MIDIbox

User Tools

Site Tools

Trace:
fadercore_-_vlr-3x8but

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
fadercore_-_vlr-3x8but [2014/07/27 21:55]
novski 		fadercore_-_vlr-3x8but [2014/07/28 07:31] (current)
novski
Line 35: Line 35:
   * 2x10pin Header, 517-30310-6002 ​                                                                                                                 ​   * 2x10pin Header, 517-30310-6002 ​                                                                                                                 ​
   * 5x100nF,​594-K104K15X7RF53K2 ​   * 5x100nF,​594-K104K15X7RF53K2 ​
-  * 2x10k, 774-77061103P ​        +  * 2x10k Network, 774-77061103P ​        
-  * 3x220R, 652-4816P-T1LF-220 ​                                                                                        +  * 3x220R ​Array, 652-4816P-T1LF-220 ​                                                                                        
   * 1x74HC165D, 771-HC165D652   * 1x74HC165D, 771-HC165D652
   * 4x74HC595D, 771-74HC595D ​                                                   * 4x74HC595D, 771-74HC595D ​                                                
-  * 24xLED RGB, +  * 24xLED RGB, 604-WP154A4SUREQBFZW 
 +  * 24x1N4148, 512-1N4148TR
  
-Project Order Basket on Mouser: [[http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=a6dbae9ab7]]+Project Order Basket on Mouser: [[http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=1f42b04e6d]]
  
-The PCB is available under: ​[[http://​vlrlab.com/​lang/​17-8enc.html]] +The PCB is available under: [[https://​www.vlrlab.com/​home/20-3x8but.html]]
- +
-  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** +
-The Encoder on VLRlabs.com ​[[https://​www.vlrlab.com/​encoder/13-bourns-rgb-led-encoder.html]]+
  
  
Line 55: Line 53:
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
-Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,12,13. +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. 
-Then go on with the Topside and the LEDs before soldering the Encoder as last.+Then go on with the Topside and the LEDs.
 Check the Connections with a Lens. Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
-Connect the core on J8/9 to J1 of the VLR-8Enc board.+Connect the core on J8/9 to J1 of the VLR-3x8But ​board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
- +\\ 
-To make it work with MIOS .NGC  File we need to know how the shift-registers are connected. +To make it work with MIOS .NGC  File we need to know how the shift-registers are connected.\\ 
 +\\
 **Inputs:​**\\ **Inputs:​**\\
-1# Encoder ​        1-4\\ +1# Switch Columns  ​1-8\\ 
-2# Encoder ​        5-8\\ +\\
-3# Encoder Button ​ 1-8\\ +
 **Outputs:​**\\ **Outputs:​**\\
-1# RED Shaft LED   1-8\\ +1# ROW Outputs ​    1-6\\ 
-2# GREEN shaft LED 1-8\\ +2# RED LEDs        ​1-8\\ 
-3# BLUE shaft LED  ​1-8\\ +3# GREEN LEDs      ​1-8\\ 
-4# LED Ring Row    ​1-8\\ +4# BLUE LEDs       1-8\\ 
-5# LED Ring Selct  1-8\\ +\\ 
-6# LED Ring Select 9-11\\ +Assuming that the VLR-3x8But ​is the first device on the chain of J8/9 we need to configure it like this:\\
- +
-Assuming that the VLR-8Enc is the first device on the chain of J8/9 we need to configure it like this:+
 \\ \\
 RESET_HW\\ RESET_HW\\
Line 86: Line 80:
 LCD "​%C"​\\ LCD "​%C"​\\
 \\ \\
-# Encoder configuration\\+LCD "​@(1:​1:​1)OLED1"​\\ 
 +LCD "​@(2:​1:​1)OLED2"​\\ 
 +LCD "​@(3:​1:​1)OLED3"​\\ 
 +LCD "​@(4:​1:​1)OLED4"​\\ 
 +LCD "​@(5:​1:​1)OLED5"​\\ 
 +LCD "​@(6:​1:​1)OLED6"​\\ 
 +LCD "​@(7:​1:​1)OLED7"​\\ 
 +LCD "​@(8:​1:​1)OLED8"​\\
 \\ \\
-ENC n=  1   sr=1 pins=0:​1 ​  ​type=detented2\\ +# In this demo we configure individual brightness levels for the LEDs from EVENT_BUTTON events\\
-ENC n=  2   sr=1 pins=2:​3 ​  ​type=detented2\\ +
-ENC n=  3   sr=1 pins=4:​5 ​  ​type=detented2\\ +
-ENC n=  4   sr=1 pins=6:​7 ​  ​type=detented2\\ +
-ENC n=  5   sr=2 pins=0:​1 ​  ​type=detented2\\ +
-ENC n=  6   sr=2 pins=2:​3 ​  ​type=detented2\\ +
-ENC n=  7   sr=2 pins=4:​5 ​  ​type=detented2\\ +
-ENC n=  8   sr=2 pins=6:​7 ​  ​type=detented2\\+
 \\ \\
-# LEDring configuration\\ +LCD "@(1:10:1)RGB Demo #2"\\
-DOUT_MATRIX n= 1  ​rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\+
 \\ \\
-# Encoder events\\ +DIN_MATRIX ​ n=1  ​rows=4  sr_dout_sel1=1  ​sr_din1=1                     button_emu_id_offset=1001\\ 
-EVENT_ENC id= 1  fwd_id=LED_MATRIX:1   type=CC chn= 1 cc= 24  lcd_pos=1:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +DOUT_MATRIX n=1  ​rows=4  ​sr_dout_r1=2    sr_dout_g1=3 sr_dout_b1=4     led_emu_id_offset=1025\\
-EVENT_ENC id= 2  fwd_id=LED_MATRIX:​2 ​  ​type=CC chn= 1 cc= 25  lcd_pos=2:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 3  fwd_id=LED_MATRIX:​3 ​  ​type=CC chn= 1 cc= 26  lcd_pos=3:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 4  ​fwd_id=LED_MATRIX:​4 ​  type=CC chn= 1 cc= 27  lcd_pos=4:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 5  fwd_id=LED_MATRIX:​5 ​  ​type=CC chn= 1 cc= 28  lcd_pos=5:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 6  fwd_id=LED_MATRIX:​6 ​  ​type=CC chn= 1 cc= 29  lcd_pos=6:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 7  fwd_id=LED_MATRIX:​7 ​  ​type=CC chn= 1 cc= 30  lcd_pos=7:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 8  fwd_id=LED_MATRIX:​8 ​  ​type=CC chn= 1 cc= 31  lcd_pos=8:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\+
 \\ \\
-# Encoder Buttons\\+# These button functions forward their value also to LEDs\\ 
 +# it's possible to set the rgb levels in the button event, it will be forwarded as well!\\
 \\ \\
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:8  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff ​lcd_pos=1:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1001  ​fwd_id=LED:1025  type=NoteOn key=36 ​chn=1  rgb=15:0:0 lcd_pos=1:​1:​2 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:16 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:​1:​4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1002  ​fwd_id=LED:1026  ​type=NoteOn key=37 ​chn=1  rgb=15:0:0 lcd_pos=2:1:2 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:24 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:​1:​5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1003 ​ fwd_id=LED:​1027 ​ type=NoteOn key=38 chn=1  rgb=15:​0:​0 ​lcd_pos=3:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1004 ​ fwd_id=LED:​1028 ​ type=NoteOn key=39 chn=1  ​rgb=15:0:0 lcd_pos=4:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1005  ​fwd_id=LED:1029  ​type=NoteOn key=40 ​chn=1  rgb=15:0:0 lcd_pos=5:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1006 ​ fwd_id=LED:​1030 ​ type=NoteOn key=41 chn=1  rgb=15:0:0 lcd_pos=6:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1007 ​ fwd_id=LED:​1031 ​ type=NoteOn key=42 chn=1  rgb=15:​0:​0 ​lcd_pos=7:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1008 ​ fwd_id=LED:​1032 ​ type=NoteOn key=43 chn=1  ​rgb=15:0:0 lcd_pos=8:​1:​2 ​label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=118     ​hw_id=18 ​  fwd_id=LED:7  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1009  ​fwd_id=LED:1033  type=NoteOn key=52 ​chn=1  rgb=0:15:0 lcd_pos=1:1:3 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=118     ​hw_id=18 ​  fwd_id=LED:15 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1010 ​ fwd_id=LED:​1034 ​ type=NoteOn key=53 chn=1  rgb=0:​15:​0 ​lcd_pos=2:​1:​3 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=118     hw_id=18   fwd_id=LED:23 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1011  ​fwd_id=LED:1035  ​type=NoteOn key=54 ​chn=1  rgb=0:15:0 lcd_pos=3:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1012  fwd_id=LED:1036  type=NoteOn key=55 chn=1  rgb=0:15:0 lcd_pos=4:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1013  fwd_id=LED:​1037 ​ type=NoteOn key=56 chn=1  rgb=0:15:0 lcd_pos=5:​1:​3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1014  ​fwd_id=LED:1038  ​type=NoteOn key=57 ​chn=1  rgb=0:15:0 lcd_pos=6:​1:​3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1015 ​ fwd_id=LED:​1039 ​ type=NoteOn key=58 chn=1  rgb=0:15:0 lcd_pos=7:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1016 ​ fwd_id=LED:​1040 ​ type=NoteOn key=59 chn=1  rgb=0:​15:​0 ​lcd_pos=8:1:3 label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:6  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1017  ​fwd_id=LED:1041  type=NoteOn key=68 ​chn=1  rgb=0:0:15 lcd_pos=1:​1:​4 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:14 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1018 ​ fwd_id=LED:​1042 ​ type=NoteOn key=69 chn=1  rgb=0:0:15 lcd_pos=2:1:4 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:22 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1019 ​ fwd_id=LED:​1043 ​ type=NoteOn key=70 chn=1  rgb=0:​0:​15 ​lcd_pos=3:​1:​4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1020  ​fwd_id=LED:1044  ​type=NoteOn key=71 ​chn=1  rgb=0:0:15 lcd_pos=4:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1021 ​ fwd_id=LED:​1045 ​ type=NoteOn key=72 chn=1  rgb=0:​0:​15 ​lcd_pos=5:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1022  ​fwd_id=LED:1046  ​type=NoteOn key=73 ​chn=1  rgb=0:0:15 lcd_pos=6:​1:​4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1023 ​ fwd_id=LED:​1047 ​ type=NoteOn key=74 chn=1  rgb=0:0:15 lcd_pos=7:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1024 ​ fwd_id=LED:​1048 ​ type=NoteOn key=75 chn=1  rgb=0:​0:​15 ​lcd_pos=8:1:4 label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​5  ​type=cc   ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff ​lcd_pos=4:1:3 label="​R^std_btn"​\\ +Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... ​lcd_pos=6:1:5 {6=Display number ​: 1= X-axis ​: 5= Y-Axis (row)}
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​13 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​4 label="​G^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​21 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:1:5 label="​B^std_btn"​\\ +
-\\ +
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​4 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​3 label="​R^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​12 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​4 label="​G^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​20 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​5 label="​B^std_btn"​\\ +
-\\ +
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​3 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:1:3 label="​R^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:11 type=cc ​  chn=1   cc=15   ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​4 label="​G^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​19 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:1:5 label="​B^std_btn"​\\ +
-\\ +
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​2 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​3 label="​R^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​10 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​4 label="​G^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​18 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​5 label="​B^std_btn"​\\ +
-\\ +
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​1 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​3 label="​R^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​9 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​4 label="​G^std_btn"​\\ +
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​17 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​5 label="​B^std_btn"​\\ +
-\\ +
-LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\ +
-LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\ +
-LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\ +
-LED_MATRIX_PATTERN n=2  pos=10 ​ pattern=0000011000000000\\ +
-LED_MATRIX_PATTERN n=2  pos=11 ​ pattern=0000011100000000\\ +
-LED_MATRIX_PATTERN n=2  pos=12 ​ pattern=0000011110000000\\ +
-LED_MATRIX_PATTERN n=2  pos=13 ​ pattern=0000011110000000\\ +
-LED_MATRIX_PATTERN n=2  pos=14 ​ pattern=0000011111000000\\+
  
-Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:1:5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}+For any Comment or Question: Forum Thread???
fadercore_-_vlr-3x8but.1406498138.txt.gz · Last modified: 2014/07/27 21:55 by novski

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki