Differences

This shows you the differences between two versions of the page.

--- home:mbhp:module:bootloader-switch [2018/04/01 20:08]
phatline created
+++ home:mbhp:module:bootloader-switch [2018/04/01 21:00] (current)
phatline
@@ Line 1: / Line 1: @@
 ====== BootLoader-Switch ======
 when activated it will force Core32 to bootup in Bootload mode, doesnt matter how buggy your progam is... \\
-you need:
+**you need:**\\
 x wires\\
 x 2Pin-Header\\
 On-OFF Switch\\
-solder this like in this Picture:\\
+**solder this like shown here:**\\
 {{:phatline:bootloader-switch.jpg?700|}}\\
-and connect it to following pins:\\
+**connect it to following pins of CORE32F4:**\\
 {{:phatline:bootloader-switch-detail.jpg?800|}}\\
-you maybe not need this, but when you need it, its good to have such switch on the backside of your midibox (@least when uploading, buggy betas, or you code your own program...)
+you maybe not need this, but when you need it, its good to have such switch on the backside of your midibox (@least when uploading, buggy betas, or you code your own program...)\\
+//
+greetings - Phatline//

MIDIbox