User Tools

Site Tools


mb-sidr8tr:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
mb-sidr8tr:start [2011/10/14 13:30]
m00dawg
mb-sidr8tr:start [2011/11/12 17:42]
m00dawg
Line 63: Line 63:
 The downside is the firmware will need to be modified and the order that the components are wired matters. Thus, for folks only wanting to use some of the boards in their own designs, they may have to make their own firmware. It's very very easy to do, however - it's all well documented in the MBSID source code. The downside is the firmware will need to be modified and the order that the components are wired matters. Thus, for folks only wanting to use some of the boards in their own designs, they may have to make their own firmware. It's very very easy to do, however - it's all well documented in the MBSID source code.
  
-==== LED Matrix ​====+==== Control Surface Header Pinout ​====
  
-This is a proposed layout for an LED matrix board to be used coupled with the above panel design. While other boards ​can likely be made from home using various methods, it might be wise to have this one printed. Note that this design currently has the mounting holes up higher than the current design of the front panel. The mounting holes were moved down on the panel so the design was more uniformModify per your needs!+Note: Headers will be mounted on the bottom of most boards ​such that the cabling will be behind ​the control surface parts.
  
-{{:​mb-sidr8tr:​8x8-led_matrix-rev6-board.png?​320}} +^ J9 ^ J8 ^ 
-{{:​mb-sidr8tr:​8x8-led-matrix-sch-rev6.png?​320}} +^ DIN ^ DOUT ^ 
-{{:​mb-sidr8tr:​8x8-led-matrix-rev6.zip|Eagle}}+GND | NC | 
 +| 5V  | NC | 
 +| SI  | SO | 
 +| SC  | SC | 
 +| RC  | RC |
  
-A [[mb-sidr8tr:​mb-mtrx_bulk|Bulk Order]] is being organized is you are interested in obtaining your own board at a better price than doing a single board one-off. If you want to know more about the latest happenings, check out [[http://​midibox.org/​forums/​topic/​15425-feedback-for-an-led-matrix-board/​page__pid__136259|this]] forum post.+Equivalent Symbols
  
-=== Parts List ===+J9: 
 +74HC165
  
-Part Description  ​Mouser ​Farnell ​+Pin ucapps ​Eagle Chip Pin 
-S1-S16 ​6mm x 6mm Tactile Switch ​| | | +SI QR QH 
-D1-D16 ​SMD Switching Diode [[http://​www.mouser.com/​ProductDetail/​Vishay-Semiconductors/​1N4148W-V-GS08/?​qs=sGAEpiMZZMutXGli8Ay4kLkmINSaB0itW2gxFjPgeXA%3d|1N4148W-V-GS08]] | [[http://​de.farnell.com/​jsp/​displayProduct.jsp?​sku=1469425&​CMP=KNC-GDE-FDE-GEN-SKU-G12&​s_kwcid=TC|13114|1n4148w-v-gs08||S|e|5480397067|1469425]] ​+SC CLK CLK 
-LED1-LED64 ​3mm LED | | | +RC LD SH/LD |
-| JD5, JD6, JD8 | SIL Pin Header ​| | |+
  
-Note that other SMD diodes may worksuch as Mini-MELF.+J8: 
 +74HC595 
 + 
 +^ Pin ^ ucapps ^ Eagle ^ Chip Pin ^ 
 +| SO | SER | SER | 14  | 
 +| SC | SCLK | SCK | 11 | 
 +| RC | RCLK | RCK | 12 | 
 + 
 +==== LED Matrix ==== 
 + 
 +I have designed this a few times and finally settled on using a baseboard ​that houses the LEDs and buttonsand using a daughtboard to house the shift-registers and things. This should also allow the MB-6582 button matrix via another daughter-card.  
 + 
 +{{:​mb-sidr8tr:​8x8-led-matrix-rev7-brd.png?​320}} 
 +{{:​mb-sidr8tr:​8x8-led_matrix-daughter-rev1-board.png?​320}} 
 + 
 +{{:​mb-sidr8tr:​led-matrix-rev7.zip|Eagle Files}} 
 + 
 + 
 +A [[mb-sidr8tr:​mb-mtrx_bulk|Bulk Order]] is being organized is you are interested in obtaining your own board at a better price than doing a single board one-off. If you want to know more about the latest happenings, check out [[http://​midibox.org/​forums/​topic/​15425-feedback-for-an-led-matrix-board/​page__pid__136259|this]] forum post.
  
 ==== AudioBus ==== ==== AudioBus ====
mb-sidr8tr/start.txt · Last modified: 2020/12/08 17:19 by m00dawg