mididocs:seq:hardwareconfig
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
mididocs:seq:hardwareconfig [2014/09/18 01:32] borfo [Adding Modules to Your SEQ] |
mididocs:seq:hardwareconfig [2014/09/18 20:33] (current) borfo |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| **[[mididocs:index|MIDIdocs]]** | **[[mididocs:index|MIDIdocs]]** | ||
| ======The MBSEQ_HW.V4 File====== | ======The MBSEQ_HW.V4 File====== | ||
| - | [[|Forum Discussion Thread]] - for comments, corrections, or questions about this article | + | [[http://midibox.org/forums/topic/19043-mididocs-seqv4-the-mbseq-hwv4-file-discussion-thread/|Forum Discussion Thread]] - for comments, corrections, or questions about this article |
| This file contains configuration information about your SEQ's hardware - button, LED, and encoder assignments, some low level settings, etc. This file has to be in the root of your SD Card in order for the Wilba Frontpanel to work, because without this file, the SEQ core won't know anything about the buttons and LEDS on your frontpanel. | This file contains configuration information about your SEQ's hardware - button, LED, and encoder assignments, some low level settings, etc. This file has to be in the root of your SD Card in order for the Wilba Frontpanel to work, because without this file, the SEQ core won't know anything about the buttons and LEDS on your frontpanel. | ||
| Line 11: | Line 11: | ||
| ====Config File for the Wilba Frontpanel==== | ====Config File for the Wilba Frontpanel==== | ||
| If you've just built a MIDIbox and all you want is for your Wilba Frontpanel to work, then you really don't need to understand this file. [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4|Here is a standard MBSEQ_HW.V4 file]] for the Wilba Frontpanel. Just make sure that file exists in your SD Card root. | If you've just built a MIDIbox and all you want is for your Wilba Frontpanel to work, then you really don't need to understand this file. [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4|Here is a standard MBSEQ_HW.V4 file]] for the Wilba Frontpanel. Just make sure that file exists in your SD Card root. | ||
| + | |||
| + | ====Reassigning Buttons==== | ||
| + | If you like, you can completely reconfigure your button assignments. If you read through the MBSEQ_HW.V4 file, you'll see that there are a few button assignments available that are not used on the Wilba Frontpanel... If you're interested in having any of those buttons available on your control surface, you can replace a button assignment that you don't need. How to do this should be fairly obvious to you as you read through the MBSEQ_HW.V4 file. If you screw it up somehow, you can just revert to the original MBSEQ_HW.V4 file, no harm done. | ||
| + | |||
| ====Example MBSEQ_HW.V4 files==== | ====Example MBSEQ_HW.V4 files==== | ||
| Line 21: | Line 25: | ||
| ====Adding Modules to Your SEQ==== | ====Adding Modules to Your SEQ==== | ||
| - | Some modules, like the TPD (Track Position Display) module, the AOUT_NG module (provides CV outs), and hardware Button LED Matrices (BLMs) require amendments to the MBSEQ_HW.V4 file. To learn a bit about how this works, see, for example, the configuration documentation on [[http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb&s[]=mbseq&s[]=hw&s[]=v4#config|this page]] about the [[http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb&s[]=mbseq&s[]=hw&s[]=v4|TPD module]]. | + | Some modules, like the [[http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb&s[]=mbseq&s[]=hw&s[]=v4|TPD (Track Position Display) module]], the [[http://www.midibox.org/dokuwiki/doku.php?id=aout_ng|AOUT_NG module]] (provides CV outs), and the hardware [[http://www.ucapps.de/midibox_seq_manual_blm.html|Button LED Matrix (BLM)]] require amendments to the MBSEQ_HW.V4 file. To learn a bit about how this works, see, for example, the configuration documentation on [[http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb&s[]=mbseq&s[]=hw&s[]=v4#config|this page]] about the [[http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb&s[]=mbseq&s[]=hw&s[]=v4|TPD module]]. |
| + | |||
| + | Some modules, like the QUAD_MIDI_IIC, are pretty much "plug and play" and don't require any editing of the MBSEQ_HW.V4 file. Generally speaking, you'll need to edit the MBSEQ_HW.V4 whenever you're adding a module that has buttons, encoders, or LEDs that you want to assign. | ||
mididocs/seq/hardwareconfig.1411003956.txt.gz · Last modified: 2014/09/18 01:32 by borfo
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
