage\\ | + | I have ProtoBoards here - i test one, and if it works, i can share them for Beta Testing-if you pay the postage\\ |