User Tools

Site Tools


mididoc:midibox_cv_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mididoc:midibox_cv_v2 [2016/06/26 20:51]
psykhaze
mididoc:midibox_cv_v2 [2016/06/27 11:15] (current)
psykhaze [MBHP Modules Required]
Line 3: Line 3:
 ===== Introduction ===== ===== Introduction =====
  
-MIDIbox CV V2 is the successor of MIDIbox ​CV V1 with focus on digital, high-resolution modulation of CV outputs and an enhanced control surface.+MIDIbox CV V2 is the successor of [[:​midibox_cv_v1|MB-CV]] V1 with focus on digital, high-resolution modulation of CV outputs and an enhanced control surface.
  
 [[http://​www.ucapps.de/​midibox_cv_v2.html|Official Ucapps Page]] [[http://​www.ucapps.de/​midibox_cv_v2.html|Official Ucapps Page]]
Line 25: Line 25:
 ===== Control Voltages Features ===== ===== Control Voltages Features =====
  
-  * Typically 12bit outputs with common MBHP based [[AOUT Module]]. Internally working with 16bit+  * Typically 12bit outputs with common MBHP based [[:AOUT Module]]. Internally working with 16bit
   * Volt/Octave (positive and negative) and Herz/Volt characteristic   * Volt/Octave (positive and negative) and Herz/Volt characteristic
   * Configurable slew rate to "​smooth"​ the output curve (e.g. if controlled only by 7bit CCs)   * Configurable slew rate to "​smooth"​ the output curve (e.g. if controlled only by 7bit CCs)
Line 55: Line 55:
   * [[:Din Module]]   * [[:Din Module]]
   * [[:Dout Module]]   * [[:Dout Module]]
-  * [[:SCS Module]]+  * [[:SCS Module]] ​// (Optional)//​
 \\ \\
  
Line 69: Line 69:
  
 ==== Led Rings Encoders ==== ==== Led Rings Encoders ====
 +
 +{{ :​mididoc:​neonking:​midibox_cv2_lre8x2.jpg?​direct&​500 |}}
  
 Up to 32 free assignable rotary encoder functions with support for LED rings are available. The encoders have to be connected to a MBHP_DIN module, the LED rings to four shift registers of a MBHP_DOUT module. Up to 32 free assignable rotary encoder functions with support for LED rings are available. The encoders have to be connected to a MBHP_DIN module, the LED rings to four shift registers of a MBHP_DOUT module.
  
-**[[:​mb-lre8x2cs_pcb|LRE8x2]] **+**[[:​mb-lre8x2cs_pcb|LRE8x2 ​Page]] **
mididoc/midibox_cv_v2.1466974284.txt.gz ยท Last modified: 2016/06/26 20:51 by psykhaze