Differences

This shows you the differences between two versions of the page.

--- fadercore_-_fadermodule_for_audio_daw [2014/05/31 15:40]
novski
+++ fadercore_-_fadermodule_for_audio_daw [2014/10/05 16:54] (current)
novski
@@ Line 1: / Line 1: @@
-**Fadercore** is a Project to make a reproducible and scaleable Fadermodule that can be used for DAW proposals.
+====== Fadercore ======
-The goal of Fadercore is to make a Modul of 8 Faders with 1 Oled, 3 Buttons and one Encoder per Fader that are scaleable up to 32 Faders (4 Modules)
+Fadercore is a Project to make a replicable and scaleable Fadermodule that can be used for DAW proposals.
-The Heart of a Fadercore is a STM32F4Demo with a special Header for Display chains...
+I started 2010 with that idea because i was Live Engineer of a concert Location. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly my purposes changes. Now its just a fun Projekt to learn how to design an Electronic Product.
-I started 2010 with that idea because i was Live Engineer of a Club in Switzerland. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly and my purposes changes. Now its just a fun Projekt to learn how hard it is to designing a Electronic Product.
+The goal of Fadercore is to make a Modul of 8 Faderstrips where every strip has 1 Oled, 3 Buttons and one Encoder and is scaleable up to 32 Faders (4 Modules)
-The follwoing steps are to do:
+The Heart of a Fadercore is a STM32F4Demo or a LPC17Core with a special Header for Display chains...
-Make a Coreboard that has connections to 32 displays. - done
+===== Frontpanel =====
-Make a Coreboard that has connections to 8 Encoders with LED rings. - done
+{{:fadercore_frontpanel.png?200|}}
+===== Diagram of System =====
+{{:fadercore-blockdiagramm.png?600|}}
+===== The follwoing steps are to be done: =====
+Make a board that has connections to 32 displays. - done
+Make a board that has connections to 8 Encoders with LED rings. - done
 Make a Faderboard that connects 8 Motorized Faders to the Core board. - done but has to be redone for STM32F4Demo
-Make a Coreboard that connects to 24 Buttons and min. 48LEDs if not (RGB) 72LEDs.
+Make a board that connects to 24 Buttons and min. 48LEDs if not (RGB) 72LEDs.
 Make a Frontpanel. - depends on Buttonboard...
-Make a Case that is scaleable so it is Possible to rise Fadercounts...
+Make a Case that is scaleable so it is Possible to rise the number of Fadermodules...
 Make a Demosoftware .NGC file that can be used from Midibox newbies... :-)
+Make a Board that holds the Matrix for small meters.
+'
+'
-So. im now in year 3. Hope i get that baby walk faster soon...
-More details to the Project Parts:
+===== More details to the Project Parts: =====
 [[fadercore - VLR-8oDisp|VLR-8oDISP]]
-VLR-MBHP-MF_NG
+[[Fadercore - VLR-Motorfader|VLR-Motorfader]]
+[[Fadercore - VLR-8Enc|VLR-8Enc]]
+[[Fadercore - VLR-3x8But|VLR-3x8But]]
+[[Fadercore - VLR-8x16LEDmeter|VLR-8x16LEDmeter]]
+[[fadercore - VLR-Frontpanel|VLR-Frontpanel]]
+[[fadercore - VLR-Case|VLR-Case]]
-VLR-8Enc
-VLR-levelMTX
-VLR-16LevelLED
+For Questions PM : Novski

MIDIbox

User Tools

Site Tools

Differences

Page Tools