User Tools

Site Tools


fadercore_-_vlr-8enc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
fadercore_-_vlr-8enc [2014/07/26 15:21]
novski
fadercore_-_vlr-8enc [2014/07/27 21:23] (current)
novski
Line 1: Line 1:
-====== ​Fadercore ​======+[[fadercore_-_fadermodule_for_audio_daw|Fadercore]]
  
 Standard 220mm wide modules ​ Standard 220mm wide modules ​
Line 31: Line 31:
 == The other Materials: Mouser == == The other Materials: Mouser ==
  
-  * 2x10pin Header, 517-30310-6002 +  * 2x10pin Header, 517-30310-6002 ​            
-  * 1xResistor Array 220Ohm SMD,  +  * 2xULN2803, 595-ULN2803ADWR ​                                                                                                      ​ 
-  * 1x74HC595 SMD,  +  * 9x100nF,​594-K104K15X7RF53K2  
- +  * 6x10k, 774-77061103P ​        
-                +  * 4x220, 652-4816P-T1LF-220 ​                        ​ 
-  * 2xULN2803, 595-ULN2803ADWR ​                                                                                                                  ​ +  * 3x220, 660-MF1/​2LCT52R221J ​                                                                  ​ 
-  * 9x100nF,​594-K104K15X7RF53K2 ​                      +  * 3x74HC165D, 771-HC165D652 
-  * 6x10k, 774-77061103P ​                                                            +  * 3x74HC595D, 771-74HC595D ​                                                
-  * 4x220, 652-4816P-T1LF-220 ​                                                                    +
-  * 3x220, 660-MF1/​2LCT52R221J ​                                                                                                  ​ +
-  * 3x74HC165N ​                                                                                       +
-  * 3x74HC595 ​                                                                                                     +
-  * 8xBOURNS_PEL12T ​                                                   ​+
   * 3xTPIC6B595,​ because the MOQ is 250 i deliver them for you with the PCB.   * 3xTPIC6B595,​ because the MOQ is 250 i deliver them for you with the PCB.
-  * 88xLED+  * 88xLED ​RED, 604-WP3A8HD
   * 88xLED holder 6mm Height, 749-ELM-5-6MM   * 88xLED holder 6mm Height, 749-ELM-5-6MM
  
-Project Order Basket on Mouser: [[]]+Project Order Basket on Mouser: [[http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=a6dbae9ab7]] 
 + 
 +The PCB is available under: [[http://​vlrlab.com/​lang/​17-8enc.html]] 
 + 
 +  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** 
 +The Encoder on VLRlabs.com [[https://​www.vlrlab.com/​encoder/​13-bourns-rgb-led-encoder.html]]
  
-The PCB is available under: [[https://​vlrlab.com/​pcb/​10-8-odisplay.html]] 
  
 ==== How to get Started ==== ==== How to get Started ====
  
 +If its your first SMD soldering you can follow this on t1:58 : http://​www.youtube.com/​watch?​v=5uiroWBkdFY
 +I recommend to not buy solder paste, instead buy some flux-paste like this on Mouser: 590-8341-10ML
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
 +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,​12,​13. 
 +Then go on with the Topside and the LEDs before soldering the Encoder as last. 
 +Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
 +Connect the core on J8/9 to J1 of the VLR-8Enc board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
 +
 +To make it work with MIOS .NGC  File we need to know how the shift-registers are connected.
 +
 +**Inputs:​**\\
 +1# Encoder ​        1-4\\
 +2# Encoder ​        5-8\\
 +3# Encoder Button ​ 1-8\\
 +
 +**Outputs:​**\\
 +1# RED Shaft LED   1-8\\
 +2# GREEN shaft LED 1-8\\
 +3# BLUE shaft LED  1-8\\
 +4# LED Ring Row    1-8\\
 +5# LED Ring Selct  1-8\\
 +6# LED Ring Select 9-11\\
 +
 +Assuming that the VLR-8Enc is the first device on the chain of J8/9 we need to configure it like this:
 +\\
 +RESET_HW\\
 +\\
 +LCD "​%C"​\\
 +\\
 +# Encoder configuration\\
 +\\
 +ENC n=  1   sr=1 pins=0:​1 ​  ​type=detented2\\
 +ENC n=  2   sr=1 pins=2:​3 ​  ​type=detented2\\
 +ENC n=  3   sr=1 pins=4:​5 ​  ​type=detented2\\
 +ENC n=  4   sr=1 pins=6:​7 ​  ​type=detented2\\
 +ENC n=  5   sr=2 pins=0:​1 ​  ​type=detented2\\
 +ENC n=  6   sr=2 pins=2:​3 ​  ​type=detented2\\
 +ENC n=  7   sr=2 pins=4:​5 ​  ​type=detented2\\
 +ENC n=  8   sr=2 pins=6:​7 ​  ​type=detented2\\
 +\\
 +# LEDring configuration\\
 +DOUT_MATRIX n= 1  rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\
 +\\
 +# Encoder events\\
 +EVENT_ENC id= 1  fwd_id=LED_MATRIX:​1 ​  ​type=CC chn= 1 cc= 24  lcd_pos=1:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 2  fwd_id=LED_MATRIX:​2 ​  ​type=CC chn= 1 cc= 25  lcd_pos=2:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 3  fwd_id=LED_MATRIX:​3 ​  ​type=CC chn= 1 cc= 26  lcd_pos=3:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 4  fwd_id=LED_MATRIX:​4 ​  ​type=CC chn= 1 cc= 27  lcd_pos=4:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 5  fwd_id=LED_MATRIX:​5 ​  ​type=CC chn= 1 cc= 28  lcd_pos=5:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 6  fwd_id=LED_MATRIX:​6 ​  ​type=CC chn= 1 cc= 29  lcd_pos=6:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 7  fwd_id=LED_MATRIX:​7 ​  ​type=CC chn= 1 cc= 30  lcd_pos=7:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 8  fwd_id=LED_MATRIX:​8 ​  ​type=CC chn= 1 cc= 31  lcd_pos=8:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\
 +\\
 +# Encoder Buttons\\
 +\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​8 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​16 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=117 ​    ​hw_id=17 ​  ​fwd_id=LED:​24 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=1:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​7 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​15 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=118 ​    ​hw_id=18 ​  ​fwd_id=LED:​23 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=2:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​6 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​14 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=119 ​    ​hw_id=19 ​  ​fwd_id=LED:​22 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=3:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​5 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​13 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​21 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​4 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​12 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​20 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​3 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​11 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​19 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​2 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​10 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​18 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​5 label="​B^std_btn"​\\
 +\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​1 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​3 label="​R^std_btn"​\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​9 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​4 label="​G^std_btn"​\\
 +EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​17 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​5 label="​B^std_btn"​\\
 +\\
 +LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\
 +LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=10 ​ pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=11 ​ pattern=0000011100000000\\
 +LED_MATRIX_PATTERN n=2  pos=12 ​ pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=13 ​ pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=14 ​ pattern=0000011111000000\\
 +
 +Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:​1:​5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
fadercore_-_vlr-8enc.1406388087.txt.gz · Last modified: 2014/07/26 15:21 by novski