User Tools

Site Tools


fadercore_-_fadermodule_for_audio_daw

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
fadercore_-_fadermodule_for_audio_daw [2014/05/31 15:38]
novski
fadercore_-_fadermodule_for_audio_daw [2014/10/05 16:54] (current)
novski
Line 1: Line 1:
-**Fadercore** is a Project to make a reproducible and scaleable Fadermodule that can be used for DAW proposals.+====== ​Fadercore ​======
  
-The goal of Fadercore is to make a Modul of 8 Faders with 1 Oled, 3 Buttons ​and one Encoder per Fader that are scaleable ​up to 32 Faders (4 Modules)+Fadercore is a Project ​to make a replicable ​and scaleable ​Fadermodule that can be used for DAW proposals.
  
-The Heart of a Fadercore is STM32F4Demo with a special Header ​for Display chains... +I started 2010 with that idea because i was Live Engineer ​of a concert Location. I used software DAW for mixing because it was the cheapest console on marketSince then Behringer mixed up the market totaly my purposes changesNow its just a fun Projekt to learn how to design an Electronic Product
  
-I started 2010 with that idea because i was Live Engineer ​of a Club in Switzerland. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly ​and my purposes changes. Now its just a fun Projekt to learn how hard it is to designing a Electronic Product. ​+The goal of Fadercore is to make Modul of 8 Faderstrips where every strip has 1 Oled, 3 Buttons and one Encoder ​and is scaleable up to 32 Faders (4 Modules)
  
-The follwoing steps are to do:+The Heart of a Fadercore is a STM32F4Demo or a LPC17Core with a special Header for Display chains... ​
  
-Make a Coreboard that has connections to 32 displays. - done+===== Frontpanel =====
  
-Make a Coreboard ​that has connections to 8 Encoders with LED rings. - done+{{:​fadercore_frontpanel.png?​200|}} 
 + 
 + 
 + 
 +===== Diagram of System ===== 
 + 
 +{{:​fadercore-blockdiagramm.png?​600|}} 
 + 
 + 
 + 
 + 
 +===== The follwoing steps are to be done: ===== 
 + 
 +Make a board that has connections to 32 displays. - done 
 + 
 +Make a board that has connections to 8 Encoders with LED rings. - done
  
 Make a Faderboard that connects 8 Motorized Faders to the Core board. - done but has to be redone for STM32F4Demo Make a Faderboard that connects 8 Motorized Faders to the Core board. - done but has to be redone for STM32F4Demo
  
-Make a Coreboard ​that connects to 24 Buttons and min. 48LEDs if not (RGB) 72LEDs. ​+Make a board that connects to 24 Buttons and min. 48LEDs if not (RGB) 72LEDs. ​
  
 Make a Frontpanel. - depends on Buttonboard... Make a Frontpanel. - depends on Buttonboard...
  
-Make a Case that is scaleable so it is Possible to rise Fadercounts...+Make a Case that is scaleable so it is Possible to rise the number of Fadermodules...
  
 Make a Demosoftware .NGC file that can be used from Midibox newbies... :-) Make a Demosoftware .NGC file that can be used from Midibox newbies... :-)
  
 +Make a Board that holds the Matrix for small meters.
 +
 +'
 +'
 +
 +
 +
 +===== More details to the Project Parts: =====
 +
 +[[fadercore - VLR-8oDisp|VLR-8oDISP]]
 +
 +[[Fadercore - VLR-Motorfader|VLR-Motorfader]]
 +
 +[[Fadercore - VLR-8Enc|VLR-8Enc]]
 +
 +[[Fadercore - VLR-3x8But|VLR-3x8But]]
 +
 +[[Fadercore - VLR-8x16LEDmeter|VLR-8x16LEDmeter]]
 +
 +[[fadercore - VLR-Frontpanel|VLR-Frontpanel]]
  
 +[[fadercore - VLR-Case|VLR-Case]]
  
-So. im now in year 3. Hope i get that baby walk faster soon... ​ 
  
  
-More details to the Project Parts: +For Questions PM Novski
-VLR-8oDISP +
-VLR-MBHP-MF_NG +
-VLR-8Enc +
-VLR-levelMTX +
-VLR-16LevelLED+
  
fadercore_-_fadermodule_for_audio_daw.1401550721.txt.gz · Last modified: 2014/05/31 15:38 (external edit)