Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 54 Hits
- u can choose options like 'Open' and 'New' on the right LCD. Choose 'New', and then wait until the sequen... tawheel. The displays are called the left LCD and right LCD.
The unit should have at least one physical ... ons//. The left column selects a group (1–4), the right column selects a track within the selected group.... layers// of the selected (active) track, and the right column is used to select //parameter layers// of
- mc_protocol_mappings: 40 Hits
- ssign EQ|Assign EQ|Inserts|
|Ch1 A 2 |Assign Page Right|Assign Instrument|Assign Instrument|Assign Instru... eft|Bank Left|Bank Left|Bank Left|
|Ch1 B 2 |Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank Right|Bank
- wilba_mb_6582_base_pcb_construction_guide: 10 Hits
- er// lead properly by putting the tip of the iron right in the joint, so it touches both the pad and the ... positions as the PCB, and that you put it in the right way.
The bridge rectifier I use is generally ide... the 5V rail:
SIDs: test pin 25 (fourth from top right);
COREs: test pin 11 (eleventh from top left);
74HC595/74HC165s: test pin 16 (first from top right)
Optocoupler 6N138: test pin 8 (first from top r
- windows_toolchain_svn: 9 Hits
- o the System Tray (that's the thing in the bottom right corner of your screen with the clock in it). It l... rtoisesvn|Click here to skip this section]]
\\
\\
Right-click the Pageant icon in the System Tray. A cont... it will run every time you start your PC. \\
Now, right-click on the shortcut, and select 'Properties'. I... s an Explorer extension; so everything is done by right-clicking on files and folders.
\\
\\
Here's a qu
- wiki:syntax: 7 Hits
- hp.net/images/php.gif?200x50}}
By using left or right whitespaces you can choose the alignment.
{{ wik... of your text: Add two spaces on the left to align right, two spaces on the right to align left and two spaces at least at both ends for centered text.
^ Table with alignment ^^^
| right| center |left |
|left |
- pga:buildchanbrd: 7 Hits
- will start the build on the left. Add a dual-row right angle header at the input position. You may use a single row right angle header if all inputs are unbalanced. You may use a dual-row right angle header and pull every other set of pins if you like. In all cases, headers must be right angle, as there will not be enough room between t
- syntax: 7 Hits
- hp.net/images/php.gif?200x50}}
By using left or right whitespaces you can choose the alignment
{{ wiki... of your text: Add two spaces on the left to align right, two spaces on the right to align left and two spaces at least at both ends for centered text.
^ Table with alignment ^^^
| right| center |left |
|left |
- stryd_one_word2doku: 6 Hits
- End If
If Not Right(.Text, 2) = "**" Then
.Insert... End If
If Not Right(.Text, 2) = "//" Then
.Insert... End If
If Not Right(.Text, 2) = "__" Then
.Insert... End If
If Not Right(.Text, 2) = "</del>" Then
.In
- acsensorizer_04: 6 Hits
- ncoder | current sensor selector (1..8) |
| | Right Encoder | Menu Selection Wheel |
| Bottom | Whi... ter for selected menu item / parameter 1 |
| | Right Encoder | Value setter for selected menu item / ... Foot-Pedal | A pedal is highly recommended! |
| Right Top | Switch | ON/OFF Switch | |
| Right Bottom | DC Connector | +9V DC Power Supply | Connector T
- eclipse: 6 Hits
- erences' window and click the 'Add' button on the right. These environment variables will automatically ... left-hand pane. Click the 'New...' button on the right. Give the variable the name 'MIOS32_ROOT', then ... =====
Select 'Import...' from the 'File' menu or right-click in the whitespace of the Project Explorer p... is project. Select the app_skeleton_cpp project, right-click and select 'Build Project'. You can also s
- stuartm_stukontrol: 6 Hits
- ol buttons on the left was bit easier than on the right (right-handed that I am)
* 8 channels and only one pot per channel is nice for smaller / improvisation... To better evaluate the layouts (main buttons left/right, distance between pot knobs etc.) I also printed ... ards. The intention was to have the knobs sitting right above the panel surface.
But as I did a first te
- wilba_mb_6582_control_surface_construction_guide: 6 Hits
- n it panel side up, check all the LEDs are at the right height. If any are not correct, you can heat up t... y encoders.
Mount the rotary encoders, check the right ones are non-detented.
Solder the rotary encoder... hich uses JST headers on the baseboard and either right-angled JST headers on the CS or just normal right-angled SIL headers. Coupled with ready-made JST cables
- home:software:windows:word2doku: 6 Hits
- End If
If Not Right(.Text, 2) = "**" Then
.Insert... End If
If Not Right(.Text, 2) = "//" Then
.Insert... End If
If Not Right(.Text, 2) = "__" Then
.Insert... End If
If Not Right(.Text, 2) = "</del>" Then
.In
- pga:buildoutbrd: 6 Hits
- The other three are just like it.\\
From left to right, the two pins marked – 1 + are the output pins. B... ground. Most users will want to mount a dual row right angle header here, so that you can just plug the ... ps, which go either way. Finally, furthest to the right are two 0.1uf capacitors and the NE5532 op amp ch... lay with the zero crossing feature, you can add a right angle header and use jumpers to select them. The
- protodeck: 5 Hits
- midibox_speakjet_k64_modul: 5 Hits
- fnp-sid: 5 Hits
- home:project:mb808: 5 Hits
- mb808: 5 Hits
- mbhp_genesis: 5 Hits
- john_e._finster: 5 Hits
- frequently_asked_questions_faq: 5 Hits
- wilba_mb_6582: 5 Hits
- windows_toolchain_core: 4 Hits
- getting_started_faq: 4 Hits
- home:mbhp:module:aout_ng: 4 Hits
- pga:choices: 4 Hits
- seq_v4l_mk._ii: 4 Hits
- windows_toolchain_codeblocks: 4 Hits
- 16th_fixed_polysequencer: 4 Hits
- aout_ng: 4 Hits
- mb_matrix: 4 Hits
- wilba_mb_6582_control_surface_parts_list: 3 Hits
- howto_create_a_pcb_english_german: 3 Hits
- encoders: 3 Hits
- wilba_mb_seq_construction_guide: 3 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 3 Hits
- make_encoders_out_of_your_mouse: 3 Hits
- home:skills:etching_pcbs: 3 Hits
- pga:preconfigsoftware: 3 Hits
- pedal_box: 3 Hits
- stryd_one_codeblocks: 3 Hits
- projects: 3 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 3 Hits
- nils_bulk_terms: 2 Hits
- scale-explorer: 2 Hits
- seqv4plus_le_mec: 2 Hits
- using_pic18f4620: 2 Hits
- mididocs:seq:building: 2 Hits
- questionable: 2 Hits
- pic18f4685_8bit_lcd_driver: 2 Hits
- home:mbhp:module:lcd: 2 Hits
- user_projects: 2 Hits
- lucem: 2 Hits
- home:project:midibox_sid_v1_manual: 2 Hits
- midibox_sid_v1_manual: 2 Hits
- cubase: 2 Hits
- windows_mios32_toolchain_core: 2 Hits
- changing_the_order_of_items_in_menu_pages: 2 Hits
- user_contest2007: 2 Hits
- wiki:test_page: 2 Hits
- mbqg_fp: 2 Hits
- ssm2164_getting_started: 2 Hits
- mcan: 2 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 2 Hits
- wild_weasel: 2 Hits
- wilba_mb_seq_pcb_bulk_order: 2 Hits
- midimasterclock: 2 Hits
- home:project:midibox_sid:v1_manual: 2 Hits
- parts_faq: 2 Hits
- introduction_to_ucapps.de: 2 Hits
- kicad: 2 Hits
- easy_cv: 2 Hits
- layout_improvements: 2 Hits
- wilba_mb_6582_psuopte: 2 Hits
- crystals_and_oscillators: 2 Hits
- introduction_to_midi: 2 Hits
- bipolar_12v_psu: 2 Hits
- application_development: 2 Hits
- midiboxmixermanual: 1 Hits
- dseq32_matrix: 1 Hits
- midiboxmixer: 1 Hits
- apparat_20_construction_blog: 1 Hits
- charge: 1 Hits
- mb-lre8x2cs_bulk_order_2014: 1 Hits
- wilba_mb_seq: 1 Hits
- midibox_snes_apu: 1 Hits
- ultracore: 1 Hits
- trsequencer: 1 Hits
- midibox_sid_tb303_mode: 1 Hits
- jdm_with_picpgm: 1 Hits
- jdm_with_winpic800: 1 Hits
- home:about:midibox: 1 Hits
- wilba_mb_6582_prototype: 1 Hits
- mididocs:seq:launchpadblm: 1 Hits
- midibox_audiomatrix: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- coresound: 1 Hits
- opl3_module_modified: 1 Hits
- pga:inputchoices: 1 Hits
- din_dout_pintable: 1 Hits
- midibox_seq_quick_reference: 1 Hits
- installing_gputils_and_sdcc_on_debian_linux: 1 Hits
- siliconheaven: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- wickedblade: 1 Hits
- midibox_quad_genesis: 1 Hits
- northernlightx: 1 Hits
- ssm2044_pcb: 1 Hits
- tos_-_a_tds_controller_blog: 1 Hits
- frontpanel_designer: 1 Hits
- arkade: 1 Hits
- lcd: 1 Hits
- electronics_diy_common_tools: 1 Hits
- aout_module: 1 Hits
- ain_4: 1 Hits
- mb-digiroland: 1 Hits
- seqv4plus_beat_led: 1 Hits
- pad_4_4: 1 Hits
- midibox_pokey: 1 Hits
- cs1: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- mbhp: 1 Hits
- midibox_ay_3_8912: 1 Hits
- midibox_tia: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- triggermatrix4: 1 Hits
- triggermatrix: 1 Hits
- msq-cc-lre: 1 Hits
- loopa-eurorack-panel: 1 Hits
- tpd_pcb: 1 Hits
- lre-oled-bar2: 1 Hits
- sensors: 1 Hits
- start: 1 Hits
- home:mbhp:module:din_dout_pin_list: 1 Hits
- forum_highlights_huis: 1 Hits
- pga:buildregbrd: 1 Hits
- best_pro-looking_midibox: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- seq_c64_keyboard_mod: 1 Hits
- home:skills:tools: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- layering_the_ui: 1 Hits
- home:community:groupe_paris: 1 Hits
- seq_buttons: 1 Hits
- home:home: 1 Hits
- pga:configmixer: 1 Hits
- installing_gputils_and_sdcc_on_osx: 1 Hits
- albs_wish_list: 1 Hits
- stryd_one_preparation: 1 Hits
- pga:patches: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- best_user_patches_librairy: 1 Hits
- c_from_first_principles: 1 Hits
- dougs_solder_price_survey: 1 Hits
- dsp: 1 Hits
- junction: 1 Hits
- nebula_bulk_orders_rean: 1 Hits
- waldorf_knobs_bulk_order_summer_2014_notification: 1 Hits
- home:project:midibox_sid:tb303_mode: 1 Hits
- home:project:midibox_sid_tb303_mode: 1 Hits
- how_to_organize_a_bulk_order: 1 Hits
- midibox_sd_card_sample_player: 1 Hits