MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Fantoms PCBs======


On this page I will list pcb designs I made. Some are tested, some are not. I will add a note to every PCB.
\\
\\

==== Fatar keybed adapter ====
This is a adapter which is made for connect a FATAR keybed directly to the DIO-matrix without soldering. The rest should be self explaining.

Status: **tested**\\
Eagle *.brd: [[https://www.dropbox.com/s/y5kh9n5zghuzk0v/88_Fatar%20Adapter.brd?dl=0|Fatar adapter]]

{{:fatar_adapter.png?500|}}

\\
\\

==== LED Ring ====
  
This is a LED ring which contains 15 LEDs arranged in a ring and the last LED as indication-led for the switch of an encoder. The LEDs are 0805 SMD type. 

Status: **untested**\\
Eagle *.brd: not released yet

{{:fantomxr_led_ring.png?200|}}

\\
\\

==== 4x Switchboard ====
  
This is a PCB for four marquardt 6425 switches, available with and without LEDs. In case you want to connect a DIO matrix to it, I added footprints for resistors but there are solder bridges too. In any case: Either solder the solder bridge or add a resistor to get the LEDs working.
In case you only need two or three switches, you can simply cut it. I added two-pin-pinheader to every switch for connecting the LEDs.

Status: **tested**\\
Eagle *.brd: [[https://www.dropbox.com/s/zgblcichkkk936a/4x_Switchboard_M.brd?dl=0|4x Switchboard]]

{{:fantomxr_4xswitch.png?500|}}

\\
\\

==== 8x Switchboard ====
  
See above. SMD resistors are used here.

Status: **tested**\\
Eagle *.brd: [[https://www.dropbox.com/s/22pcihmt7j4r4wa/8x_Switchboard_M.brd?dl=0|8x Switchboard]]

{{:fantomxr_8xswitch.png?500|}}
MIDIbox

User Tools

Site Tools

Page Tools
