Differences

This shows you the differences between two versions of the page.

--- midibox64e [2006/03/16 19:16]
smashtv created
+++ midibox64e [2011/09/17 00:02] (current)
dougster
@@ Line 1: / Line 1: @@
-MIDIbox64E is a MIOS based MIDI controller
+\\
+MIDIBox64E is a midi controlled based on [[MBHP]]/[[MIOS]]
-See also http://www.ucapps.de/midibox16e.html
+  * [[http://www.ucapps.de/midibox16e.html|MIDIbox 64E]] <sup>uCApps</sup>
+  * [[http://www.ucapps.de/midibox64e_tutorial.html|MIDIbox 64E Tutorial]] <sup>uCApps</sup>
+  * [[MIDIbox64(E) Patchmode]]
+  * [[Meta Events]]
+  * [[Button Overlay]]
+\\
+====== DIN register allocation =====
+Question from Dan aka Digineural:
+----
+I understand that the following is setting shift registers 5-8 to be used for encoders 1-16.
+MIOS_ENC_PIN_TABLE
+   ;; encoders 1-16
+   ;;        SR  Pin  Mode
+   ENC_ENTRY  5,  0,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 1
+   ENC_ENTRY  5,  2,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 2
+   ENC_ENTRY  5,  4,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 3
+   ENC_ENTRY  5,  6,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 4
+   ENC_ENTRY  6,  0,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 5
+   ENC_ENTRY  6,  2,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 6
+   ENC_ENTRY  6,  4,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 7
+   ENC_ENTRY  6,  6,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 8
+   ENC_ENTRY  7,  0,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 9
+   ENC_ENTRY  7,  2,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 10
+   ENC_ENTRY  7,  4,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 11
+   ENC_ENTRY  7,  6,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 12
+   ENC_ENTRY  8,  0,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 13
+   ENC_ENTRY  8,  2,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 14
+   ENC_ENTRY  8,  4,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 15
+   ENC_ENTRY  8,  6,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 16
+However I'm not quite sure what is being defined here
+#define DEFAULT_DIN_SR_PIN_01_08   2\\
+#define DEFAULT_DIN_SR_PIN_09_16   3\\
+#define DEFAULT_DIN_SR_PIN_17_24   1\\
+#define DEFAULT_DIN_SR_PIN_25_32   4\\
+#define DEFAULT_DIN_SR_PIN_33_40   8\\
+#define DEFAULT_DIN_SR_PIN_41_48   10\\
+#define DEFAULT_DIN_SR_PIN_49_56   11\\
+#define DEFAULT_DIN_SR_PIN_57_64   12\\
+----
+Answer:
+MB64E supports up to 64 button functions, and they are assiged to 8 shift registers. With the DEFAULT_DIN_SR_* settings you can change the mapping. This is important, if the appr. shift registers are already allocated by encoders (defined in mios_tables.inc) - if this is the case, change the DEFAULT_DIN_SR_* values to unused shift register numbers.
+\\
+====== Forum FAQ ======
+Be sure to make a search of the forum; \\
+these are some useful infos from old threads:
+  * http://www.midibox.org/forum/index.php?topic=6395.0 Testing AIN Board
+  * http://www.midibox.org/forum/index.php?topic=7149.0 Mapping Buttons to Midi Ch
+  * http://www.midibox.org/forum/index.php?topic=7104.0 Enabling Pots
+  * http://www.midibox.org/forum/index.php?topic=6938.0 MB64E Encoders

MIDIbox

User Tools

Site Tools

Differences

Page Tools