User Tools

Site Tools


triggermatrix4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
triggermatrix4 [2021/07/30 23:16]
phatline
triggermatrix4 [2021/10/21 13:39] (current)
phatline
Line 1: Line 1:
 ====== TriggerMatrix V4 ====== ====== TriggerMatrix V4 ======
-{{:​phatline:​TM4.jpg?​700|}}\\ + 
-**Planed in 3D:**\\+**REAL:​**\\ 
 +{{:​phatline:​tm4-perspektive-l.hd-.jpg?​700|}}\\ 
 + 
 +**CAD-Design:**\\
 {{:​phatline:​TM4-Render-black.jpg?​700|}}\\ {{:​phatline:​TM4-Render-black.jpg?​700|}}\\
 \\ \\
Line 8: Line 11:
 \\ \\
  
-===== CODE, FIRMWARE =====  +===== CODE, FIRMWARE ===== 
-**1. Upload MIOS Bootloader**\\ +**Install [[http://​www.ucapps.de/​mios_studio.html|MIOS Studio]], connect TM4 via USB, and Start the STUDIO**\\ 
-**2. type following commands into the MIOS-TERMINAL:​**\\+\\ 
 +**1. Upload ​[[http://​www.ucapps.de/​mios32/​mios32_bootloader_v1_018.zipm|MIOS BOOTLOADER]]**\\ 
 +**2. (only needet for Virgin Machines) ​type following commands into the MIOS-TERMINAL:​**\\
   * set lcd_type GLCD_SSD1306_ROTATED\\   * set lcd_type GLCD_SSD1306_ROTATED\\
   * set lcd_num_x 9\\   * set lcd_num_x 9\\
Line 17: Line 22:
   * set lcd_height 64\\   * set lcd_height 64\\
   * store\\   * store\\
-**3. Upload the Triggermatrix Code:**\\ +**3. (for Version Updates) Unzip {{:​phatline:​TM4.zip|the ​TM4-Firmware}}, and Upload the TM4.hex**\\ 
-{{:​phatline:​tm_V3.zip|the ​Code}} FIXME upload ​TM4 Code\\+**4. Unconnect USB & Connect the USB again --- finished.**\\ 
 +**5. If the Machine is not detected by mios studio, and you already checked the usb-connections,​ the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "​bLOAD",​ now you can upload new & unbroken codes, dont forget to set it to "​normal"​ back again - after upload new code - else the APP will not boot...**\\
  
 ===== BUILD ===== ===== BUILD =====
Line 45: Line 51:
   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)
   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)
 +
 +
 +===== MODs =====
 +
 +==== Stable USB-Type-B - Mod ====
 +{{:​phatline:​TM4-USB-TYPE-B-MOD.jpg?​400|}}\
  
 ====Pictured Doku==== ====Pictured Doku====
Line 65: Line 77:
 {{:​phatline:​TM4-Labeled.jpg?​400|}}\\ {{:​phatline:​TM4-Labeled.jpg?​400|}}\\
 **Wires:​**\\ **Wires:​**\\
-{{:​phatline:​TM4-Wire-Fader-Detail.jpg?​400|}}\ +{{:​phatline:​TM4-Wire-Fader-Detail.jpg?​400|}} 
-{{:​phatline:​TM4-Wires.jpg?​400|}}\\+{{:​phatline:​TM4-Wires.jpg?​400|}} 
 +{{:​phatline:​TM4-Wired.jpg?​400|}}
 \\ \\
 **Wood-Elements:​**\\ **Wood-Elements:​**\\
Line 72: Line 85:
 {{:​phatline:​TM4-Woods-measures.jpg?​700|}}\\ {{:​phatline:​TM4-Woods-measures.jpg?​700|}}\\
 {{:​phatline:​TM4-Woods-paint.jpg?​700|}}\\ {{:​phatline:​TM4-Woods-paint.jpg?​700|}}\\
 +{{:​phatline:​TM4-Wood-Mount.jpg?​700|}}\\
 +
 +**Screws:​**\\
 +{{:​phatline:​TM4-PCB-Spacer.jpg?​700|}}\\
 +{{:​phatline:​TM4-M2-Nuts.jpg?​700|}}\\
 +
 \\ \\
 **DIY-Back-Panel:​**\\ **DIY-Back-Panel:​**\\
Line 113: Line 132:
   * Free programmable Swing to each Step, with 2 different swing Length-sets,​ which are controlled live with encoder\\   * Free programmable Swing to each Step, with 2 different swing Length-sets,​ which are controlled live with encoder\\
   * copy, paste, erase of pages\\   * copy, paste, erase of pages\\
-  * copy, paste, erase of rows\\E+  * copy, paste, erase of rows\\
   * fixed forward play direction\\   * fixed forward play direction\\
  
triggermatrix4.1627686995.txt.gz · Last modified: 2021/07/30 23:16 by phatline