MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Fadercore ======

Standard 220mm wide modules 

===== VLR-8Enc =====


A PCB to add 8 Encoders with LED ring for each.

{{:fadercore_vlr-8enc_top_bestueckt.png?800|}}

Eagle Files: [[https://github.com/novski/Midibox/tree/master/VLR-8Enc]]

{{:fadercore_8enc_schematic_page_1.png?400|}} {{:fadercore_8enc_schematic_page_2.png?400|}}

{{:fadercore_8enc_dimensions.png?800|}}

==== BOM ====
BIll of Material         

Allways look for the cheapest seller, the Price may vary heavy!!!
And look for Local dealers preferred. [[http://www.midibox.org/dokuwiki/doku.php?id=where_to_order_components]]

== The Encoders ==

I was fascinated about the RGB Shaft of this Encoder so i developed all opon this nice piece.
Its not the cheapest but i sell them for a reasonable price.
 
**And its still possible to use a non Illuminated Encoder.**

== The other Materials: Mouser ==

  * 2x10pin Header, 517-30310-6002            
  * 2xULN2803, 595-ULN2803ADWR                                                                                                       
  * 9x100nF,594-K104K15X7RF53K2 
  * 6x10k, 774-77061103P        
  * 4x220, 652-4816P-T1LF-220                         
  * 3x220, 660-MF1/2LCT52R221J                                                                   
  * 3x74HC165D, 771-HC165D652
  * 3x74HC595D, 771-74HC595D                                                 
  * 3xTPIC6B595, because the MOQ is 250 i deliver them for you with the PCB.
  * 88xLED RED, 604-WP3A8HD
  * 88xLED holder 6mm Height, 749-ELM-5-6MM

Project Order Basket on Mouser: [[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a6dbae9ab7]]

The PCB is available under: [[http://vlrlab.com/lang/17-8enc.html]]

==== How to get Started ====


==== Prepare the PCB ====


==== Prepare the Connection ====


==== Test it in MIOS ====
MIDIbox

User Tools

Site Tools

Page Tools
