output
Search
You can find the results of your search below.
Results
- home:mbhp:module:core: 30 Hits
- ^ J1 | Connection to the power supply. Either the output of a 7V-10V transformer, or a wall adapter can be... ty has not to be taken into account. |
^ J2 | +5V output, can be used to supply other core modules in a mu... some application which use this as digital in- or output.|
^ J6 | J6-Interface to the AIN module for MIDIb... in|
| RA4 | K | J4:SD | 6 | Input / Output | IIC data pin SD, external 1k pull-up, can be
- mios_pin_list: 27 Hits
- in|
| RA4 | K | J4:SD | 6 | Input / Output | IIC data pin SD, external 1k pull-up, can be ... ed|
| RC0 | B | J6:RC / J7:RC | 15 | Output | used to address the AIN multiplexers or the M... . |
| RC1 | B | J6:SC / J7:SC | 16 | Output | used to address the AIN multiplexers or the M... routine. |
| RC2 | D | J7:SO | 18 | Output | used as serial output to the MF module, drive
- home:project:midi_mapper: 26 Hits
- oute input channels of a single hardware input to output channels of a single hardware output in any way you want. The device's user interface is designed to allo... * One MIDI hardware-input
* One MIDI hardware-output
* Four "screen" - buttons (preset / bus / input / output)
* 16 "value-buttons"
* 16 presets
* 16 bus
- midibox_audiomatrix: 25 Hits
- ) that has the option of routing any input to any output digitally. No hardware switches or anything, just... lf using a display would also be sufficient. Each output should just have individual settings for which in... ing any number of the input signals to one single output. But the input should stay available to other out... moned/combined signal doesn't overload the chosen output.
Making it even better is to have the option of
- installing_gputils_and_sdcc_on_fedora_core_5: 21 Hits
- clockbox_v1_0.zip
cd clockbox_v1_0
make
</code>
Output should look like:
========================
<code... -I mios_wrapper mios_wrapper/mios_wrapper.asm -o _output/mios_wrapper.o
sdcc -S -mpic16 -p18F452 --fstack ... =2 -pleave-reset-vector -DDEBUG_MODE=0 main.c -o _output/main.asm
Processor: 18F452
perl tools/fixasm.pl _output/main.asm
gpasm -c _output/main.asm -o _output/mai
- mididocs:seq:beginners_guide:start: 19 Hits
- track sends out its data, first, into a physical output port, and second, on one MIDI channel in the chos... cer, instead of routing it directly to a physical output port.
The MIDI configuration page allows you set... ncoming data and forward it to the active track's output port and MIDI channel. //This is done regardless ... is 'on' on the Jam page, on to the active track's output port and MIDI channel.//\\
>>>//If your MIDI cont
- mbhp_genesis: 16 Hits
- am of J7 on one of the boards, and take the audio output from J8 on that board. (This is assuming you want... nnect a 20k or 50k potentiometer between the Left output and Right output (R18:2 and R19:2) with its wiper connected to +2.5V (R18:1).
==== J8: OUT ====
Analog audio output from all the modules together. Low-impedance outp
- midibox_pokey: 14 Hits
- iders 2 and 4 can alternately be clocked with the output of dividers 1 and 3 by setting AUDCTL bits 4 and ... mpled by the "divide-by-N" frequency divider, the output obviously cannot change faster than the sampling ... ng only the low-frequency noise to pass.
* The output of the noise-control circuit described above cons... the "divide-by-N" counter (low pass clock). This output can be routed through a high-pass filter if desir
- midibox_tia: 14 Hits
- nd WR# line.\\
<wrap important>Divided by 3 Clock output 00 must be connected to input 02.</wrap>\\
</WRAP... ocks a divide by three counter on this chip whose output (1.19 Mhz) is buffered to drive an output pad called 00. This pad provides the input phase zero clock to ... _circuit.gif?600|Synthesis Schematic}}
=== Audio Output: ===
A few references of TIA have a separated ou
- mb_2069: 13 Hits
- ut\\
**2 Outputs**:
* **2P Out** VCF -12dB/Oct Output\\
* **4P Out** VCF -24dB/Oct Output\\
and **5 CV Inputs**:
* **SIG1 Level**\\
* **SIG2 Level**\... sonance**\\
The Independent VCA Has is own input/output and 2 CV inputs.\\
First is linear CV.\\
The othe... cuit is applied to the VCA In. \\
The VCF 4 Poles output is the Output of the filter stage. \\
{{ :anticha
- wickedblade: 10 Hits
- loops, the unit will also provide an input and an output buffer (based on Jack Orman's), which can be disa... incux disposition, with the input on top, and the output on the bottom, slightly displaced on the side (sa... ight to left, when looking from behind):
* main output jack ~20mm
* MIDI OUT and IN, on over the other... puts for these anyway, because I may use separate output registers for the relays, which may help reduce n
- wilba_mb_6582_base_pcb_construction_guide: 9 Hits
- dge at J72 between pin 2 and 3. (This connects V1 output pin to 9v supply lines).
Solder a bridge at J73 ... dge at J72 between pin 1 and 2. (This connects V1 output pin to 14v supply lines, to go into V2 and V3).
... ly at J4:pin3 to J74:pin2, then connect the 5v DC output at J74:pin1 to J4:pin2. //In theory,// this will ... xpansion port usage):
* J70 (for passive mixed output, to connect to headphone jack)
* J2 (for power
- midibox_quad_genesis: 8 Hits
- ed with little skills and tools.
* Stereo audio output connection of desired type
* Mono audio input c... l components can easily get into the analog audio output.
Because of these considerations, and wanting t... e rectifier I made from 1N4007 diodes, and the DC output went to a 3300uF electrolytic capacitor. This is ... ent for a 7805 linear regulator. It can push 1.5A output and has an input range of 7-36V, meaning that any
- apparat_20_construction_blog: 8 Hits
- movwf ADCON1
;; Initialize J5 (PORTA 0..3,5 output, PORTE 0..2 input)
bcf TRISA, 0 ; Pin RA.0 = output
bcf TRISA, 1 ; Pin RA.1 = output
bcf TRISA, 2 ; Pin RA.2 = output
bcf TRISA, 3 ; Pin RA.3 = output
bcf TRISA, 5 ; Pin RA.5 = o
- wilba_mb_6582_psuopte: 8 Hits
- pic18f4685_8bit_lcd_driver: 7 Hits
- midibox_sid_faq: 7 Hits
- protodeck: 6 Hits
- home:mbhp:module:aout_ng: 6 Hits
- midiboxfx_-_midifiying_analog_gear: 6 Hits
- aout_ng: 6 Hits
- easy_cv: 6 Hits
- pga:buildoutbrd: 6 Hits
- electronics_basics: 5 Hits
- home:about:mbhp_acronyms: 5 Hits
- i_o: 5 Hits
- mididoc:midibox_cv_v2: 5 Hits
- wilba_midibox_rc: 5 Hits
- acsensorizer_02: 5 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 4 Hits
- opamp: 4 Hits
- wilba_mb_6582_prototype: 4 Hits
- fet: 4 Hits
- mbhp_acronyms: 4 Hits
- midibox_cv_v1: 4 Hits
- flo: 4 Hits
- korg_wavedrum_midification: 4 Hits
- acsensorizer_04: 4 Hits
- pga:buildchanbrd: 4 Hits
- midibox_sid_v1_manual: 3 Hits
- simple_cv: 3 Hits
- home:project:midibox_sid_v1_manual: 3 Hits
- northernlightx: 3 Hits
- c_from_first_principles: 3 Hits
- midibox_ay_ym_v2: 3 Hits
- home:project:midibox_sid:v1_manual: 3 Hits
- mbqg_fp: 3 Hits
- home:mbhp:module:din: 3 Hits
- ssm2164_getting_started: 3 Hits
- mc_protocol_mappings: 3 Hits
- fnp-sid: 3 Hits
- hardsid.dll: 3 Hits
- wiki:syntax: 3 Hits
- wilba_mb_6582: 3 Hits
- midibox_ay_3_8912: 3 Hits
- mbhp: 3 Hits
- bipolar_12v_psu: 3 Hits
- pedal_box: 2 Hits
- mb_matrix: 2 Hits
- monostable: 2 Hits
- linear: 2 Hits
- windows_toolchain_notepadplus: 2 Hits
- exclusive_or: 2 Hits
- midiboxmixerhardware: 2 Hits
- ultracore: 2 Hits
- acsim_mios_c: 2 Hits
- acsim_console_c: 2 Hits
- eclipse: 2 Hits
- changing_dout_pins: 2 Hits
- transponder: 2 Hits
- pga:stackboards: 2 Hits
- speakjet_control_overview: 2 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 2 Hits
- usb_gm5_module: 2 Hits
- pedal_box:manual: 2 Hits
- output_modules: 2 Hits
- midibox_sd_card_sample_player: 2 Hits
- core_module: 2 Hits
- msq-cc-bcr: 2 Hits
- ain_4: 2 Hits
- wcore_usb: 2 Hits
- ssm2044_pcb: 2 Hits
- midio128: 2 Hits
- mb_visual_metronome: 2 Hits
- msq-cc-lre: 2 Hits
- introduction_to_ucapps.de: 2 Hits
- cv1: 2 Hits
- m16: 2 Hits
- msq-cc-lre-v2: 2 Hits
- pga:inputchoices: 1 Hits
- trsequencer: 1 Hits
- aout_4: 1 Hits
- dictionary:and: 1 Hits
- pga:choices: 1 Hits
- mb808: 1 Hits
- elo: 1 Hits
- mididocs:seq:blm16x16_build_guide: 1 Hits
- lucem: 1 Hits
- mios_faq: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- using_pic18f4620: 1 Hits
- dictionary:bios: 1 Hits
- dictionary:amp: 1 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 1 Hits
- windows_toolchain_core: 1 Hits
- gm5x5x5: 1 Hits
- cs1: 1 Hits
- wiki:test_page: 1 Hits
- sync_4_newbies: 1 Hits
- control_board: 1 Hits
- midiboxmixer: 1 Hits
- triggermatrix5: 1 Hits
- windows_mios32_toolchain_core: 1 Hits
- midiboxdmx: 1 Hits
- c_tips_and_tricks_for_pic_programming: 1 Hits
- tm5-gate-board: 1 Hits
- tm5-dindoutgate: 1 Hits
- tpd_pcb: 1 Hits
- midibox_seq_quick_reference: 1 Hits
- dictionary:astable: 1 Hits
- clock2audio2clock: 1 Hits
- dipcoref4: 1 Hits
- cc-looper: 1 Hits
- mios_c_simulator_-_debugger: 1 Hits
- kongatrigga: 1 Hits
- mb_olre16: 1 Hits
- home:skills:troubleshooting:firmware: 1 Hits
- eusart_bug: 1 Hits
- wilba_mb_6582_parts_list: 1 Hits
- make_encoders_out_of_your_mouse: 1 Hits
- ainser64_module: 1 Hits
- ainser8_module: 1 Hits
- harmonic: 1 Hits
- midimasterclock: 1 Hits
- acsim_toolbox_c: 1 Hits
- parts_faq: 1 Hits
- differential_amplifier: 1 Hits
- transistor: 1 Hits
- feedback: 1 Hits
- audio_synthesis_integrated_circuit: 1 Hits
- forum_highlights_sid: 1 Hits
- fpga: 1 Hits
- installing_gputils_and_sdcc_on_osx: 1 Hits
- home:project:mb808: 1 Hits
- kernel: 1 Hits
- encyclopedia_entries: 1 Hits
- multivibrator: 1 Hits
- negative_feedback: 1 Hits
- midibox_seq: 1 Hits
- mbuntu:mbuntu: 1 Hits
- pcmcia: 1 Hits
- perl: 1 Hits
- pio: 1 Hits
- port: 1 Hits
- cutoff_frequency: 1 Hits
- tos_-_a_tds_controller_blog: 1 Hits
- howto_create_a_pcb_english_german: 1 Hits
- comparator: 1 Hits
- proportional_amplifier: 1 Hits
- stm32f4_module: 1 Hits
- ltc_module: 1 Hits
- dout_module: 1 Hits
- din_module: 1 Hits
- subtractor: 1 Hits
- pga:compile: 1 Hits
- syntax: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- direct_coupled_amplifier: 1 Hits
- home:software:linux:mbuntu: 1 Hits
- acsim_toolbox_h: 1 Hits
- arumblack: 1 Hits
- home:skills:etching_pcbs: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- dcb: 1 Hits
- led: 1 Hits
- arkade: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits
- cascade: 1 Hits
- inverter: 1 Hits
output.txt ยท Last modified: 2011/11/29 16:57 by smashtv