User Tools

Site Tools


mb-lre8x2cs_pcb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mb-lre8x2cs_pcb [2016/06/22 00:02]
psykhaze [MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface]
mb-lre8x2cs_pcb [2016/06/22 00:03] (current)
psykhaze [Pictures]
Line 9: Line 9:
 It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings. It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings.
  
-==== PCB ====+===== PCB =====
  
 The PCB have components soldered on the two sides.\\ ​ The PCB have components soldered on the two sides.\\ ​
Line 20: Line 20:
 The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\ ​ The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\ ​
  
-====Pictures====+=====Pictures=====
  
 ==Protoboard (note this is not the last version but has same dimensions and LEDs/​Encoders positioning):​== ==Protoboard (note this is not the last version but has same dimensions and LEDs/​Encoders positioning):​==
mb-lre8x2cs_pcb.1466553775.txt.gz ยท Last modified: 2016/06/22 00:02 by psykhaze