User Tools

Site Tools


mb-lre8x2cs_pcb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mb-lre8x2cs_pcb [2013/02/21 13:33]
fairlightiii [Whishlist] update
mb-lre8x2cs_pcb [2016/06/22 00:03] (current)
psykhaze [Pictures]
Line 1: Line 1:
-===== MB-LRE8x2CS PCB / 16 LEDrings/​Encoders Control Surface=====+====== MB-LRE8x2CS PCB / 16 LEDrings/​Encoders Control Surface ​======
  
 Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules with 16 LEDrings and 16 encoders. Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules with 16 LEDrings and 16 encoders.
Line 9: Line 9:
 It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings. It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings.
  
-==== PCB ====+===== PCB =====
  
 The PCB have components soldered on the two sides.\\ ​ The PCB have components soldered on the two sides.\\ ​
Line 20: Line 20:
 The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\ ​ The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\ ​
  
-====Pictures====+=====Pictures=====
  
 ==Protoboard (note this is not the last version but has same dimensions and LEDs/​Encoders positioning):​== ==Protoboard (note this is not the last version but has same dimensions and LEDs/​Encoders positioning):​==
Line 233: Line 233:
   * <​del>​Trying to move some critical vias</​del>​. ​  //​Fairlightiii//​ **Done**   * <​del>​Trying to move some critical vias</​del>​. ​  //​Fairlightiii//​ **Done**
   * What about the use of ULN2803s? ​  //​Fairlightiii//​ **Let them here for 8x2 configuration,​ not present on upcoming 4x2 and 8x1 boards**   * What about the use of ULN2803s? ​  //​Fairlightiii//​ **Let them here for 8x2 configuration,​ not present on upcoming 4x2 and 8x1 boards**
-  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?​). ​  //​Fairlightiii//​ **No implemented** +  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?​). ​  //​Fairlightiii//​ **Not planned to be implemented** 
-  * What about the size of the PCB?   //​Fairlightiii//​**Slightly less big (I won some mm in the edges)** +  * What about the size of the PCB?   //​Fairlightiii//​ **Slightly less big (I won some mm in the edges)** 
-  * new arrangment of encoders and LED-rings in 4x4 matrix? ​ //​MaG2k//​**Upcoming 4x2 and 8x1 boards**+  * new arrangment of encoders and LED-rings in 4x4 matrix? ​ //MaG2k// **Upcoming 4x2 and 8x1 boards**
mb-lre8x2cs_pcb.1361453609.txt.gz · Last modified: 2013/02/21 13:33 by fairlightiii