User Tools

Site Tools


mididoc:midibox_kb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mididoc:midibox_kb [2016/03/24 10:15]
fantomxr
mididoc:midibox_kb [2016/03/24 10:17] (current)
fantomxr
Line 15: Line 15:
 When you are finished enter //set kb <1|2> calibration off// and play the keybed with your favorite sound. You can take a view on the measured delays by entering //kb1 delays// in the terminal. ​ When you are finished enter //set kb <1|2> calibration off// and play the keybed with your favorite sound. You can take a view on the measured delays by entering //kb1 delays// in the terminal. ​
  
-For MB_NG: If it works like you expected enter //save <​filename>​//​.</​br>​ +For **MB_NG**: If it works like you expected enter //save <​filename>//​.
-For MB_KB: If it works like you expected enter //store//. +
  
-For MB_NGYou will notice that there will be a new file on the sd-card called <​filename>​.NGK. This file contains the slowest-delays for every single key.  Here you can adjust every single key by adjusting the values. The keys are numbered where 0 is the lowest note on an 88-key keyboard (A).+For **MB_KB**If it works like you expected enter //store//
  
-For MB_KBIf you would like to change ​the slowest-delay of a single key simply enter //set kb <1|2> key_calibration_value <key> <​value>//​+For **MB_NG**You will notice that there will be a new file on the sd-card called <​filename>​.NGK. This file contains ​the slowest-delays. ​ Here you can adjust every single key by changing the values. The keys are numbered where 0 is the lowest note on an 88-key keyboard (A).
  
 +For **MB_KB**: If you would like to change the slowest-delay of a single key simply enter //set kb <1|2> key_calibration_value <key> <​value>//​
  
-With the calibration-mode another change was made. You still have the slowest_delay-parameter in MBKB and MBNG. This value now changes the sensitivity per mille. A value of 1000 uses the delays in the .NGK-file = no change. A value of 2000 would double the measured delays - a value of 500 halves the measured delays.+ 
 +With the calibration-mode another change was made. You still have the //slowest_delay//-parameter in MBKB and MBNG. This value now changes the sensitivity per mille. A value of 1000 uses the delays in the .NGK-file = no change. A value of 2000 would double the measured delays - a value of 500 halves the measured delays.
mididoc/midibox_kb.txt · Last modified: 2016/03/24 10:17 by fantomxr