Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 63 Hits
- en' and 'New' on the right LCD. Choose 'New', and then wait until the sequencer has created the session.... pending on where you are) to get to the top menu, then using the datawheel to browse the options on the ... pressing & holding one track selection button and then pressing the others one by one; press another tim... right channel for your equipment is).//
>>>
>>>//Then push track selection button #2 to select G1T2. Yo
- wilba_mb_6582_base_pcb_construction_guide: 34 Hits
- he PacTec PT-10 case (like the original MB-6582), then you should use a Commodore 64 power supply (i.e. ... divert it to J74 and through the 5v regulator and then back to J73 and the 5v supply lines. //In theory,... people could connect a single 9v AC power supply, then connect the regulated 9v DC supply at J4:pin3 to J74:pin2, then connect the 5v DC output at J74:pin1 to J4:pin2.
- stryd_one_word2doku: 27 Hits
- If Len(.Text) > 1 And InStr(1, .Text, vbCr) Then
' Just process the chunk befo...
If Not .Text = vbCr Then
If Not Left(.Text, 2) = "**" Then
.InsertBefore "**"
... If Not Right(.Text, 2) = "**" Then
.InsertAfter "**"
- home:software:windows:word2doku: 27 Hits
- If Len(.Text) > 1 And InStr(1, .Text, vbCr) Then
' Just process the chunk befo...
If Not .Text = vbCr Then
If Not Left(.Text, 2) = "**" Then
.InsertBefore "**"
... If Not Right(.Text, 2) = "**" Then
.InsertAfter "**"
- wilba_mb_6582_control_surface_construction_guide: 16 Hits
- with the PCB when gluing them to the frontpanel.
Then after you have a frontpanel with screws and threa... is best to solder the tactile switches FIRST and then use these (along with the PCB and panel attached)... ed mine).
If I have not explained myself enough, then please wait for a more detailed explanation in th... on my head trying to do 23 blobs on the panel AND THEN put the panel and PCB together. An extra 20+20 ho
- windows_toolchain_svn: 13 Hits
- al files via web browser. If you're reading this, then you already have a browser installed. All you nee... method will be best suited to your requirements, then this document will be a little easier to follow (... S/Application code. If you don't change any code, then you can [[#tortoisesvn|click here to skip this se... as been added to the MIOS SVN server by an admin, then you will be able to authenticate to write to the
- aout_ng: 9 Hits
- ow legs! Use a magnifying glass if you have one). Then solder R49 and the LED, the 100nF capacitors, chi... g. You can leave out the TL074s for a first test. Then connect J1 to the core. Power up your Midibox. If... don't connect ground to J3 to avoid ground loops. Then measure the voltages between pin 4 and GND (shoul... wn the box, install IC3 and IC4 to their sockets. Then power up again and recheck all voltages. Congratu
- msq-cc-bcr: 9 Hits
- et to MidiChannel 0, to get 64CCs instead of 32), then the Global Page: have the abillity to show/edit a... eed if you want to sequence other song structures then 4/4 (which is default)!\\
4. Power the core up.\\... he filestructure (patches) are already existent...then it takes less then half a minute to dump the BCR-2000 Layout Data...\\
You dont have to save the preset
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 8 Hits
- sits on the spot where the regular "A" would sit, then the label of the element
in the NGC script has t... eting all the changed files before the update and then getting all the new files again.
**Forth**, this... see below) with the size of 128x16 pixels (WxH), then your empty image has to be 2048x128 pixels (WxH) ... the picture has to be exported as a *.bmp first. Then
the *.bmp has to be opened in Gimp again and the
- ssm2044_pcb: 8 Hits
- ters turned off. First a sweep without resonance, then a bit of resonance and high resonance. Last a swe... e lower third of values doesn't change very much, then there's a small area where you can really tweak t... o make the SSM input conform to that standard and then calibrate the output of your AOUT module to also ... ine DEFAULT_J5_FUNCTION 3", recompile and upload, then connect one of core:J5's pins to J3 of the SSM mo
- stryd_one_codeblocks: 8 Hits
- by all that mumbo jumbo. If you're totally newbie then this document is also for you :) I've included ev... essed files. If you already have winzip or winrar then you won't need this. I recommend the latest versi... * If you are prompted to restart your computer, then do so (yes, now... I know it's annoying!).
=====... ct 'Properties'.
* Click on the 'Advanced' tab, then click 'Environment Variables'
* Under either Us
- windows_toolchain_core: 8 Hits
- by all that mumbo jumbo. If you're totally newbie then this document is also for you :) I've included ev... ling any of the following applications first, and then rebooting your PC.
====== Windows Utilities ====... essed files. If you already have winzip or winrar then you won't need this. I recommend the latest versi... or SDCC) is not in the current working directory, then the system will look for that program in each of
- windows_toolchain_codeblocks: 8 Hits
- f you are going to be coding your apps only in C, then you only need to install this one last applicatio... is complete. If you are not sure if this is you, then it isn’t.... Read on... You can always come back ... It's an IDE. If you don't know what that entails, then just trust me that you will like it ;)
* GDB - ... If you've been following the three-part tutorial, then you're about right.
===== Code::Blocks =====
F
- midibox_tia: 8 Hits
- nput phase zero clock to the microprocessor which then produces the system 02 clock (1.19 Mhz).
==== Da... nd box 80%>
<wrap lo>If Vx_LAST_VEL ≤ Vx_INIT_VEL then</wrap> Vx_LAST_VEL = Vx_INIT_VEL
</WRAP>
</WRAP>\... left round box 90%>
<wrap lo>If Vx_DEPTH_VEL > 0 then </wrap>\\
<wrap notice>**AMP**</wrap> = <wrap not... left round box 90%>
<wrap lo>If Vx_DEPTH_VEL < 0 then </wrap>\\
<wrap notice>**AMP**</wrap> = <wrap not
- mb_2069: 7 Hits
- mcan: 7 Hits
- fnp-sid: 7 Hits
- macos_mios32_toolchain_core: 7 Hits
- home:mbhp:module:aout_ng: 7 Hits
- albs_waldorf_knob_-_order_no._3: 6 Hits
- c_from_first_principles: 6 Hits
- questionable: 6 Hits
- mbqg_fp: 6 Hits
- windows_mios32_toolchain_core: 6 Hits
- wilba_mb_6582_prototype: 6 Hits
- howto_create_a_pcb_english_german: 5 Hits
- sync_4_newbies: 5 Hits
- home:project:mb808: 5 Hits
- home:skills:etching_pcbs: 5 Hits
- mb808: 5 Hits
- eclipse: 5 Hits
- cubase: 4 Hits
- wiki:syntax: 4 Hits
- albs_waldorf_knob_bulk_order: 4 Hits
- syntax: 4 Hits
- stuartm_stukontrol: 4 Hits
- wilba_mb_seq_construction_guide: 4 Hits
- apparat_20_construction_blog: 4 Hits
- tos_-_a_tds_controller_blog: 4 Hits
- wickedblade: 4 Hits
- troubleshooting: 4 Hits
- introduction_to_ucapps.de: 4 Hits
- midibox_audiomatrix: 4 Hits
- triggermatrix: 4 Hits
- installing_gputils_and_sdcc_on_osx: 4 Hits
- mb_matrix: 3 Hits
- seq_buttons: 3 Hits
- msq-cc-lre-v2: 3 Hits
- troubleshooting_lcd_displays: 3 Hits
- home:skills:troubleshooting: 3 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 3 Hits
- mididocs:seq:usingblm: 3 Hits
- control_surface_troubleshooting: 3 Hits
- wilba: 3 Hits
- svn: 3 Hits
- core4disc: 3 Hits
- elo: 3 Hits
- korg_wavedrum_midification: 3 Hits
- midibox_quad_genesis: 3 Hits
- windows_toolchain_notepadplus: 3 Hits
- flo: 3 Hits
- using_pic18f4620: 3 Hits
- daw-btn: 3 Hits
- john_e._finster: 2 Hits
- seq_gp: 2 Hits
- opamp: 2 Hits
- martinsomerville: 2 Hits
- harmonic: 2 Hits
- frequency: 2 Hits
- bipolar_12v_psu: 2 Hits
- trsequencer: 2 Hits
- emf: 2 Hits
- wilba_mb_seq: 2 Hits
- wilba_mb_6582_panels: 2 Hits
- home:about:midibox: 2 Hits
- mididocs:seq:building: 2 Hits
- pga:inputchoices: 2 Hits
- dictionary:4-bit_mode: 2 Hits
- fadercore_-_vlr-8enc: 2 Hits
- acsensorizer_04: 2 Hits
- cma: 2 Hits
- midibox_sid_faq: 2 Hits
- hardsid.dll: 2 Hits
- pga:smtsoldering: 2 Hits
- midibox_arp: 2 Hits
- fadercore_-_vlr-3x8but: 2 Hits
- midibox_speakjet_k64_modul: 2 Hits
- pga:preconfigsoftware: 2 Hits
- audiocommander: 2 Hits
- installing_gputils_and_sdcc_on_debian_linux: 2 Hits
- pga:buildchanbrd: 2 Hits
- jdm_with_winpic800: 2 Hits
- playground: 2 Hits
- linux_mios32_toolchain_core: 2 Hits
- wilba_mb_6582_parts_list: 2 Hits
- wcore_usb: 2 Hits
- scratchcontroller: 2 Hits
- seqv4plus_le_mec: 2 Hits
- mb_visual_metronome: 2 Hits
- wilba_mb_6582_psuopte: 2 Hits
- howto:dev:libcan: 2 Hits
- stryd_one_preparation: 2 Hits
- chaos_matrix: 2 Hits
- control_board: 2 Hits
- wcore_midi8: 2 Hits
- enc_4_4: 2 Hits
- mbhp_genesis: 2 Hits
- phatline: 2 Hits
- pad_4_4: 2 Hits
- envelope-follower-bissel-based: 2 Hits
- frequently_asked_questions_faq: 2 Hits
- wilba_mb_6582: 2 Hits
- msq-cc-lre: 2 Hits
- seqv4plus_jog: 1 Hits
- seqv4plus_enc-plate: 1 Hits
- midibox_ay_3_8912: 1 Hits
- subroutine: 1 Hits
- pga:purpose: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- wilba_mb_6582_parts_bulk_order: 1 Hits
- home:mbhp:module:core32: 1 Hits
- display_driver: 1 Hits
- serial_graphics_tablet: 1 Hits
- latigid_on: 1 Hits
- wilba_mb_seq_parts_guide: 1 Hits
- pga:buildoutbrd: 1 Hits
- pga:stackboards: 1 Hits
- pga:softwareoverview: 1 Hits
- midiboxmixermanual: 1 Hits
- mididocs:seq:blm16x16_build_guide: 1 Hits
- mb_olre16: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- xyz-ir-controller: 1 Hits
- tm5-gateinput: 1 Hits
- home:project:midi_mapper: 1 Hits
- midiboxmixer: 1 Hits
- lre5-lcd2: 1 Hits
- midibox_live: 1 Hits
- lre-oled-bar2: 1 Hits
- midibox_snes_apu: 1 Hits
- triggermatrix5: 1 Hits
- wilba_mb_6582_builders_list: 1 Hits
- daw-encoder-display: 1 Hits
- blm16x16v2: 1 Hits
- midibox_uc: 1 Hits
- tm5-housing: 1 Hits
- layout_improvements: 1 Hits
- scale-explorer: 1 Hits
- 16x4blm_pcb: 1 Hits
- fadercore_-_fadermodule_for_audio_daw: 1 Hits
- sammichsid: 1 Hits
- mios_c_simulator_-_debugger: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- euro-midi-io: 1 Hits
- lre-oled-bar: 1 Hits
- triggermatrix4: 1 Hits
- cv1: 1 Hits
- clock2audio2clock: 1 Hits
- dictionary:boot: 1 Hits
- home:skills:soldering: 1 Hits
- pickit2: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- dictionary:binary: 1 Hits
- handshake: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits
- mididocs:seq:hardwareconfig: 1 Hits
- pga:patches: 1 Hits
- bosone: 1 Hits
- midibox_cv_v1: 1 Hits
- digital: 1 Hits
- dougs_solder_price_survey: 1 Hits
- dtmf: 1 Hits
- sammichfm: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- usb: 1 Hits
- universal_control_editor_documentation_english: 1 Hits
- soldering: 1 Hits
- interpreter: 1 Hits
- linux_midi: 1 Hits
- ucdoctemplate: 1 Hits
- mbseqzip: 1 Hits
- newbie: 1 Hits
- ocr: 1 Hits
- transformer: 1 Hits
- pcmcia: 1 Hits
- thyristor: 1 Hits
- power_supply: 1 Hits
- rf: 1 Hits
- routine: 1 Hits
- scsi: 1 Hits
- button_overlay: 1 Hits
- goblinz: 1 Hits
- home:mbhp:module:din: 1 Hits
- midibox_lc: 1 Hits
- pga:buildregbrd: 1 Hits
- semi-conductor: 1 Hits
- dictionary:bi-directional: 1 Hits
- seq_v4l_mk._ii: 1 Hits
- midibox_master_keys: 1 Hits
- mb-digiroland: 1 Hits
- pga:compile: 1 Hits
- changing_the_order_of_items_in_menu_pages: 1 Hits
- mb909: 1 Hits
- seq_c64_keyboard_mod: 1 Hits
- easy_cv: 1 Hits
- home:project:midi_router: 1 Hits
- stryd_one: 1 Hits
- kicad: 1 Hits
- midibox_seq_v2_4c: 1 Hits
- cpld: 1 Hits
- antixfm: 1 Hits
- pcd8544: 1 Hits
- comparator: 1 Hits
- getting_started_faq: 1 Hits
- stryd_one_mbhp: 1 Hits
- parts_faq: 1 Hits
- peake: 1 Hits
- midibox_ay_ym_v2: 1 Hits
- dcb: 1 Hits
- home:software:windows:cadsoft_eagle: 1 Hits
- eagle: 1 Hits
- checksum: 1 Hits
- fiber_optics: 1 Hits