Differences

This shows you the differences between two versions of the page.

--- dout_module_digital_output [2006/05/01 15:17]
moebius
+++ dout_module_digital_output [2008/11/23 16:29]
this
@@ Line 1: / Line 1: @@
- * [[http://www.ucapps.de/mbhp_dout.html|DOUT Module]] <sup>uCApps</sup>\\
+====== General Informations ======
- * [[DIN & DOUT Pintable]]
+A DOUT module is a digital output module, usually used to drive LEDs with a Midibox.
+  * [[http://www.ucapps.de/mbhp_dout.html|DOUT Module]] <sup>uCApps</sup>\\
+  * [[DIN & DOUT Pintable]]
+\\
+Note that hardware pin's will be counted D7 - D0 / O7 - O0 / QH - QA. In contrast, pins for DIN modules will be counted D0 - D7.\\
+Refer the DIN & DOUT Pintable to see the relation between software pin numbers and hardware pins.
+\\
+====== Connection to Core Module ======
+Check the version of your Boards; if you’re using SmashTV’s Core that’s equipped with double rows, you can build a split-cable to connect J8/J9 to a DIN and a DOUT:
+{{http://www.audiocommander.de/picBrowser/galleries/070707_ACSensorizer/CORE_DIN_DOUT_J8J9_Cable.png}}

MIDIbox