User Tools

Site Tools


pedal_box

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
pedal_box [2010/04/13 07:40]
durisian
pedal_box [2014/01/19 10:10] (current)
shuriken
Line 54: Line 54:
   * **Expression Pedals**   * **Expression Pedals**
     * Up to 8 Expression Pedals or Pedal inputs (CV / 10k pot)     * Up to 8 Expression Pedals or Pedal inputs (CV / 10k pot)
-    * Individual option for pedals to follow program change messages ​changing the midi messages sent+    * Individual option for pedals to be '​dynamic'​ by changing the midi messages sent based on the Rig COntrol Patch Change
     * Value scaled between pre-defined min and max values (can also be different for each program change)     * Value scaled between pre-defined min and max values (can also be different for each program change)
 +    * A MIDI CC can be configured to act exactly as if it were connected to an analogue in (The 8 limit still applies)
   * **LCD Display**   * **LCD Display**
     * Named Program Changes     * Named Program Changes
Line 81: Line 82:
     * Up to 128 patches can be listed in any order     * Up to 128 patches can be listed in any order
     * Cue Next / Cue Previous can be done from any button or a MIDI IN event     * Cue Next / Cue Previous can be done from any button or a MIDI IN event
 +  * **PedalSwap**
 +    * Allows dynamic pedals to change there midi settings without utilizing Rig Control
   * PC Editor files allows easy...ish customization for different MIDI devices. ​   * PC Editor files allows easy...ish customization for different MIDI devices. ​
   * Settings configurable from box. (this is a very slow process but can you help you out in pinch, it's far quicker to use the PC Editor). \\    * Settings configurable from box. (this is a very slow process but can you help you out in pinch, it's far quicker to use the PC Editor). \\ 
Line 104: Line 107:
 ^Gig Control Via MIDI  |  Y  |  Y  | ^Gig Control Via MIDI  |  Y  |  Y  |
 ^Gig Control Via DIN   ​| ​ N  |  Y  | ^Gig Control Via DIN   ​| ​ N  |  Y  |
 +^PedalSwap Via MIDI    |  Y  |  Y  |
 +^PedalSwap Via DIN     ​| ​ N  |  Y  |
 ^Setup Via MIDI        |  Y  |  Y  | ^Setup Via MIDI        |  Y  |  Y  |
 ^Setup Via DIN         ​| ​ N  |  Y  | ^Setup Via DIN         ​| ​ N  |  Y  |
Line 161: Line 166:
 </​box>​ </​box>​
  
 + ​\\ ​
 + ​\\ ​
 + ​\\ ​
 + ​\\ ​
 + ​\\ ​
 + \\
 + ​\\ ​
 + ​\\ ​
 + \\
 + ​\\ ​
 + ​\\ ​
 + \\
 + ​\\ ​
 + ​\\ ​
 + \\
 + ​\\ ​
 + ​\\ ​
 + \\
  
  
Line 167: Line 190:
  
 ======Manual====== ======Manual======
-Pedal Box / Pedal Board [[pedal_box:manual]]+[[http://​svnmios.midibox.org/​filedetails.php?​repname=svn.mios&​path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]
  
-PC Editor Manual ​[[pedal_box:pc_editor_manual|manual]]+Help can be found in the [[http://​midibox.org/​forums/​topic/​9081-the-pedal-box-and-pedal-board-thread ​Pedal Box forum thread ​]]
  
-Help can be found in the [[http://​www.midibox.org/​forum/​index.php/​topic,​9770.30.html | Pedal Box forum thread ]]+ \\  
 + ​\\ ​
  
  
Line 388: Line 412:
 <box 46% left round bluedark|Device Bankstick Downloads>​ <box 46% left round bluedark|Device Bankstick Downloads>​
  
-[[http://​svnmios.midibox.org/​filedetails.php?​repname=svn.mios&​path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2FDevice_Config_Files%2FV-Amp%2FV-Amp.zip|Behringer V-Amp Series]] +{{:mcrozier:v-amp.zip|Behringer V-Amp Series}} 
  
 </​box>​ \\  </​box>​ \\ 
  
 <box 46% left round|PC Editor> ​ <box 46% left round|PC Editor> ​
-[[http://​svnmios.midibox.org/​filedetails.php?​repname=svn.mios&​path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Feditor%2Fv2%2FPBEditor2.zip|Pedal Board Editor 2 v1.0]]+{{:mcrozier:​pbeditor2.zip|Pedal Board Editor 2 v1.0}} \\  
 +Please note the editor requires a minimum of WinXP with .Net 3.5 \\ 
  
 </​box>​ </​box>​
- +<box 98% round|Docs>​ 
-[[http://​svnmios.midibox.org/​filedetails.php?​repname=svn.mios&​path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]+{{:mcrozier:​pb_manual.pdf|The Complete Usage Manual}}</​box>​
 ---- ----
  
Line 426: Line 451:
  
  
-Please report bugs in the [[http://www.midibox.org/​forum/index.php/topic,​9770.30.html ​| Pedal Box forum thread ]]+Please report bugs in the [[http://​midibox.org/​forums/topic/9081-the-pedal-box-and-pedal-board-thread ​| Pedal Box forum thread ]]
  
  
Line 585: Line 610:
 The shift register of the 1st digit (the one's display) must be defined in pbx_config.h \\  The shift register of the 1st digit (the one's display) must be defined in pbx_config.h \\ 
 The second digit (ten'​s) will be automatically assigned to the next shift register. The second digit (ten'​s) will be automatically assigned to the next shift register.
 +
 +If only 1 digit is used, and bank goes higher than 9. The dot will light up to let you know that '​0'​ is actually 10, '​1'​ is actually 11, etc \\ 
  
 In place of LED digits. A 2x20 LCD Display can be used (instead of 2x16). The last 4 charcters of each line are used for bank display. This will only happen when DIGITS_CONNECTED = 0 in pbx_config.h. In place of LED digits. A 2x20 LCD Display can be used (instead of 2x16). The last 4 charcters of each line are used for bank display. This will only happen when DIGITS_CONNECTED = 0 in pbx_config.h.
Line 613: Line 640:
 ==== Connection Overview ==== ==== Connection Overview ====
 {{http://​www.durisian.com/​midibox/​PB/​images/​pbd_din_dout_connections.jpg}} ​ {{http://​www.durisian.com/​midibox/​PB/​images/​pbd_din_dout_connections.jpg}} ​
 +
 +**Please Note:** Default connections have changed since 2.6. The default has only one digit connected to SR 5. With bank and PedalSwap footswitches and LED's attched to SR 4
 +
  
 Pedal Board Test Bench \\  Pedal Board Test Bench \\ 
Line 625: Line 655:
 I only built Pedal Box, so I use the Behringer FCV100 Foot Pedal in CV mode. But here's some links that came up on the forum. I only built Pedal Box, so I use the Behringer FCV100 Foot Pedal in CV mode. But here's some links that came up on the forum.
  
-  * [[http://​www.banzaieffects.com/​Pushbutton-Footswitches-Momentary-c-333.html ​| Banzai Effects]] stock a good range of momentary footswitches - perfect for this project+  * [[http://​www.banzaimusic.com/​Pushbutton-Footswitches-Momentary | Banzai Effects]] stock a good range of momentary footswitches - perfect for this project
   * [[http://​www.smallbearelec.com/​|Small Bear Electronics]] Specializes in DIY guitar sound effects   * [[http://​www.smallbearelec.com/​|Small Bear Electronics]] Specializes in DIY guitar sound effects
   * stryd_one offered this google search for momentary footswitches. [[http://​www.google.com.au/​search?​safe=off&​q=momentary+SPST+footswitch]]   * stryd_one offered this google search for momentary footswitches. [[http://​www.google.com.au/​search?​safe=off&​q=momentary+SPST+footswitch]]
Line 656: Line 686:
 {{mcrozier:​pedal_board_max.jpg}} ​ \\  {{mcrozier:​pedal_board_max.jpg}} ​ \\ 
 You know you want to build it! You know you want to build it!
- 
- 
- 
pedal_box.1271144401.txt.gz · Last modified: 2010/04/13 07:40 by durisian