Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 19 Hits
- section 3.2.4.
Note that the Roll trigger won't work if the Sustain setting on MODE page is on.
\\
=... or each "hand".
>>>//Example: The following will work://
[[beginners_guide|{{note-layers1.gif}}]]
>>>//The following will work://
[[beginners_guide|{{note-layers2.gif}}]]
>>>//The following will work too, but it will sound exactly the same as the ex
- user_contest2007: 12 Hits
- The Games =====
Everyone can participate.
Your work have to be show in this dedicated section of the ... on for your project, of course, you can show your work into many sections if needed.
Please take care o... e if needed, sound examples would be great if you work on an audio based project. The quality of the pic... one around you that own a great camera...
If you work on an user application, share the code here, sayi
- wilba_mb_6582_base_pcb_construction_guide: 9 Hits
- t and switch. Please do not assume this idea will work well, it might introduce noise, hum and heat!//
... . //In theory,// this will allow option A or B to work, and can generate 9v and 12v supplies. Alternatel... :pin2. //In theory,// this will allow option A to work, but option B would not be possible because the 5... d in option B.
People choosing this solution can work out for themselves what extra wiring, parts and s
- questionable: 8 Hits
- =====
**History:** Several years ago, I started work on an Analogue Modular Synth (still unfinished), ... are Neutrik/RE-AN (Mouser # 550-77304), and will work well for the vertical faders, but I am looking fo... projects in the past, so I'm hoping that they'll work well for this project as well. The knobs used fo... se, but it worked for me.
**DOUT Module: LED's work properly for a short while, then all light up.**
- wickedblade: 6 Hits
- / fx looper project.
One final thing about me: I work as a software development engineer, so I'm really... x) ===
So how do the custom controls footswitches work? Basically, for any patch, you can specify that t... be careful with my measurements, but this should work.
==== Possible relays ====
All relays are DPDT,... chematics using single transistors, so it doesn't work as is with darlington pairs. Maybe the darlington
- frequently_asked_questions_faq: 6 Hits
- d you like to spend your leisure time doing slave work for someone else? :)
* ** How hard would it be... complete documentation - many of them are easy to work with, the companies give you all the documents yo... en the components does exist and the MIDIBox will work with the first power-on. But creating a PCB may t... received MIDI signal. The MIDI Thru Port will not work without this amplifier.
* **Can I power a P
- c_tips_and_tricks_for_pic_programming: 6 Hits
- the transfer of an array between modules does not work properly, e.g. file 1:
<code c>
unsigned char MI... ors:
<code c>
unsigned char myArray[256]; // will work
unsigned char myArray[257]; // will not be linked!
unsigned char myArray[64][4]; // will work
unsigned char myArray[64][5]; // will not be linked!
unsigned int myArray[128]; // will work
unsigned int myArray[129]; // will not be linked!
- wilba_mb_6582: 6 Hits
- DIY builds I've seen in a while - just beautiful work."// - Will O'Brian, [[http://www.hackaday.com/200... MIDIbox modules into one compact PCB, and should work exactly the same as connecting multiple MIDIbox m... t and switch. Please do not assume this idea will work well, it might introduce noise, hum and heat!//
... e PCB =====
The control surface PCB is design to work with the parts described in the parts list:
[[wi
- mididocs:seq:blm16x16_build_guide: 5 Hits
- 40 hours and he was never prepared to do the same work again. Although the unit still works some five ye... of material to protect it from the clamp) to the work space, otherwise your parts may jump around if th... ably be a bit more sturdy. TK. suggests 1k should work, the others are too high in resistance to get goo... mount DIN, but a cheaper pair of DIN8 plugs might work.
* M2 hardware is a bit difficult to find in no
- hardsid.dll: 5 Hits
- at :D
\\
\\
====== What do I need to make this work? ======
* Obviously you will need a MIDIbox SID V2 synthesizer (any model or build will work. One SID is enough)
* A fast MIDI interface. [[... D, MB6582, even a self-built modular version will work. The important issue is that it uses the MBSIDV2 ... utines. This means that MBSIDV1 firmware will not work since it does not include the needed SID-playing
- wilba_mb_6582_psuopte: 5 Hits
- e that this is and option.
This is primarily the work of Altitude from the forums. I just went through ... choice. There are other parts that will probably work. There are other brands, other Recom parts, etc. ... iscarded resistor legs soldered to the board will work fine too) and a couple longer, insulated jumpers ... l note—ignore this if you don’t care *how* things work and just want to get to building—on why we change
- midiboxfx_-_midifiying_analog_gear: 5 Hits
- vary the resistance of the LDR. <sub>would this work with PWM of the LED? DrBunsen</sub>
Circuitry on... response time <sub>this suggests maybe PWM would work!</sub> doesn’t have to be a bad thing for most ap... esign. You should always use a yellow LED; LDR’s work best with this colour.
This design uses an op-a... f Waterson's
TR-606 modifications and adapted to work on the DR-110.//
//Also note: This option is not
- parts_faq: 4 Hits
- d I buy? =====
**1/4W** (.25watt) or higher will work fine for everything midibox, unless otherwise not... N4002 vs. 400V for 1N4004). Any 1N400X diode will work in place of any other 1N400X diode -WITH A SMALLE... uld I order, 18LF452-I/P or 18F452-I/P? ====
Both work fine, the "LF" version is a low voltage version.
... been tested and it is confirmed that it does not work due to this bug. Microchip are aware of this bug
- midibox_snes_apu: 4 Hits
- ctor.
==== This Page ====
This page is where all work and all useful notes and correspondance will be p... ort to a PC and of course the really nitty gritty work of emulating the entire behaviour of the APU itse... a the song/program that is from a SNES game. This work proves that is is possible to harness the APU out... red project is below where .dll and .c files that work with a APU plugged into a parallel port are provi
- wilba_mb_6582_prototype: 4 Hits
- midibox_pokey_2: 4 Hits
- windows_toolchain_core: 4 Hits
- midibox_sid_faq: 4 Hits
- eclipse: 4 Hits
- mb-sidr8tr:start: 4 Hits
- linux_midi: 3 Hits
- mididocs:midibox_seq_v4: 3 Hits
- changing_dout_pins: 3 Hits
- lcd: 3 Hits
- home:mbhp:module:lcd: 3 Hits
- lucem: 3 Hits
- midibox_quad_genesis: 3 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 3 Hits
- john_e._finster: 3 Hits
- chipset: 3 Hits
- chaos_matrix: 3 Hits
- seq_v4l_mk._ii: 3 Hits
- home:mbhp:module:core: 3 Hits
- midi_interface_whitelist: 3 Hits
- mbhp_genesis: 3 Hits
- windows_mios32_toolchain_core: 3 Hits
- sammichsid: 3 Hits
- wilba_mb_6582_control_surface_construction_guide: 3 Hits
- wilba_mb_seq_parts_guide: 3 Hits
- cubase: 3 Hits
- mb_matrix: 3 Hits
- fnp-sid: 3 Hits
- findbuddha: 3 Hits
- make_encoders_out_of_your_mouse: 3 Hits
- mcan: 3 Hits
- home:software:windows:word2doku: 2 Hits
- best_customization_extension: 2 Hits
- windows_toolchain_svn: 2 Hits
- home:skills:troubleshooting: 2 Hits
- midiboxmixer: 2 Hits
- home:skills:etching_pcbs: 2 Hits
- pga:configmixer: 2 Hits
- home:about:midibox: 2 Hits
- mbqg_fp: 2 Hits
- forum_highlights_huis: 2 Hits
- howto:dev:autotools-skeleton: 2 Hits
- mididocs:seq:hardwareconfig: 2 Hits
- home:project:mb808: 2 Hits
- compliant: 2 Hits
- home:skills:soldering: 2 Hits
- howto_create_a_pcb_english_german: 2 Hits
- what_is_a_midibox: 2 Hits
- wilba_mb_seq_pcb_bulk_order: 2 Hits
- waldorf_knobs_bulk_order_spring_2014: 2 Hits
- pedal_box:pc_editor_manual: 2 Hits
- acsensorizer_04: 2 Hits
- using_pic18f4620: 2 Hits
- pga:inputchoices: 2 Hits
- mb808: 2 Hits
- mios_c_simulator_-_debugger: 2 Hits
- application_development: 2 Hits
- midi_interface_blacklist: 2 Hits
- mididocs:seq:building: 2 Hits
- dseq32: 2 Hits
- how_to_setup_xcode3_to_access_the_svn_server: 2 Hits
- midibox_audiomatrix: 2 Hits
- stryd_one_word2doku: 2 Hits
- upgrade_cs_step_a_mbsidv1_to_have_shift_function_on_menu_button: 2 Hits
- linux_mios32_toolchain_core: 2 Hits
- arkade: 2 Hits
- tpd_pcb: 2 Hits
- antichambre: 2 Hits
- introduction_to_ucapps.de: 2 Hits
- scale-explorer: 2 Hits
- inkscape: 2 Hits
- wiki:syntax: 2 Hits
- stuartm_stukontrol: 2 Hits
- scsi: 2 Hits
- wcore_i2c: 2 Hits
- troubleshooting: 2 Hits
- 16x4blm_pcb: 2 Hits
- mididoc:midibox_kb: 2 Hits
- wilba_mb_6582_parts_list: 2 Hits
- soldering: 2 Hits
- waldorf_knobs_bulk_order_fall_2013: 1 Hits
- core_module: 1 Hits
- ludovic_drochon: 1 Hits
- mb-808re: 1 Hits
- ain_4: 1 Hits
- stribe: 1 Hits
- dictionary:ascii: 1 Hits
- gm5x5x5: 1 Hits
- sd_card_module: 1 Hits
- mbhp_acronyms: 1 Hits
- electronics_diy_common_tools: 1 Hits
- scratchcontroller: 1 Hits
- albs_waldorf_knobs_2011_bulk_order: 1 Hits
- protodeck: 1 Hits
- wilba_mb_6582_license: 1 Hits
- waldorf_knobs_bulk_order_2013: 1 Hits
- pic18f4685_8bit_lcd_driver: 1 Hits
- midibox_speakjet_k64_modul: 1 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 1 Hits
- wilba_midibox_rc: 1 Hits
- jdm_with_winpic800: 1 Hits
- ju_control_roland_alpha_juno_control_panel_cs: 1 Hits
- latigid_on: 1 Hits
- trsequencer: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- home:project:midi_mapper: 1 Hits
- lre-oled-bar2: 1 Hits
- pedal_box: 1 Hits
- midibox_live: 1 Hits
- wilba_mb_seq: 1 Hits
- midiboxdmx: 1 Hits
- triggermatrix: 1 Hits
- envelope-follower-bissel-based: 1 Hits
- midibox_tia: 1 Hits
- midibox_3396: 1 Hits
- midibox_uc: 1 Hits
- apparat_20_construction_blog: 1 Hits
- wcore_midi8: 1 Hits
- wcoref4_pcb: 1 Hits
- sync_4_newbies: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- wiki:welcome: 1 Hits
- ssm2164_getting_started: 1 Hits
- mididocs:seq:launchpadblm: 1 Hits
- wilba_mb_6582_control_surface_parts_list: 1 Hits
- installing_gputils_and_sdcc_on_fedora_core_5: 1 Hits
- ssm2164_pcb: 1 Hits
- eusart_bug: 1 Hits
- aout_ng: 1 Hits
- aout_4: 1 Hits
- pga:stackboards: 1 Hits
- midibox_traktor: 1 Hits
- bipolar_12v_psu: 1 Hits
- fadercore_-_vlr-8enc: 1 Hits
- ssm2044_pcb: 1 Hits
- pga:softwareoverview: 1 Hits
- midibox: 1 Hits
- compact_5_12_-12_psu: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- routine: 1 Hits
- power: 1 Hits
- m00dawg: 1 Hits
- plug-and-play_or_pnp: 1 Hits
- neatest_pro_internal_wiring: 1 Hits
- fixed_bor_setup: 1 Hits
- home:software:xplatform:firefox_search: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- opamp: 1 Hits
- how_to_use_midibox_cv_with_a_dout: 1 Hits
- home:about:mbhp_acronyms: 1 Hits
- octal: 1 Hits
- goblinz: 1 Hits
- newbie: 1 Hits
- waldorf_knobs_bulk_order_april_2013: 1 Hits
- stryd_one_firefox_search: 1 Hits
- durisian: 1 Hits
- ucoregb: 1 Hits
- c_from_first_principles: 1 Hits
- most_freaky_internal_wiring: 1 Hits
- forum_highlights_misc_projects: 1 Hits
- glitch: 1 Hits
- ic: 1 Hits
- junction: 1 Hits
- kartoshka_encoders: 1 Hits
- martinsomerville: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- dougwellington: 1 Hits
- midiboxmixermanual: 1 Hits
- midibox_master_keys: 1 Hits
- live: 1 Hits
- best_user_application: 1 Hits
- charge: 1 Hits
- ultracore: 1 Hits
- best_song_produced_with_midibox_gear: 1 Hits
- nebula: 1 Hits
- midibox_pokey: 1 Hits
- pickit2: 1 Hits
- usb_gm5_module: 1 Hits
- compiled_c_code_size: 1 Hits
- wikify:project: 1 Hits
- alternativesequencer: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- drive_a_midibox-lc_with_4_lcds_on_1_core: 1 Hits
- sammichfm: 1 Hits
- home:skills:tools: 1 Hits
- stryd_one: 1 Hits
- waldorf_knobs_bulk_order_2012: 1 Hits
- home:mbhp:module:aout_ng: 1 Hits
- home:project: 1 Hits
- audiocommander: 1 Hits
- best_recycled_midibox: 1 Hits
- arumblack: 1 Hits
- pga:preconfigsoftware: 1 Hits
- subroutine: 1 Hits
- peake: 1 Hits
- layering_the_ui: 1 Hits
- ssp_mmc: 1 Hits
- waldorf_knobs_bulk_order_2015_2016: 1 Hits