User Tools

Site Tools


mb-modulbox-ng

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mb-modulbox-ng [2016/08/15 00:46]
psykhaze [MB-ModulBox NG]
mb-modulbox-ng [2016/10/08 12:53]
psykhaze
Line 3: Line 3:
 {{ ::​neonking:​modulbox-logo.jpg?​direct&​600 |}} {{ ::​neonking:​modulbox-logo.jpg?​direct&​600 |}}
  
-// <wrap info> Under Heavy Developpment ​@ **15/8/2016** </​wrap>//​ +// <wrap info> Under Construction ​@ **8/10/2016** </​wrap>//​
- +
-===== Introduction ===== +
- +
-The MB-Modulbox-NG Project is a modern version of the **[[Modulbox]]** project ​ . +
-\\ +
-In short words, it's a **Eurorack-size compliant Modular MIDIbox Control Surface ** based upon MB-NG. +
- +
-From a **Main Part,small modules would be chained to Build the custom-sized control surface of your dreams by choosing the MIDI controls you want**.  +
- +
-Main part would also allow **Access to Menus for configuring and saving things on SD Card** , and optionnal **External Analog Inputs/​Outputs** __to trigger from external sensors and/or drive your analog synth__. +
- +
-**Each Small Module will have a Different type of Interaction** and will include Digital Shift Registers and/or Multiplexers For Analog lines . Then modules would be chained one to another up to main part.  +
- +
-Modules **Chain Connectors ​ will be 2.54mm dual row pinheader** (Molex?) and will carry Digital/​Analog bus lines and Current supply. PSU Main input will be on main part PCB. +
- +
-====Main Part Features ==== +
- +
-  - **[[stm32f4_core_board_parts_list|STM32F4 Board]]**  +
-  - **[[scs_module|Standard Control Surface]]** with 6 Tactile switches, Push - Encoder ,​**[[OLED]]** Graphical screen +
-  - **[[sd_card_module|SD Card Slot]]** (+USB in?) +
-  - **[[midi_io_matrix_board_parts_list|2xMIDI IN + 2xMIDI OUT 2.5mm jack Plugs]]**  +
-  - **Optionnal 16x3.5mm jacks** for external **[[ainser64_board_parts_list|Analog Ins]]**/​**[[aout_board_parts_list|Analog Outs]]** with External interfaces for expanding.  +
- +
-===== Community users working on it ===== +
- +
-  * **[[Ksir]] ** - Modulbox Original Designer - PCB Design - Programming +
-  * **[[Psykhaze]]** - Documentation - Frontpanel design - PCB Design - Programming +
-  * **[[Latigid On]]** - PCB Design -Troubleshooting Help +
- +
-==== Getting Involved ? ==== +
- +
-Just let a Private message on the forum to users already involved +
- +
- +
-===== Software Tools used ===== +
- +
-  * **[[inkscape|Inkscape Vector Drawing Software]]** - Front panel Concept Drawing +
-  * **[[kicad|KiCAD PCB]]** - PCB Design | **[[http://​smisioto.no-ip.org/​elettronica/​kicad/​kicad-en.htm|KiCAD Librairies]]** +
-  * **[[FreeCAD|FreeCAD 3D Technical Drawing]]** - Case Design +
-  * **[[codeblocks_ide|Code::​Blocks Integrated Development environment]]** - GUI Software - MIOS programming +
-  * **[[tools#​juce_library| JUCE ]]** - Cross-Platform Audio/​MIDI/​GUI Library +
- +
-=====PCB process===== +
- +
-  - <​del>​Parts List - Datasheets Gathering - Reference selection </​del>​ +
-  - KiCAD Library +
-  - Schematics +
-  - FootPrint Creation / Association to schematics +
-  - Netlist Export +
-  - Make Pcb routing - Put pinheader/​jumper to Strategic Troubleshooting Places. +
- +
- +
-===== Architecture ===== +
- +
-==== Modulbox-NG ==== +
-\\ +
-{{ ::​neonking:​modulbox-ng-architecture.jpg?​direct&​800 |}} +
- +
- +
- +
-==== Eurorack design ==== +
- +
-  * **Eurorack Design is 3U Height ** So frontpanel //​=5,​25"​=133mm-rails=__**128,​5mm**__//​ Height . \\ Sandwich Design is ok here due to non heating components and allow to spare space.  +
-  * **Modules Frontpanels are 8HP-multiple wide** //​(8HP=__**40,​3mm**__)//​ see //​**[[http://​www.doepfer.de/​a100_man/​a100m_e.htm|Eurorack Specification]]**//​. \\ Frontpanel back spacers glued with JB-weld to avoid front screwing. **{{::​neonking:​eurotemplates.pdf|Eurorack Templates PDF}}**\\ +
-  * **PCB Size is 100mm height** To stay compliant to **//​[[http://​www.elma.com/​en/​services/​us-resources/​eurocard-specs/​|Eurocard Specification]]//​** +
- +
-==== Splitted View ==== +
- +
-{{ ::​neonking:​modulbox-sandwich.jpg?​direct&​800 |}} +
-\\ +
-===== Tech Demos Videos ===== +
-{{youtube>​ZqLzL6nxHbs?​small}} +
-{{youtube>​utr23hp2nRM?​small}} +
-{{youtube>​KQALHoqk4XA?​small}} +
-{{youtube>​UJk1jdHCvuw?​small}} +
-{{youtube>​CShjSiQ0RfI?​small}} +
-{{youtube>​lMXShQIceW8?​small}} +
-{{youtube>​BSrms30Ubko?​small}} +
-{{youtube>​uzEka3lR8BM?​small}} +
-{{youtube>​Vy-jFTRzuCo?​small}} +
-\\ +
-===== Modules List + UI Parts ===== +
-\\ +
-^ Module ​     ^ N°       ^ Analog ​     ^ LED      ^Encoders ​    ^ Switches ​   ^HP  ^ User   ^ Display^ +
-|Main UI+Main PCB|1      |Jacksx16 ​    ​| ​         |x1 PushRotary|Tactilex6 ​   |24  |Psykhaze/​Latigid|Graphic-OLEDx1| +
-|OLED-SCS ​    ​|2 ​        ​| ​            ​| ​         |x1 PushRotary|Tactilex6 ​   |24  |Latigid |Small-OLEDx1->​8| +
-|Vertical 4xOLEDS|3 ​     |             ​| ​         |             ​| ​            ​|16 ​ |Latigid |Small-OLED x4 | +
-|LCD Vertical SCS|4      |             ​| ​         |x1 PushRotary|Tactilex(4+4+2)|16| ​       |CLCD 20x4| +
-|LCD Horizontal Extended SCS|5 |       ​| ​         |x2 PushRotary|Tactilex22 ​  ​|32 ​ |Psykhaze|2xCLCD 40x4| +
-|Encoders x8  |6         ​| ​            ​| ​         |x8 PushRotary| ​            ​|8 ​  | Ksir   ​| ​       | +
-|Pots x8      |7         |Pots x8      |          |             ​| ​            ​|8 ​  | Ksir   ​| ​       | +
-|LED Ring Encoders x4|8  |             |16x4 3mm  |x4 PushRotary| ​            ​|8 ​  ​| ​       |        | +
-|Faders 2x2   ​|9 ​        ​|Fadersx4 ​    ​| ​         |             ​| ​            ​|8 ​  ​| ​       |        | +
-|Light-Fader 2x2|10 ​     |Light-Fadersx4| ​        ​| ​            ​| ​            ​|8 ​  ​| ​       |        | +
-|Long Faders x2 |11      |Long Fadersx2 |         ​| ​            ​| ​            ​|8 ​  ​|Psykhaze| ​       | +
-|Motor Fader x1|12       ​|Motor Fader  |16x3mm ​   |             ​| ​            ​|8 ​  ​|Psykhaze| ​       | +
-|Switches x8 A|13        |             ​| ​         |             ​|Tactilex8 ​   |8   | Ksir   ​| ​       | +
-|Switches x8 B|14        |             ​|8xBicolor |             ​|Toggle 3 polesx8|8| Ksir   ​| ​       | +
-|Light-Switches x8 A|15  |             ​|Bicolor Opt|         ​|Light Tactilex8|8 ​   | Ksir   ​| ​       | +
-|Light-Switches x8 B|16  |             ​| ​         |             ​|Light Togglex8|8 ​ | Ksir   ​| ​       | +
-|Numeric Displayx2|17 ​   |             ​| ​         |x2 PushRotary| ​            ​|8 ​  ​| ​       |2x Numeric| +
-|Numeric Displayx4|18 ​   |             ​| ​         |x4 PushRotary| ​            ​|16 ​ |        |4x Numeric| +
-|8x8 LED Modulation Matrix|19| ​        ​|x(8x8)3mm |             ​|Tactilex(8+8)|16 ​ |        |        | +
-|16x16 LED DotMatrix|20 ​ |             ​| ​         |             ​| ​            ​|16 ​ |Psykhaze|4xDotMatrix| +
-|8x16 RGB DotMatrix|21 ​  ​| ​            ​| ​         |             ​| ​            ​|16 ​ |Psykhaze|2xDotMatrix| +
-|Additional Analog In or Out Interface|22|Jacksx8| ​ |x8 PushRotary|Toggle 4 polesx2|16|Psykhaze|Small-OLEDx2 | +
-|Crosspoint Matrix 8x4(x4)|23|Jacksx(8+4)|x(8x4) 3mm |      |Toggle 4poles, Tactilex(8+4)|16|Psykhaze| ​ | +
-|Adafruit Silicon 3mm 8x8 Matrix|24| ​  ​|x(8x8)3mm |  |Adafruit Silicon (4x4)x4|24 ​ |Psykhaze| ​       | +
-|Sparkfun Silicon 5mm 4x4 RGB Matrix|25| ​ |16xWS2812 |      |Sparkfun Silicon 4x4|24|Latigid| ​       | +
-|RGB Encoder 4x4 Matrix|26| ​           |        |RGB Encoders x16|            |24  |Latigid |        | +
-|Joystick ​    ​|27 ​       |2xJoystick ​  ​|2xRGB ​    ​| ​             |            |8   ​| ​       |        | +
-|Linear Touch |28        |1x(Force)Linear Sensor| 8xWS2812| ​     |            |8   ​|Psykhaze| ​       | +
-|Circular touch|29 ​      ​|1x(2x)Circular Sensor|16(x2)xWS2812| ​  ​| ​           |16  |Psykhaze| ​       | +
-|Force touch  |30        |4xForce touch|4xRGB ​    ​| ​             |            |8   ​| ​       |        | +
-|MiniDeck DJ Control|31|1xScratchFader+ 1xVertical Fader|x8 3mm|x1 Code Wheel +x3 PushRotary| |32|   | | +
- +
-===== Frontpanels Layouts ===== +
-\\ +
-{{:​neonking:​modulbox-panels.jpg?​direct&​730|}} +
-{{:​neonking:​modulbox-panels2.jpg?​direct&​770|}} +
-{{:​neonking:​modulbox-panels3.jpg?​direct&​870|}} +
-\\ +
-\\ +
-===== Modules Ins/Outs + Related Parts ===== +
-\\ +
-^ .            ^ 1 ^ 2 ^ 3 ^ 4 ^ 5 ^ 6 ^ 7 ^ 8 ^ 9 ^ 10 ^ 11 ^ 12 ^ 13 ^ 14 ^ 15 ^ +
-| Digital Ins  |8 |0>​16|/ ​ |12 |30 |16 |/  |8  |/  |/   ​|/ ​  ​|? ​  ​|8 ​  ​|24 ​ |8   | +
-| 74HC165 #    |1  |0>​2|/ ​ |2  |4  |2  |/  |1  |/  |/   ​|/ ​  ​|? ​  ​|1 ​  ​|3 ​  ​|1 ​  | +
-| Digital Outs |/  |/  |/  |/  |/  |/  |/  |16 |/  |/   ​|/ ​  ​|16+?​|/ ​  ​|16 ​ |8>16| +
-| 74HC595 #    |/  |/  |/  |/  |/  |/  |/  |2  |/  |/   ​|/ ​  |2+? |/   ​|2 ​  ​|1>​2 | +
-| Analog Ins   ​|/ ​ |/  |/  |/  |/  |/  |16 |/  |8  |8   ​|4 ​  ​|? ​  ​|/ ​  ​|/ ​  ​|/ ​  | +
-| CLCD #       ​|/ ​ |/  |/  |1  |2  |/  |/  |/  |/  |/   ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  | +
-| OLED #       ​|1 ​ |1>​8|4 ​ |/  |/  |/  |/  |/  |/  |/   ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  | +
- +
-^ .            ^ 16 ^ 17 ^ 18 ^ 19 ^ 20 ^ 21 ^ 22 ^ 23 ^ 24 ^ 25 ^ 26 ^ 27 ^ 28 ^ 29 ^ 30 ^ 31 ^ +
-| Digital Ins  |16  |4   ​|8 ​  ​|16 ​ |/   ​|/ ​  ​|24 ​ |15  |16  |16  |32  |/   ​|3 ​  ​|/ ​  ​|/ ​  ​|12 ​ | +
-| 74HC165 #    |2   ​|1 ​  ​|1 ​  ​|2 ​  ​|/ ​  ​|/ ​  ​|3 ​  ​|2 ​  ​|2 ​  ​|2 ​  ​|4 ​  ​|/ ​  ​|1 ​  ​|/ ​  ​|/ ​  ​|2 ​  | +
-| Digital Outs |8   ​|16 ​ |32? |16  |16  |32  |/   ​|16 ​ |16  |/   ​|/ ​  ​|6 ​  ​|/ ​  ​|/ ​  ​|12 ​ |8   | +
-| 74HC595 #    |1   ​|2 ​  ​|4 ​  ​|2 ​  ​|2 ​  ​|4 ​  ​|/ ​  ​|2 ​  ​|2 ​  ​|/ ​  ​|/ ​  ​|1 ​  ​|/ ​  ​|/ ​  ​|2 ​  ​|1 ​  | +
-| Analog Ins   ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|0>​8 |/   ​|/ ​  ​|/ ​  ​|/ ​  ​|8 ​  ​|/ ​  ​|3>​6 |8   ​|8 ​  | +
-| CLCD #       ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  | +
-| OLED #       ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|1 ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  ​|/ ​  | +
- +
-===== Parts References ===== +
-\\ +
-==== Parts Datasheets ==== +
- +
-^ Designation ​        ^ Datasheet Link ^ Reference ​                                     ^ +
-| Serial Register IN  |{{http://​www.mouser.com/​ds/​2/​405/​cd74hc165-441105.pdf|74HC165}} ​ |cd74hc165| +
-| Serial Register OUT |{{http://​www.mouser.com/​ds/​2/​405/​cd74hc595-406651.pdf|74HC595}} ​ |cd74hc595| +
-| Line Driver ​        ​|{{http://​www.mouser.com/​ds/​2/​405/​cd74hct541-439778.pdf|74HCT541}}|cd74hct541| +
-| OptoCoupler ​        ​|{{http://​www.mouser.com/​ds/​2/​149/​6N138M-770001.pdf|6N138}} ​      ​|6N138M| +
-|Analog>​Digital Converter|{{http://​www.mouser.com/​ds/​2/​268/​21298c-68472.pdf|MCP3208}} ​  ​|MCP3208| +
-| Multiplexer switch ​ |{{http://​www.mouser.com/​ds/​2/​405/​cd74hc4051-441652.pdf|MOS4051}} |cd74hc4051| +
-|Digital>​Analog Converter|{{http://​www.mouser.com/​ds/​2/​256/​MAX525-105108.pdf|MAX525}} ​  ​|MAX525| +
-|Operational Amplifier|{{http://​www.mouser.com/​ds/​2/​268/​21733e-41017.pdf|MCP600X}} ​     |MCP6008| +
-| Crosspoint Switch ​  ​|{{http://​www.mouser.com/​ds/​2/​465/​cd22m3494-553706.pdf|CD22m3494}}|CD22m3494| +
-| Switch Rotary Encoder ​ |{{http://​www.mouser.com/​ds/​2/​15/​EC11-951851.pdf|Alps EC11E}} ​ |EC11E15244B2| +
-| 5mm WS2812 LED      |{{https://​cdn.sparkfun.com/​datasheets/​Components/​LED/​COM-12877.pdf|WS2812}} ​ |APA-106-F5| +
-| 5mm RGB LED         ​|{{https://​www.sparkfun.com/​datasheets/​Components/​LED/​YSL-R596CR4G3B5W-F12.pdf|RGB LED}}| SL-R596CR4G3B5W-F12| +
-| Tactile Switch ​   |[[http://​www.alps.com/​products/​WebObjects/​catalog.woa/​E/​HTML/​Tact/​SnapIn/​SKHH/​SKHHDTA010.html|Small Round Tactile Switch]]|SKHHDTA010| +
-| Tactile Switch 2       ​|{{http://​www.mouser.com/​ds/​2/​467/​30030752_01_K-218529.pdf|Square Tactile Switch}}| 03.0752| +
-| Light-Tactile Switch ​  ​|{{http://​www.mouser.com/​ds/​2/​307/​en-b3w-9-11824.pdf|Square Light Tactile switch}} ​                  ​|B3W-9000-G1N,​ B3W-9000-R1N, ​ B3W-9000-Y1N,​ B3W-9000-RG2N| +
-| Toggle ​ Switch 3/4 Poles|{{http://​www.mouser.com/​ds/​2/​140/​100-346274.pdf|Toggle Switch}}|100SP1T2B3M2QEH | +
-| Light-Toggle Switch |{{http://​www.mouser.com/​ds/​2/​295/​gtogglesilluminated-28905.pdf|Light Toggle Switch}}|G12JPCF| +
-|Code Wheel+ Optical Encoder|{{http://​www.mouser.com/​ds/​2/​678/​V02-3608EN-DS-HEDB-9100-12Jun2012-952641.pdf|Encoder+ Code Wheel}}|HEDB-9100-C12| +
-| Fader                  |{{http://​www.mouser.com/​ds/​2/​54/​ta-778345.pdf|Bourns PTA}}|PTA3043-2015CPB103,​PTA6043-2015CPB103| +
-| Long Fader |[[http://​www.alps.com/​prod/​info/​E/​HTML/​Potentiometer/​SlidePotentiometers/​RSNS/​RSA0N11S9A0K.html|ALPS RS series]] |RSA0N11S9A0K | +
-| Long Fader 2| {{http://​www.mouser.com/​ds/​2/​54/​tb-777940.pdf|Bourns PTB}} |PTB0143-2010BPB103 | +
-| Light-Fader ​           |{{https://​www.bourns.com/​pdfs/​PTL.pdf|Bourns PTL}}|PTL30-10G1-103B2,​ PTL30-15R1-104B2,​ PTL60-10G1-103B2,​ PTL60-15R1-104B2| +
-| Motor Fader |[[http://​www.alps.com/​WebObjects/​catalog.woa/​E/​HTML/​Potentiometer/​SlidePotentiometers/​RSN1M/​RS60N11M9A0F.html| Alps MotorFader 60mm]] |RS60N11M9A0F | +
-| Rotary Pot             ​|[[http://​www.alps.com/​products/​WebObjects/​catalog.woa/​E/​HTML/​Potentiometer/​RotaryPotentiometers/​RK09L/​RK09L1140A66.html|ALPS Rotary pot]]|RK09L1140A66| +
-| SD Card Socket ​        ​|{{http://​www.mouser.com/​ds/​2/​170/​SD_Card_Module_DIM-771234.pdf|SD Socket}} ​      ​|SDCRD-GM-271| +
-| OLED 256x64px 3,12" |{{http://​www.mouser.com/​ds/​2/​291/​NHD-3.12-25664UMY3-218218.pdf|Newhaven OLED}} |NHD-3.12-25664UMY3| +
-| OLED 256x64px 3,2 " |{{http://​www.buydisplay.com/​download/​manual/​ER-OLEDM032-1_Series_Datasheet.pdf|3.2"​ OLED}}|ER-OLEDM032| +
-| OLED 128x64px 0,96" |{{http://​www.buydisplay.com/​download/​manual/​ER-OLEDM0.96-1_Series_Datasheet.pdf|0.96"​ OLED}} | ER-OLEDM0.96| +
-| CLCD 20x4           ​|{{http://​www.buydisplay.com/​download/​manual/​ERM2004-1_Series_Datasheet.pdf|20x4 LCD}}|ERM2004| +
-| CLCD 40x4           ​|{{http://​www.buydisplay.com/​download/​manual/​ERM4004-1_Series_Datasheet.pdf|40x4 LCD}}|ERM4004| +
-| 8x8 Monochrome DotMatrix ​  ​|{{http://​www.mouser.com/​ds/​2/​216/​TC15-11EWA-46655.pdf|8x8 Dotmatrix}} ​               |TC15-11EWA| +
-| 8x8 RGB DotMatrix ​  ​|{{https://​www.sparkfun.com/​datasheets/​Components/​YSM-2388CRGBC.pdf|8x8 RGB Dotmatrix}} ​               |YSM-2388CRGBC| +
-|3 Digits Numeric Display |{{http://​www.mouser.com/​ds/​2/​216/​BA56-12SRWA-39648.pdf|3 Digits Numeric Display}}|BA56-12SRWA| +
-|Silicon 4x4 Button Matrix 5mm|[[https://​www.sparkfun.com/​products/​7835|Silicon 4x4 5mm Button Matrix]] ​            |/| +
-|Silicon 4x4 Button Matrix 3mm|[[https://​www.adafruit.com/​products/​1611|Silicon 4x4 3mm Button Matrix]] |/| +
-| jack 3,5mm mono     ​|[[https://​www.thonk.co.uk/​product-category/​diy-accessories/​jacks/​|Jack 3.5mm]] |35RAPC2AV, PJ301BM| +
-| Joystick 1          |[[https://​www.adafruit.com/​products/​245|Joystick 1]] |/| +
-| Joystick 2          |[[https://​www.adafruit.com/​products/​3102|Joystick 2]] |/| +
-| Force Touch Sensor ​ |{{https://​www.interlinkelectronics.com/​datasheets/​Datasheet_FSR.pdf|Interlink FSR402}}|34-00015| +
-| Ring Sensor |{{https://​www.interlinkelectronics.com/​datasheets/​Datasheet_RingSensor.pdf|Interlink Ring Sensor}}|40-24131| +
-| Linear+Force Sensor |{{:​neonking:​34-00022_rev_a.pdf|Interlink linear+force sensor}}|34-00022| +
-| Linear Touch Sensor |{{https://​cdn-shop.adafruit.com/​datasheets/​SoftPot-Datasheet.pdf|SpectraSymbol SoftPot}}| SP-L-0100-103-ST| +
-|Circular Touch Sensor|{{https://​cdn-shop.adafruit.com/​datasheets/​SoftPot-Datasheet.pdf|SpectraSymbol SoftPot}}|SP-R-0046-103-ST| +
- +
-====Buy Places==== +
- +
-  * **[[http://​www.mouser.com/​|Mouser]]** +
-  * **[[http://​www.buydisplay.com/​|Buydisplay]]** +
- +
-  * [[http://​www.digikey.fr/​product-search/​fr/​sensors-transducers/​force-sensors/​1966743?​k=&​pkeyword=&​v=1027&​FV=fff4001e%2Cfff80297&​mnonly=0&​newproducts=0&​ColumnSort=0&​page=1&​quantity=0&​ptm=0&​fid=0&​pageSize=25| Interlink Force Sensors @ Digikey]] +
-  * [[http://​www.robotshop.com/​eu/​fr/​capteur-tactile-circulaire.html| Interlink Ring Sensor @ Roboshop]] +
-  * [[https://​www.adafruit.com/​products/​1069|SpectraSymbol Circular Tactile Sensor @Adafruit]] +
-  * [[https://​www.adafruit.com/​products/​178|SpectraSymbol Linear Tactile Sensor @Adafruit]] +
- +
- +
-===== Software / Firmware ===== +
- +
-  * **[[tools#​juce_library|JUCE Ressources]]** +
- +
-A **GUI** will be developped with JUCE Library to make your **MIDI mapping** upon your custom control interface and make your **custom infos display on OLED / CLCDs / LEDs Matrixes**. Upon a list of **Pre-made functions**,​you would be able to connect a **MIDI mapping** to Controller / Sequencer / Other MIDIbox apps functions into the JUCE GUI +
- +
-<wrap tip> **//​TODO://​**Make a inkscape sketch For the JUCE GUI then remake it with **Projucer**</​wrap>​ +
  
mb-modulbox-ng.txt · Last modified: 2016/10/08 12:53 by psykhaze