User Tools

Site Tools


cv1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
cv1 [2020/12/31 01:22]
phatline [Set]
cv1 [2021/03/10 13:34] (current)
phatline
Line 3: Line 3:
 Control Voltage Recorder, Looper, and Generator - for a own Eurorack-Line... more in Future!\\ Control Voltage Recorder, Looper, and Generator - for a own Eurorack-Line... more in Future!\\
 {{:​phatline:​CV1-Case-Proto0.jpeg?​500|}}\\ {{:​phatline:​CV1-Case-Proto0.jpeg?​500|}}\\
---this picture is the first prototype - pre-Eurorack :-D+--this picture is the first prototype - pre-Eurorack :-D\\ 
 +[[https://​youtu.be/​pwgeu4ws50o|very-early-version...k]]\\ 
 ===== Features ===== ===== Features =====
  * A Envelope which can be Recored from an AIN-Source, it can be Editet on Startpoint,​ATK-Playbackrate,​ Decay-Playbackrate\\  * A Envelope which can be Recored from an AIN-Source, it can be Editet on Startpoint,​ATK-Playbackrate,​ Decay-Playbackrate\\
Line 11: Line 13:
  * Copy, Paste, Clear: to Transfair the CV Sequence to other CV1 Instances\\  * Copy, Paste, Clear: to Transfair the CV Sequence to other CV1 Instances\\
  * ProgramChange Load and Store on microSD-Card,​ Load and Store are CC-Commands,​ so you can remote the device\\  * ProgramChange Load and Store on microSD-Card,​ Load and Store are CC-Commands,​ so you can remote the device\\
- * The Sequencer can be set to Tact Systems: 3/4 4/4 5/4 7/4 9/4 11/4 13/4 + * The Sequencer can be set to Tact Systems: 3/4 4/4 5/4 7/4 9/4 11/4 13/4\\ 
 + 
 +{{:​phatline:​CV1-Proto-Front.jpg?​700|}}\\ 
 +--First Prototyp with a fiew modifications\\ 
 + 
  
 ====== Hardware Requirements ====== ====== Hardware Requirements ======
Line 33: Line 40:
   * @JAUT3: 1 CV Output - (internal DAC with Protection Cirtuit > 12V Tollerant)\\   * @JAUT3: 1 CV Output - (internal DAC with Protection Cirtuit > 12V Tollerant)\\
   * @J19:Get up to 8 CV-Outputs, with a [[http://​wiki.midibox.org/​doku.php?​id=aout_ng|AoutNG]]\\   * @J19:Get up to 8 CV-Outputs, with a [[http://​wiki.midibox.org/​doku.php?​id=aout_ng|AoutNG]]\\
-  * @JLCD1: up to 4 Additional OLED-Displays ​(decidet ​Reset Lines - so no additonal Circuit needet\\+  * @JLCD1: up to 4 Additional OLED-Displays ​for every one a Reset Line - so no additonal Circuit needet\\
   * @J89: DIN and DOUT Shiftregister Chain: thought for decidet Expander Modules (which will come in near future\\   * @J89: DIN and DOUT Shiftregister Chain: thought for decidet Expander Modules (which will come in near future\\
   * @J2/​Bootload:​ If the core is not starting up - because of bad-Firmware,​ then bridge this Jumper to come into the Bootload-Mode\\   * @J2/​Bootload:​ If the core is not starting up - because of bad-Firmware,​ then bridge this Jumper to come into the Bootload-Mode\\
Line 40: Line 47:
  
 ===== Firmware ===== ===== Firmware =====
-FIXME Firmware ​not made yet+yes it loopin... but not good enough to release anything...
  
 ====== Building ====== ====== Building ======
 +The Design is optimized for Pick and Place most SMD Parts are on the Top-PCB\\
 +i ordered 5 PCBs from JLCPCP with almost all SMD Parts (except 10pF µSD and 4x100nF) presoldered\\
 +now waiting for Presoldered PCBs LOL - for 15€ a Piece!\\
 {{:​phatline:​CV1-PCB-3D-Front.png?​500|}}\\ {{:​phatline:​CV1-PCB-3D-Front.png?​500|}}\\
 {{:​phatline:​CV1-PCB-3D-Back.png?​500|}}\\ {{:​phatline:​CV1-PCB-3D-Back.png?​500|}}\\
 +The Resistors for the LEDs are under the top LCD, so test your LED brightnes before soldering the Top-LCD\\ 
 +You can remove ​ LCD later but, it is hard! and you may damage the LCD or the PCB...\\
  
 ==== Frontpanel ==== ==== Frontpanel ====
Line 53: Line 64:
  
  
-===== BOM =====  +===== BOM ===== 
-FIXME - this is not the right boom - it is a placeholder for the MOMENT! +FIXME the 22R Resistors should be 220, the Green LEDs are still to bright even with 440 Ohm Resistors...\\ 
-^Ref ^Qty ^Value ^Footprint ^MouserPart ^Link +^Value^Designator^Footprint^LCSC Part Number^Library-Type^Mouser
-|C1 – C7 |7 |100nF |0603 Capacitor |81-GRM33C71C104ME14D |[[https://​www.mouser.at/​ProductDetail/​Murata-Electronics/​GRM033C71C104ME14D?​qs=sGAEpiMZZMs0AnBnWHyRQC2E6Mcmylam1hDr6SmNpQA61PNjrYjJhw%3d%3d|Mouser]] |end +|100nF|C110|1206|C24497|basic| 
-|Rec--1 – Rec—4UI--5 UI—4led1-1 -2 -3 -4 |11 |RECLEDbeatCC-IN, |0603 LED |630-ASMT-RR45-AQ902 ​|[[https://​www.mouser.at/​ProductDetail/​Broadcom-Avago/ASMT-RR45-AQ902?​qs=sGAEpiMZZMseGfSY3csMkdPLvDBdRu8er4Ntaxf%252bO0Q%3d|Mouser]] |end +|10uF|C1116,​C2325|1206|C13585|basic|| 
-|1-16 (LED-BAR) |64 |bar |0603 LED |755-SMLEN3WBC8W1 |[[https://​www.mouser.at/​ProductDetail/​ROHM-Semiconductor/​SMLEN3WBC8W1?​qs=sGAEpiMZZMseGfSY3csMkdgyOOAg6kv2ux0eqzFsX0CYFpgTajV5iA%3d%3d|Mouser]] |end +|10pF|C17,C18,C19,C20,C21,C22|1206|not avaiable| 
-|D64 D65 |2 |1N-4148 |1206 Diode |833-1N4148W-TP |[[https://​www.mouser.at/​ProductDetail/​Micro-Commercial-Components-MCC/1N4148W-TP?​qs=sGAEpiMZZMtoHjESLttvkgpLF%252bwYSnVUwcBJAIiGaSw%3d|Mouser]] |end +|1N4148W|D1,D2,D3,D4,D5,D64|SOD123|C81598|basic|| 
-|PTC1 |1 |Thermistor_PTC |1206 Resistor |576-1206L150THWR |[[https://​www.mouser.at/​ProductDetail/​Littelfuse/​1206L150THWR?​qs=%2fha2pyFaduhlexFGoLte04X2tL%252bbW3Ma%252b9epP3LU68QBDZh6rRT18Q%3d%3d|Mouser]] |end +|ENC|ENC1-ENC5|ENC-PEC11R|||652-PEC11R-4015F-S24
-|R1, R2, R19 – R34 |18 |10K |1206 Resistor |603-AC0603FR-0710KL |[[https://​www.mouser.at/​ProductDetail/​Yageo/​AC0603FR-0710KL?​qs=sGAEpiMZZMtlubZbdhIBIOG3KwTtqrl%2fm2zcUhmU2Sg%3d|Mouser]] |end +|5x2-AOUT|J19|Header-2x5| 
-|R3 R5 R6 R7 R8 |5 |47 |1206 Resistor |603-RC0603FR-0747RL |[[https://​www.mouser.at/​ProductDetail/​Yageo/​RC0603FR-0747RL?​qs=sGAEpiMZZMtlubZbdhIBIItYu4jZFrq8L5DEb7osJzY%3d|Mouser]] |end +|BootLoad|J2|Header-1x2| 
-|R9-R14, R36, R37 |8 |220 |1206 Resistor |603-RC0603FR-07220RL |[[https://​www.mouser.at/​ProductDetail/​Yageo/​RC0603FR-07220RL?​qs=sGAEpiMZZMtlubZbdhIBIPpBVm91En7nA%2f1f2dcQDck%3d|Mouser]] |end +|DinDout|J89|Header-2x5
-|R15 R16 |2 |1K |1206 Resistor |603-RC0603JR-071KL  |[[https://​www.mouser.at/​ProductDetail/​Yageo/​RC0603JR-071KL?​qs=sGAEpiMZZMtlubZbdhIBIAVdtiC5pVGKZfRlvR01bds%3d|Mouser]] |end +|HEADER_3|JAIN1|Header-1x3| 
-|R17 R18 |2 |4K7 |1206 Resistor |603-RC0603FR-074K7L |[[https://​www.mouser.at/​ProductDetail/​Yageo/​RC0603FR-074K7L?​qs=sGAEpiMZZMtlubZbdhIBIItYu4jZFrq8L%2f7dpOVyqQA%3d|Mouser]] |end +|Header-1x4|JAIN2|Header-1x4-female| 
-|OUT1 |1 |Midi |DIN-8-SDF-80J |490-SDF-80J |[[https://​www.mouser.at/​ProductDetail/​CUI/​SDF-80J?​qs=%2fha2pyFaduhSnV%252bWd1R6r7bGdUcvMTnY0cpLjk72NmbDw9NYb3x3SQ%3d%3d|Mouser]] |end +|Header-1x4|JAIN3|Header-1x4
-|M1 |1 |DIPCORE32_CMPNT_48P|517-929870-01-20-RA |DIP-40 |[[https://​www.mouser.at/​ProductDetail/​517-929870-01-20-RA|Mouser]] |end +|CV1|JAUT1,JAUT2|Header-1x2| 
-|S8 |1 |Shift |DT6 |611-D6R00F1LFS |[[https://​www.mouser.at/​ProductDetail/​CK/​D6R00F1LFS?​qs=sGAEpiMZZMvxtGF7dlGNpmmAS%252bR8oK0rL60DZ%2fOhaRU%3d|Mouser]] |end +|CV-OUT1|JAUT3|Header-1x2
-|S1 – S4 |1 |Part1 |611-SERWHAUOA |DTL2-1-LED |[[https://​www.mouser.at/​ProductDetail/?​qs=Tr3lMbyRyKmNY3meBb4M6Q%3d%3d|Mouser]] |end +|BiOff|JG1|Header-1x2| 
-|S5 – S7, S9 – S10 |6 |X,C,​V,​Len,​Pre,​Tac |611-SERRDAUOA |DTL2-1-NO-LED |[[https://​www.mouser.at/​ProductDetail/?​qs=xWNScUPc28qopt8OzNAdDQ%3d%3d|Mouser]] |end +|Gain|JG2,​JG3|Header-1x2
-|ENC1 |1 |ENC_BOURNS_PEC11 |ENC_BOURNS_PEC11+SW |652-PEC11R-4215F-S24 |[[https://​www.mouser.at/​ProductDetail/​Bourns/​PEC11R-4215F-S0024?​qs=sGAEpiMZZMsWp46O%252bq11WUFm4YUtE9euwxV%252b4orks98%3d|Mouser]] |end +|Disconnect|JG4|Header-1x2| 
-|IN1 IN2 |2 |Midi |Midi-Socket-MAB5SH-DIN-5|566-MAB5SH |[[https://​www.mouser.at/​ProductDetail/​Lumberg-Automation-Hirschmann/​MAB-5-SH?​qs=%2fha2pyFadugsfwapFJjt9E5ipSyTnvvOqCTvH0Md5SI%3d|Mouser]] |end +|Offset|JG5|Header-1x2
-|Foot1 |1 |Pin |PINHEAD-1x02_2.54mm  +|Foot|JG6|Header-1x2| 
-|J2 |1 |BootLoad |PINHEAD-1x02_2.54mm +|Gates|JGate1|Header-2x3| 
-|AIN1 |1 |PIN |PINHEAD-2x03_2.54mm +|OLED3-6|JLCD1|Header-2x7
-|U1 U2 |2 |6N136 |SMDIP-8_W11.48mm |782-6N136-X009 |[[https://​www.mouser.at/​ProductDetail/​Vishay-Semiconductors/​6N136-X009?​qs=sGAEpiMZZMtIHXa%252bTo%2fr2UM1h%2fJ6CDzN|Mouser]] |end +|Midi|JMidi1|Header-2x3| 
-|-595 |3 |74HC595 |SO-16-N |621-74AHC595S16-13 |[[https://​www.mouser.at/​ProductDetail/​Diodes-Incorporated/​74AHC595S16-13?​qs=sGAEpiMZZMtsbn1GaJysl7ow%2f10aQYa5fq0nEPxtQ7g%3d|Mouser]] |end +|Header-2x8-eurorack|Jpsu1|Header-2x8
-|U3 U4 |2 |74LS165 |SO-16-N |595-SN74LS165ADR |[[https://​www.mouser.at/​ProductDetail/​Texas-Instruments/​SN74LS165ADR?​qs=sGAEpiMZZMtsbn1GaJysl8drSYt3ukOhomiqNWJr5rc%3d|Mouser]] |end +|DIPCOREF4_52P|M1|dipCoreF4_v2c-52p-DIP-40MPNT_CORE_52P|||Antichambre| 
-|M2 |1 |µSD_DM3ATDM3AT |ΜSD_DM3AT |798-DM3AT-SF-PEJM5 |[[https://www.mouser.at/​ProductDetail/​798-DM3AT-SF-PEJM5|Mouser]] |end+|uSD_DM3ATDM3AT|M2|uSD-DM3AT-SF-PEJM5|||798-DM3AT-SF-PEJM5| 
 +|6N138|M3|DIP-8|||512-6N138M| 
 +|LED-Green|Menue-1,TR1,Clock-1,ENV-1,Menue-2,TR2,ENV-2,Menue-3,Menue-4,Menue-5,Menue-6|1206-LED|C559120|extended| 
 +|OLED|OLED1,OLED2|SSD1306:​OLED-SSD1306-128x64| 
 +|PTC|PTC1|1206|C126818|extended| 
 +|10K|R28,​R29,​R43-R58|1206|C17902|basic
 +|49K9|R30-R40,R61-R64|1206|C18017|extended
 +|30K|R41,R42|1206|C17999|extended| 
 +|130K|R59|1206|C17893|extended
 +|100K|R60|1206|C17900|basic| 
 +|1K|R1-R7|1206|C4410|basic
 +|4K7|R8|1206|C17936|basic| 
 +|220|R9-R27,R63|1206|C17958|basic| 
 +|Trim-3224W-1-104E|RV1,RV2|Trimmer-3224W-1|C53229|extended| 
 +|Trim-3214W-1-253E|RV3|Trimmer-3214W_Vertical|||652-3214W-1-253E| 
 +|74HC595|S1-S3|SOP-16_SOIC-16|C5947|basic| 
 +|74HC165|S4,​S5|SOP-16_SOIC-16C5613|basic
 +|TL072|U2,U3|SOP-8_SOIC-8|C6961|basic
 +|MCP6002|U6|SOP-8_SOIC-8|C7377|basic| 
 + 
 +===== Shematic ===== 
 +{{:phatline:​cv1-shematic.png?800|}}\\
  
 ===== To Do ===== ===== To Do =====
Line 87: Line 119:
  
 ====== Community users working on it ====== ====== Community users working on it ======
-  * **[[Phatline]]** =  Programming,​ Documentation...\\+  * **[[Phatline]]** =  ​Prototype, Shematic, PCB, Programming,​ Documentation, all...\\
  
 Just let a Private message on the forum to user already involved.\\ Just let a Private message on the forum to user already involved.\\
-I have 10 ProtoBoards here - i test one, and if it works, i can share them for Beta Testing-if you pay the postage\\+I have ProtoBoards here - i test one, and if it works, i can share them for Beta Testing-if you pay the postage\\
cv1.1609377736.txt.gz · Last modified: 2020/12/31 01:22 by phatline