Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 149 Hits
- out of all the features of the sequencer, or what each of the options on every menu page does, but it do... Def.
Only the MIDI channel setting is different, each track having its own MIDI channel (1-16) on which... d in this guide (it is likely you'll have four of each). These will be called MIDI IN1 and MIDI OUT1, or... ernates between length and roll parameter layers. Each of the default session's tracks has four paramete
- protodeck: 48 Hits
- smashTV) is the 2x5 pins standard connectors! For each thing, it is the same connector and it is very ea... \
The **track control** is used for controlling each 8 tracks. 2 pots for send amount, 3 pots for inst... cks. 2 pots for sound tweaking, 1 button for mute each drum part.\\
{{protodeck:drumcontrol.jpg}}\\
... over a shared medium (taken from wikipedia).\\
Each AIN can read 32 values and only uses 4 channel. S
- pedal_box:manual: 21 Hits
- a device files which are uploaded to a bankstick. Each device file requires a 24LC256 bankstick. \\
A m... st of CC numbers and Program Change numbers. \\
Each entry contains: \\
* The name of the event \\ ... Entries contain (there are 32 of these entries in each patch map)
* Enabled or Disabled for that ent... * Finally the Relay Settings
* Relays 1 - 8 each have an enabled or disabled setting. If disabled
- midibox_tia: 18 Hits
- dulation Wheel.
* After-Touch.
* Volume for each Voice.
* Waveform select for each Voice.
* Transpose for each Voice.
* Pitch Range & Pitch Bend for each Voice.
* Delay for each Voice.
* Portamento for eac
- mbqg_fp: 15 Hits
- f MIDIbox Quad Genesis, you will need (details on each part below):
* An aluminum front panel **OR** ... The dual-gang and single-gang potentiometers (one each per synth, not per module!) for the Genesis modul... or buttons. Please plan out carefully how many of each type of LED you will need based on your color pre... ctually any through-hole small signal diode), and each one has a cathode marking, so there should never
- mb-lre8x2cs_pcb_bulk_order: 14 Hits
- hipping insurance you want to take.
The price of each board is 9€ (I had to buy extra shipping material... >14€</del> <del>11€</del> <del>9€</del> **8,50€** each PCB (+ shipping) - This price can be slightly les... ): just less than 2U standard.\\
The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm... | |rvlt|
====Components====
==LEDs & LEDring==
Each LEDring is composed of 16 LEDs.\\
You can use 3m
- mb808: 13 Hits
- l be kept in software
* 8 banks with 8 patterns each
* Each pattern will have A and B variations that can be switched between or morphed between with dedi... eration of the sequencer. Although this prevents each step from having it's own flam value, what we gai... but in a way that mimics the original 808, where each pattern had A and B variations that could be chai
- home:project:mb808: 13 Hits
- l be kept in software
* 8 banks with 8 patterns each
* Each pattern will have A and B variations that can be switched between or morphed between with dedi... eration of the sequencer. Although this prevents each step from having it's own flam value, what we gai... but in a way that mimics the original 808, where each pattern had A and B variations that could be chai
- mbhp_genesis: 13 Hits
- ides all the hardware necessary to support one of each YM2612/YM3438 (OPN2) and SN76489/94/96 (PSG) soun... our MBHP_Genesis modules may be stacked on top of each other to run up to four sets of sound chips, with... ted, with protection
* Separate oscillators for each sound chip; supports 8-DIP or 5x7mm SMT packages
... This connector allows you to specify which board each board is, by selecting which pair of /CS lines fr
- wilba_mb_6582_base_pcb_construction_guide: 12 Hits
- ering skills. You do not need to know exactly how each and every part works, but you must know the very ... for 6581 SIDs. Instead of a voltage regulator on each SID module, there are just two (one 9v and one 12... PCB).
* Capacitors that go inside an IC socket (each SID has one, each PIC has one). These should be mounted flat, put a 90 degree bend in the leads before
- pedal_box: 10 Hits
- iggered and of course up to 8 expression pedals.
Each button or pedal can be assigned to a specific dev... ned min and max values (can also be different for each program change)
* A MIDI CC can be configured... 7 devices (1 bankstick required per device)
* Each pedal or button has it's own device assignment
... me and associated value
* Up to 128 entries each (1 for each value, does not need all entries)
US
- mcan: 10 Hits
- an access space behind to rewire the machines for each session. It is boring having to do it every time,... s_2_wire.png?600 |}}
For both connection models, each Node(Device) connected to the buss can transmit or receive data. How is this possible? \\
In each controller there's a mechanism (it's hardware), w... r SPI but **packets** or frames like Ethernet. \\
Each packet has:
* A Start Of Frame bit.
* An iden
- wilba_mb_6582_control_surface_construction_guide: 9 Hits
- igned in the panel holes.
Solder **ONE** lead of each LED... I solder the shorter lead first, so that t... s to 1mm above PCB, and solder the second lead of each LED, and also do a proper solder joint on the fir... W is the time to solder wires between the LEDs on each rotary encoder.
Test LEDs now if you wish... mak... flat" and the other side is "ribbed" (you can see each separate wire covering).
The ideal length to use
- midibox_audiomatrix: 9 Hits
- itself using a display would also be sufficient. Each output should just have individual settings for w... s just a case of having balancing transformers on each in and out, and using a switching plug - ie a 6.5... ------#--------#--------#---------- 17-32
</code>
Each set of 8 inputs is split in two and goes to two chips in parallel, so that each set of 8 inputs is capable of being routed to any
- mb-lre8x2cs_rev4.6: 9 Hits
- mididocs:seq:usingblm: 9 Hits
- pga:choices: 8 Hits
- aout_ng: 8 Hits
- flo: 7 Hits
- wilba_mb_6582: 7 Hits
- midibox_pokey: 7 Hits
- electronics_basics: 7 Hits
- pga:buildchanbrd: 7 Hits
- introduction_to_midi: 6 Hits
- control_surface_troubleshooting: 6 Hits
- how_to_organize_a_bulk_order: 6 Hits
- wilba_mb_6582_parts_list: 6 Hits
- pga:buildregbrd: 6 Hits
- midibox_sid_faq: 6 Hits
- acsensorizer_04: 6 Hits
- dseq_bs: 5 Hits
- wiki:test_page: 5 Hits
- msq-cc-lre-v2: 5 Hits
- mb-lre8x2cs_pcb: 5 Hits
- home:mbhp:module:din: 5 Hits
- 16th_fixed_polysequencer: 5 Hits
- midibox_quad_genesis: 5 Hits
- pga:postconfigsoftware: 5 Hits
- din_module: 5 Hits
- trsequencer: 5 Hits
- triggermatrix: 5 Hits
- home:mbhp:module:aout_ng: 5 Hits
- home:project:midibox_sid:v1_manual: 4 Hits
- home:project:midibox_sid_v1_manual: 4 Hits
- triggermatrix4: 4 Hits
- sammichfm: 4 Hits
- midibox_sid_v1_manual: 4 Hits
- midibox_master_keys: 4 Hits
- chaos_matrix: 4 Hits
- dseq32: 4 Hits
- pga:softwareoverview: 4 Hits
- home:mbhp:module:lcd: 4 Hits
- wickedblade: 4 Hits
- midibox_sd_card_sample_player: 4 Hits
- m16: 4 Hits
- dictionary:binary: 4 Hits
- msq-cc-bcr: 4 Hits
- lcd: 4 Hits
- easy_cv: 4 Hits
- arkade: 3 Hits
- msq-cc-lre: 3 Hits
- korg_wavedrum_midification: 3 Hits
- wilba_mb_6582_prototype: 3 Hits
- mb_olre16: 3 Hits
- 16x4blm_pcb: 3 Hits
- c_from_first_principles: 3 Hits
- howto:dev:autotools-skeleton: 3 Hits
- pedal_box:pc_editor_manual: 3 Hits
- lucem: 3 Hits
- changing_din_pins: 3 Hits
- pga:buildoutbrd: 3 Hits
- acsensorizer_02: 3 Hits
- pad_4_4: 3 Hits
- tpd_pcb: 3 Hits
- seq_v4l_mk._ii: 3 Hits
- user_contest2007: 3 Hits
- midibox_vgmplayer: 3 Hits
- stuartm_stukontrol: 3 Hits
- introduction_to_ucapps.de: 3 Hits
- mb_matrix: 3 Hits
- home:project:midi_mapper: 3 Hits
- mididocs:midibox_seq_v4: 2 Hits
- using_pic18f4620: 2 Hits
- cc-looper: 2 Hits
- midibox64_e_patchmode: 2 Hits
- dictionary:backplane: 2 Hits
- mididocs:index: 2 Hits
- pga:patches: 2 Hits
- windows_toolchain_core: 2 Hits
- waldorf_knobs_bulk_order_2013: 2 Hits
- wilba_mb_seq: 2 Hits
- windows_mios32_toolchain_core: 2 Hits
- pga:midichart: 2 Hits
- midibox_ay_3_8912_tune: 2 Hits
- usb_gm5_module: 2 Hits
- dictionary:ascii: 2 Hits
- layering_the_ui: 2 Hits
- charge: 2 Hits
- wild_weasel: 2 Hits
- dougwellington_marquardt_switch_bulk_order: 2 Hits
- midiboxfx_-_midifiying_analog_gear: 2 Hits
- tos_-_a_tds_controller_blog: 2 Hits
- seq_c64_keyboard_mod: 2 Hits
- enc_4_4: 2 Hits
- fadercore_-_vlr-8x16ledmeter: 2 Hits
- questionable: 2 Hits
- newbie: 2 Hits
- apparat_20_construction_blog: 2 Hits
- dictionary:boolean: 2 Hits
- wilba_albs_waldorf_knob_mega_sale: 2 Hits
- wilba_mb_seq_pcb_bulk_order: 2 Hits
- mios_c_simulator_-_debugger: 2 Hits
- mc_protocol_mappings: 2 Hits
- midibox_ay_3_8912: 2 Hits
- wilba_mb_6582_panels: 2 Hits
- parity: 2 Hits
- ic: 2 Hits
- frequently_asked_questions_faq: 2 Hits
- midiboxmixerhardware: 2 Hits
- pga:inputchoices: 2 Hits
- waldorf_knobs_bulk_order_fall_2013: 1 Hits
- mb_2069: 1 Hits
- mididocs:seq:blm16x16_build_guide: 1 Hits
- opl3_module_modified: 1 Hits
- midiboxmixer: 1 Hits
- mb-lre8x2cs_bulk_order_2014: 1 Hits
- eusart_bug: 1 Hits
- howto_create_a_pcb_english_german: 1 Hits
- default_encoder_assignments: 1 Hits
- stryd_one_word2doku: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- eeprom: 1 Hits
- fnp-sid: 1 Hits
- ultracore: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- mididocs:seq:building: 1 Hits
- coresound: 1 Hits
- midibox_3396: 1 Hits
- sync_4_newbies: 1 Hits
- wilba_mb_6582_parts_bulk_order: 1 Hits
- seqv4plus_le_mec: 1 Hits
- dictionary:base: 1 Hits
- midi_specification: 1 Hits
- midibox_snes_apu: 1 Hits
- jdm_with_winpic800: 1 Hits
- fadercore_-_vlr-8enc: 1 Hits
- midiboxmixermanual: 1 Hits
- dictionary:buffer: 1 Hits
- wilba_mb_seq_construction_guide: 1 Hits
- pga:smtsoldering: 1 Hits
- wcore_i2c: 1 Hits
- macos_mios32_toolchain_core: 1 Hits
- pga:stackboards: 1 Hits
- aout_4: 1 Hits
- albs_waldorf_knobs_2011_bulk_order: 1 Hits
- pga:preconfigsoftware: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- parallel: 1 Hits
- spld: 1 Hits
- series: 1 Hits
- rs-232: 1 Hits
- rf: 1 Hits
- pnp: 1 Hits
- pixel: 1 Hits
- octal: 1 Hits
- triac: 1 Hits
- object_oriented_programming_-_oop: 1 Hits
- npn: 1 Hits
- kernel: 1 Hits
- i_o: 1 Hits
- yagi: 1 Hits
- hex_or_hexadecimal: 1 Hits
- temp_template_test: 1 Hits
- unicode: 1 Hits
- frailn_ay-3-8912_mini_sale: 1 Hits
- midibox_ay_ym_v2: 1 Hits
- sammichsid: 1 Hits
- getting_started_faq: 1 Hits
- midimasterclock: 1 Hits
- simple_cv: 1 Hits
- troubleshooting: 1 Hits
- transistor: 1 Hits
- kicad: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- drumstuff: 1 Hits
- crystals_and_oscillators: 1 Hits
- aout_lc_module: 1 Hits
- ain_module: 1 Hits
- midibox_fm_21: 1 Hits
- howto:dev:libcan: 1 Hits
- mbhp_genesis_ls: 1 Hits
- half_duplex: 1 Hits
- dtmf: 1 Hits
- dictionary:bcd: 1 Hits
- audiocommander: 1 Hits
- home:skills:bad_solderings_gallery: 1 Hits
- pcb: 1 Hits
- home:software:windows:word2doku: 1 Hits
- peake: 1 Hits
- stryd_one_mbhp: 1 Hits
- home:skills:etching_pcbs: 1 Hits
- cpld: 1 Hits
- checksum: 1 Hits
- home:mbhp:parts: 1 Hits
- albs_waldorf_knob_bulk_order: 1 Hits
- waldorf_knobs_bulk_order_2012: 1 Hits
- john_e._finster: 1 Hits
- dictionary:assembler: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- dictionary:attenuation: 1 Hits
- albs_waldorf_knob_-_order_no._3: 1 Hits
- digital_signal: 1 Hits
- wilba_mb_6582_power_switch_bulk_order: 1 Hits
- delta_transformer: 1 Hits
- best_user_patches_librairy: 1 Hits
- dougwellington_mb6582_powersupply_bulk_order: 1 Hits
- gm5x5x5_pcb_bulk_order: 1 Hits
- waldorf_knobs_bulk_order_april_2013: 1 Hits
- compliant: 1 Hits
- dougwellington_alps_type_n_motorfader_bulk_order: 1 Hits
- i2c: 1 Hits
- scs_pcb: 1 Hits
- circuit: 1 Hits
- bad_solderings_gallery: 1 Hits
- howto:dev:installing-autotools-linux: 1 Hits
- changing_dout_pins: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- shortcut_trigger_for_enttec_light_factory: 1 Hits