User Tools

Site Tools


triggermatrix4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
triggermatrix4 [2021/07/31 13:01]
phatline
triggermatrix4 [2021/10/21 13:39] (current)
phatline
Line 1: Line 1:
 ====== TriggerMatrix V4 ====== ====== TriggerMatrix V4 ======
-{{:​phatline:​TM4.jpg?​700|}}\\ + 
-**Planed in 3D:**\\+**REAL:​**\\ 
 +{{:​phatline:​tm4-perspektive-l.hd-.jpg?​700|}}\\ 
 + 
 +**CAD-Design:**\\
 {{:​phatline:​TM4-Render-black.jpg?​700|}}\\ {{:​phatline:​TM4-Render-black.jpg?​700|}}\\
 \\ \\
Line 19: Line 22:
   * set lcd_height 64\\   * set lcd_height 64\\
   * store\\   * store\\
-**3. (for Version Updates) Unzip {{:​phatline:​TM4.zip|the TM4-Firmware}},​ and Upload the TM4.hex\\ +**3. (for Version Updates) Unzip {{:​phatline:​TM4.zip|the TM4-Firmware}},​ and Upload the TM4.hex**\\ 
-**4. Unconnect USB & Connect the USB again --- finished.\\ +**4. Unconnect USB & Connect the USB again --- finished.**\\ 
-**5. If the Machine is not detected by mios studio, and you already checked the usb-connections,​ the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "​bLOAD",​ now you can upload new & unbroken codes, dont forget to set it to "​normal"​ back again - after upload new code - else the APP will not boot...\\+**5. If the Machine is not detected by mios studio, and you already checked the usb-connections,​ the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "​bLOAD",​ now you can upload new & unbroken codes, dont forget to set it to "​normal"​ back again - after upload new code - else the APP will not boot...**\\
  
 ===== BUILD ===== ===== BUILD =====
Line 48: Line 51:
   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)
   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)
 +
 +
 +===== MODs =====
 +
 +==== Stable USB-Type-B - Mod ====
 +{{:​phatline:​TM4-USB-TYPE-B-MOD.jpg?​400|}}\
  
 ====Pictured Doku==== ====Pictured Doku====
triggermatrix4.1627736517.txt.gz · Last modified: 2021/07/31 13:01 by phatline