midibox_seq

anonymous@undisclosed.example.com (Anonymous) — Tue, 22 Mar 2016 18:17:29 +0000

Summary This page is the main area for documenting everything related to the Midibox SEQ V3 application It has been replaced by MIDIbox SEQ V4 meanwhile! MIDIbox SEQ V3 Documentation uCapps pages * * * * * *

wild_weasel

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Jul 2016 01:49:13 +0000

SELEKTOR II [ ] This is Wild_Weasel little Midibox Traktor section.This is again a denon remote control unit retrofit, namely a RC-35 MK III for the DENON DN-2000F MK III cd-player unit. The unit was bought at ebay for approximately 50€. After testing the player, which still worked, I ripped it apart.

midibox_speakjet_k64_modul

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 05:54:11 +0000

MIDIBox SpeakJet K64 Modul Introduction K64 Modul is seperated in 2 Applications - K64 and K2 SpeakJet Application: K64 Application is a classic keyboard-controller to play MIDI Notes from retro C64 keyboard for seperate UPPER- and LOWER-Keyfield Input. You can control MIDI events for specific channels too. So you can use it as mobile input device for external syntheziser or to use it as input keys for SEQV3 application. With an additonal seperate SpeakJet Modul you are able to control para…

midibox_tia

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Oct 2020 10:18:04 +0000

MIDIbox TIA What is it? The Television Interface Adaptor (TIA) is the custom chip that is the heart of the Atari 2600 game console, generating the screen display, sound effects, and reading input controller. * Stella = Name (by its maker) of Atari hardware design engineer Joe Decuir's bicycle

midibox_uc

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:01:30 +0000

MIDIbox UC (Universal Control) This is the home of the MIDIbox UC. It was created during a one-semester university project. You can find the existing documentation, sourcecode, and Java Software for programming it here! Beware that this is work based on the old 8-bit core (PIC-based). Back then, the Core32 did not exist, on which the implementation would be FAR easier. E.g., there you can directly connect 2 LCDs (no need for chaining 2 cores as done here), you have the SD card as a virtually …

drumstuff

anonymous@undisclosed.example.com (Anonymous) — Mon, 13 Jun 2016 13:00:36 +0000

FIXME Update thing out there A place to catalogue analogue drum experiments, clonings, mods, hacks, bends, MIDIbox integration, specialised drum sequencers, MBSEQ firmware, SID as drum machine, triggering, E-Drum heads etc etc etc. Related pages on this wiki and ucapps.de :

mb_matrix

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Feb 2015 09:36:01 +0000

MIDIbox Matrix - MIDI Matrix with 56 Inputs and 56 Outputs This MIDIbox implements a 56-port MIDI matrix/router using a core board and an FPGA-based add-on board together with a set of break-out boards and modules that allow for physically placing your MIDI ports where you actually need them.

midibox_sid_faq

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 12:04:26 +0000

MIDIbox SID FAQ FIXME FAQ is outdated, many details are not matching anymore with the current MIDIbox SID V2 implementation Do I need the most elaborate control surface to get some sound out of my SID? No. Although the dedicated control surface is the optimum solution to control the SID, you can control all sound parameters of your MIDIbox SID from a computer or from a common MIDI controller (although the MIDI controller option has some ergonomic limitations).

user_projects

anonymous@undisclosed.example.com (Anonymous) — Sat, 23 May 2020 16:28:44 +0000

MIDIbox User Projects This space is for user projects and project documentations. Projects don't have to be finished, works in progress should also be linked here! For a complete overview of official projects see the MBHP Projects page!

building

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2014 19:53:12 +0000

MIDIdocs Building a SEQ V4 Forum Discussion Thread - for comments, corrections, or questions about this article If you're new to the MIDIbox universe, you might be a bit confused about how to actually build one of these things. What PCBs and parts you'll need, where to get them, etc.

dseq32

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 May 2008 19:51:31 +0000

DSEQ32 (aka yet another TR clone) is based on the classic TR drumsequencers see trsequencer for more drumsequencer designs Features * 32 step 8 track drum seq, each step has trig/acc/roll * one track can be used as note track for bass sequencing * independant length/tempo divisor for each track, all can be synced to a master track

mbseqdocs

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Summary This page is the main area for documenting everything related to the Midibox SEQ application Documentation * uCapps pages * * * * * * * * …

clock2audio2clock

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jan 2021 01:00:52 +0000

clk2a2clk Midiclock 2 Audio Converter, Audio 2 Midiclock Converter 4 Recording a Midiclock on a Audio-Track on your Multitrack-Recording-Device in order to get the possibility to overdub a sequencer track on Recording Devices without Midi-Clock builtin

protodeck

anonymous@undisclosed.example.com (Anonymous) — Sun, 03 Jul 2016 13:19:15 +0000

ProtoFuse Protodeck Official Website THIS DEVICE IS USED EXCLUSIVELY BY PROTOFUSE AND ISN'T FOR BUYING. Preambule The problem is easy to understand: I wanted to drop my PC keyboard + mouse during live performance in order to be focused on music/sound/live. The only way to solve my problem was to use an hardware to control Ableton Live, but not only that, I need a feedback from it too.

flo

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Oct 2012 06:43:54 +0000

FX looper with MidiBox - Flo www.midibox.org/dokuwiki/flo flo user page ... under construction ... last edit: 2010-04-10 Guitar FX looper with MidiBox WARNING: THIS PROJECT IS IN PROGRESS SO IT IS NOT FINISHED YET! Requirements In General FX Bypass Loopers Multiple true bypass guitar FX loopers in one enclosure.

forum_highlights_misc_projects

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Oct 2010 03:58:25 +0000

MISC MIDIBOX PROJECTS Forum threads and questions about miscellaneous MIDIbox projects. More information can be found at the MIDIBOX PROJECTS WIKI PAGE MIDIbox Clockbox * The MIDIbox ClockBox Thread. * Midi Master Clock?? * Displaying BPM? * Converting Midi clock to BPM?? * Blinking LED? * How do 'ticks' work? * Expanding a clockbox into an Arpeggiator? * Using the clockbox as the basis for an LFO? * Clockbox as metronome? * Changing tick rate to 48ppq?? * Clockbox …

midibox_ay_ym_v2

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 13:26:27 +0000

MIDIBox AY (YM) V2 1.Overview The MIDIbox AY (YM) V2 is stuffed with a single AY-3-8912, an AY-3-8910 or an YM2149 sound chip. This kind of Chip is a 3-Voice Programmable Sound Generators (PSG). This means they have a 3-Voice-Square-Wave (Tone ABC) + one global Noise generator.

antichambre

anonymous@undisclosed.example.com (Anonymous) — Sun, 28 Apr 2019 08:42:07 +0000

Antichambre Projects list * MIDIbox TIA, Atari 2600 Synth. * MIDIbox KPR77, MIDIbox 808 adapted to Korg KPR77 Drum Machine.forum gallery * MIDIbox POKEY, Atari POKEY Synth (2013 work).forum gallery * Djo's MIDIbox DR55, a modified & midified Roland DR55.modular synth * MIDIbox 2069, A module based on the Korg NJM2069, LPF + VCA. * MIDIbox TIA, Cartridge Version.You can also follow the thread on forum. * SEQUATEUR, a versatile controller. * OLRE16, A UI module with 16*Enco…

home

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 14:35:10 +0000

Welcome to the MIDIBox Knowledge Base What is MIDIBox? MIDIBox is a do it yourself custom midi controller solution. You can use the resources on these pages to build your own custom MIDIBox based midi controller. A more thorough introduction can be found here. This knowledge base is a wiki

start

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 14:19:25 +0000

Welcome to the MIDIbox Knowledge Base If you ever wanted to build the midi controller or sequencer of your dreams, or if you want to develop your own, custom MIDIbox - you came to the right spot :) We are working hard to improve the vast amount of information around. If you can help us, please feel free to

wilba_mb_6582

anonymous@undisclosed.example.com (Anonymous) — Sun, 06 Dec 2020 22:07:02 +0000

MB-6582 - MIDIbox SID Synthesizer V2 MB-6582 is a MIDIbox SID synthesizer. If you have no idea what that is, look here: More photos of MB-6582 during construction PCBs and knobs are now available at Modular Addict. For SID chips, PIC chips, panels, and any other parts you're having trouble sourcing, your best bet is to ask around at the forums.

midibox_sid

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 12:56:02 +0000

Overview FIXME Update Things MIDIbox SID synthesizer is a project that uses the classic SID (Sound Interface Device) soundchip from the Commodore C64 personal computer under control of the Midibox as standalone Synthesizer. For specific info on user created designs, please check the

projects

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Sep 2016 13:52:12 +0000

MIDIbox Projects The following devices are built with MBHP modules, running a special MIOS-application. * MIDIbox NG - Midicontroller with encoders, pots, buttons, faders and displays * MB-CV V2 - Enhanced MIDI to CV converter with various modulation capabilities

how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 13:32:29 +0000

How to create custom GLCD fonts/icons/bars for Midibox NG I compiled this tutorial mainly because there aren´t a lot of informations available on this subject and I spent days to figure this out. It requires some amount of work to implement custom fonts and icons in a Midibox_NG, which I will try to guide you through as well as I can. My programming skills are very limited, so there might be better and more efficient ways to do this. So I consider this approach just one possible way.

john_e._finster

anonymous@undisclosed.example.com (Anonymous) — Sun, 11 May 2014 12:14:13 +0000

Midibox Stuff by John E. Finster Hi, my name is John. I live in Germany where I also studied Philosophy and Cultural Sciences. I became aware of TK´s ingenious Midibox Project in 2007 and started to learn how to build my own boxes. My first ones consisted of nothing more than a few pots and buttons, a display and a cardboard box. After a few financial crisis and the birth of our wonderful daughter I was forced to lay low for a few years and to take care of more important issues at hand (jobs, f…

mbhp_genesis

anonymous@undisclosed.example.com (Anonymous) — Fri, 20 Feb 2026 06:51:26 +0000

Summary The MBHP_Genesis module provides all the hardware necessary to support one of each YM2612/YM3438 (OPN2) and SN76489/94/96 (PSG) sound chips and interface them to a microcontroller (including one of the MIDIbox core modules). In addition, the circuit and board are designed so that up to four MBHP_Genesis modules may be stacked on top of each other to run up to four sets of sound chips, with simple pin/socket headers connecting the boards and no additional wiring needed.

scs_pcb

anonymous@undisclosed.example.com (Anonymous) — Sat, 11 Sep 2021 09:09:29 +0000

MIDIbox SCS Standard Control Surface module The SCS module implements a standard user interface that is available as a module in the MIOS codebase. It goes nicely with a 20x character LCD and connects to J10 on the core board. An application example can be found in

aout_ng

anonymous@undisclosed.example.com (Anonymous) — Thu, 15 Mar 2018 17:29:33 +0000

AOUT_NG Introduction The AOUT_NG is a CV (control voltage) output module. It features 8 channels of 12 bit CV out and a selectable bipolar option. This module is an officially supported MBHP module, created by Thomas Stoeckl (Seppoman). Note that the AOUT_NG is not supposed to replace the existing AOUT module. The AOUT will continue to be supported and co-exist with the AOUT_NG. The need for a new design originated from both the high price and the bad availability of the MAX525 DACs used on…

midibox_ay_3_8912_envelope

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 May 2011 17:44:13 +0000

MIDIBox AY V1 - Envelope MIDIBox AY - Envelope Control Menu * Just press F5 to have a look at the MIDIBox AY ENVelope options (@ the MIDIBox AY Envelope User Menu). ::: :: : MIDIBox AY - Envelope Mode: ON/Off AdjustOn or OffENV. Mode Tone A, B or C

project

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Dec 2008 08:08:49 +0000

Official Projects These projects are primarily the work of TK, the founder of the MIDIbox community. Controllers MB64 midibox_64 Pot-based MIDI controller MB64e midibox_64e Encoder and pot-based MIDI controller MBLC midibox_lc Logic Control HUI emulation MBMM midibox_mm MotorMix HUI emulation

lcd

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:36:14 +0000

LCD Module An LCD module isn't an MBHP module, you buy the LCD screen with the PCB attached and driver chips on-board, and that is your LCD module. Here you can find information how to use an LCD with the Midibox MBHP Core module. See also: Troubleshooting LCD Displays

forum_highlights_seq

anonymous@undisclosed.example.com (Anonymous) — Wed, 06 Oct 2010 21:11:13 +0000

MIDIBOX SEQ Forum questions and threads about the MIDIbox SEQ and related projects. More information can be found at the MIDIBOX PROJECTS WIKI PAGE MIDIbox SEQ V3 (PIC based firmware) * MBSEQ as a drum sequencer * Artesias MIDIbox SEQ Blog * Swap Pattern hack for MBSEQ * Half Tempo hack for MBSEQ User Projects MIDIbox SEQ V4 (STM32 based firmware) * MIDIbox SEQ V4 Beta Release and Feeback * MIDIbox SEQ V4 MIDI Out Performance

martinsomerville

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Dec 2008 16:03:23 +0000

081207 - page created location: Australia HOME I was totally new to midibox and electronics and had limited midi exposure. I still have little idea (I will state incorrect info - please correct me by putting your name and the correction beside it).

midibox_seq_v4

anonymous@undisclosed.example.com (Anonymous) — Sat, 22 Apr 2017 15:21:02 +0000

MIDIbox SEQ V4 Documentation uCapps.de Overview Official User Manual MBSEQv4 Beginner's Guide MIDIbox SEQ Forum Instructional YouTube videos by Andrew Scheidler (link to first part) The SEQ V4 is the flagship MIDIbox sequencer. It's really an incredible device. You should build one. Once you've built it, you should buy TK a beer to thank him for developing and constantly improving this amazing thing, and for offering it to the world as a free and open device.

kristal

anonymous@undisclosed.example.com (Anonymous) — Fri, 12 Sep 2014 17:12:07 +0000

O hai! I iz in ur space-time continuum, upsetting all your gravity and quantums and stuffs → → → ---------- Bulk orders → My successfully finished bulk orders: * Albs Waldorf knobs bulk order 2012 * Albs Waldorf knobs bulk order 2013 * Albs Waldorf knobs bulk order april 2013 * Albs Waldorf knobs bulk order fall 2013 * Albs Waldorf knobs bulk order summer 2014 → My upcoming bulk orders: * SEQ4 Aluminium Case and Frontpanel Bulk 2014 * Albs wish list ----------…

linux_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Mon, 30 Sep 2024 20:15:44 +0000

Core Toolchain Setup for MIOS32 application development on Linux Preparation This document assumes that you have a relatively modern x86 based linux distribution. While it may work other distributions, it has only been tested on x86 Ubuntu 10.10. Many of the commands, especially

midibox_speakjet

anonymous@undisclosed.example.com (Anonymous) — Thu, 09 Jun 2016 01:17:44 +0000

MIDIBox SpeakJet MIDIBox SpeakJet Synthesiser is a project that uses the MagnevationSpeakjet controlled by midibox as a standalone synthesizer. The SpeakJet IC was brought to market in February 2004, and is available from a variety of vendors for around $25 USD. From the SpeakJet Web Site:

groupe_paris

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:57:45 +0000

Paris Midibox User Group Cette page présente le groupe d'utilisateurs de Midibox à Paris. * La prémière réunion du PMUG a eu lieu dans un grand enthousiasme le Samedi 1er Mars 2008. La prochaine réunion a été proposé pour le

midibox_sid

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:53:30 +0000

Overview MIDIbox SID synthesizer is a project that uses the classic SID (Sound Interface Device) soundchip from the Commodore C64 personal computer under control of the Midibox as standalone Synthesizer. Info on ucapps.de * Overview uCApps * Control Unit uCApps *

stellax4

anonymous@undisclosed.example.com (Anonymous) — Tue, 06 Apr 2021 21:08:40 +0000

STELLAx4 4x 8Bit Soundchips/TIAś on a 10x10cm PCB, controlled from a STM32F4 Microcontroller dipcoref4, based on Antichambreś TIA Module, with AD9833ś as External programmable Clock, the Frequency-range is expandet... The Board acts a Motherboard, for * 4x Soundchip... AND:

wilba

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:41:32 +0000

---------- Wilba's MBlog Introduction I've been tinkering with MIDIbox stuff since 2003, mostly playing with MIDIBox SID synth, and also started off the MIOS Studio project. I discovered ucapps.de while playing with low-end PICs and MIDI and needing something with more grunt to achieve my own MIDI controller ideas.

start

anonymous@undisclosed.example.com (Anonymous) — Tue, 08 Dec 2020 17:19:28 +0000

MB-SIDR8TR This is a project built around making a MidiBox SID in a 3U rackmount case using the MB-6582 mainboard. This is a huge work in progress however feel free to contribute! You can also follow this project on Github. Parts * 3U Chassis - Jameco Part # 132848

manual

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Dec 2009 05:52:49 +0000

Pedal Box / Pedal Board Home PbX = Pedal Box | PbD = Pedal Board | PB = Both Help can be found in the Pedal Box forum thread Understanding how it works, and what it does PbX and PbD are almost identical, except that PbD uses it's own buttons. Where as PbX uses MIDI Input to replace the buttons. PbX should be used when you already have external floorboard. PbD IS an external floorboard.

midibox

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 05:07:59 +0000

About MIDIbox What is a MIDIbox A MIDIbox is an open-source, non-commercial, DIY, hardware MIDI device. It can perform various functions depending on the firmware that is installed and the hardware that is used. The MIDIbox DIY-projects consist of hardware (MBHP) and software (MIOS Operating System + Application). Some projects have special designed modules, others only require a Core module. Every device needs at least one Core.

lcd

anonymous@undisclosed.example.com (Anonymous) — Sun, 10 Jul 2016 15:05:52 +0000

Midibox LCD Module An LCD module isn't an MBHP module, you buy the LCD screen with the PCB attached and driver chips on-board, and that is your LCD module. Here you can find information how to use an LCD with the Midibox MBHP Core module. See also:

mb-lre8x2cs_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 17 Jan 2013 14:25:31 +0000

IMPORTANT FOR BULK ORDER LATECOMERS ! This bulk order is officialy closed but I have bought some extra PCBs for latecomers. If you want ones, email me (jeromebo at free dot fr) the quantity you would like and your personal informations: * Midibox username

questionable

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:49:40 +0000

Questionable's Midibox Projects History: Several years ago, I started work on an Analogue Modular Synth (still unfinished), which was to include a Midibox Midi->CV component. Like the synth, the Midi->CV was never finished. Recently, I've been getting back into DJ'ing (Traktor) and playing around with visuals (VDMX), and wasn't happy with any of the controllers on the market for those uses. I decided to take another look at creating a Midibox controller, and thus this Traktor project was bor…

stryd_one

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Oct 2007 23:30:55 +0000

stryd_one's MBlog The Home of Southpaw MIDIboxing ;) Introduction Hey MIDIBoxers! Here I plan to blog my progress on all things MIOS from now on. There are two areas I'll be focussing on, for now - stock MIDIBoxes, and a customized sequencer that I have been planning off and on for a couple of years now.

project

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Dec 2008 08:09:43 +0000

hardwareconfig

anonymous@undisclosed.example.com (Anonymous) — Thu, 18 Sep 2014 20:33:47 +0000

MIDIdocs The MBSEQ_HW.V4 File Forum Discussion Thread - for comments, corrections, or questions about this article This file contains configuration information about your SEQ's hardware - button, LED, and encoder assignments, some low level settings, etc. This file has to be in the root of your SD Card in order for the Wilba Frontpanel to work, because without this file, the SEQ core won't know anything about the buttons and LEDS on your frontpanel.

aout_ng

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:59:25 +0000

mb-twinsid

anonymous@undisclosed.example.com (Anonymous) — Fri, 06 Nov 2015 00:49:52 +0000

TWINsid V1.2 - MIDIbox SID Synthesizer V2 Midibox TWINsid is a light midibox sid v2 on three pcb wiht only two sid chip for stereo sound and a dedicated control surface for the clasic parameter TWINsid V1.2 features : The main board pcb integrated :

mb_rgb-led_matrix_8x8

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Aug 2014 18:33:23 +0000

MIDIbox RGB-LED Matrix 8x8 The RGB LED matrix described here can be used to signal feedback to the user, as for example in my MIDI Matrix with 56 Inputs and 56 Outputs. But, it can also be used for fancy stuff, Vegas mode, bling, impressing your neighbours,... Overview The PCB is as wide as the RGB LED modules themselves, with enough space above and below for mounting holes. This means that the modules can easily be chained horizontally in order to create type crawls. If you cut off the to…

midiboxfx_-_midifiying_analog_gear

anonymous@undisclosed.example.com (Anonymous) — Thu, 07 Jan 2021 13:54:00 +0000

Analog/Digital interfacing This page has some ideas on how to mod analog gear, for instance effects and (drum) synths, so that they can be controlled by MIDI, in particular by MIDIboxes. Like the rest of the WIKI this is going to be a living document that is going grow and be modified, until it is complete.. ;)

encoders

anonymous@undisclosed.example.com (Anonymous) — Mon, 13 Jun 2016 17:26:38 +0000

Rotary Encoders FIXME : Update this Page This page is to inform you about MIOS' handling of incremental rotary encoders, or just 'encoders' or 'encs' for short. These are the endless-turning knobs that you can use to set values on your device. These should not be confused with a potentiometer. See the

sensors

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 07:45:36 +0000

Sensors Introduction Here some informations about various sensor-types and how to connect them to a midibox. Keep in mind that most of sensors are analog , so they require an AINSER Module to be plugged as inputs to the Core Board. Sensor-Wiki maintains a free list of possible sensors you could experiment with . For example the picture on the right is a EEG Active Electrode from the OpenEEG Project. A mind-controlled midibox ? who said that ?

user_contest2007

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 Apr 2012 12:40:43 +0000

**MIDIbox Olympic Contest 2007** Hi all of you. Even if this contest is first for the fun, it's a serious competition. The games are organized by “Sound & Breakfast” - a non-commercial but fully official french organisation - , and supported by TK itself, so be sure that if you win, you will be priced as promised.

core

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:03:47 +0000

MBHP Core Module About The mbhp Core Module is the heart and brain of every MIDIbox. It holds the PIC microcontroller which runs MIOS and your MIDIbox application. It handles MIDI communication, it drives an LCD (or two, or more), and it connects all the other modules. The main part of this module is the

alternativesequencer

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

There have been many discussions about alternative sequencer firmware that differs from the MBSEQ as written by TK. So far, only the SID 303 mode has developed into a finished product. Of the others, the vX and the beginner's 16 step have the most active work at the moment.

mb-lre8x2cs_rev4.6

anonymous@undisclosed.example.com (Anonymous) — Fri, 04 Apr 2014 13:55:10 +0000

MB-LRE8x2CS rev 4.6 16 LEDrings / 16 Encoders Control Surface PCB Welcome to the wiki page of the control surface board featuring: * DINx4 module, * Improved DOUTx4 module, * 16 LEDrings of (15+1) LEDs each, * 16 encoders (with or without switch).

midibox_quad_genesis

anonymous@undisclosed.example.com (Anonymous) — Wed, 20 Dec 2017 21:19:40 +0000

Page under construction! Summary MIDIbox Quad Genesis (MBQG) is a homebrew synthesizer project in progress, designed and built by Sauraen and originally commissioned by Josh Whelchel. It runs up to four sets of YM2612/YM3438 (OPN2) + SN76489/94/96 (PSG) sound chips, one set of which roughly comprised the sound generation hardware in a Sega Mega Drive / Genesis. The synth is powered by a STM32F4 core running MIOS32, and is based on MIDIbox hardware and software throughout.

tpd_pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2025 08:36:28 +0000

MIDIbox SEQ Track Position Display module Introduction Based on an original idea by Hawkeye who implemented an 8×8 LED matrix display to show the current track position in his MB SEQ, I designed the TPD module. It does not only provide an enlarged (and duo-color) LED matrix, but also a BPM display and dedicated tempo/BPM encoder, a step display, and four freely assignable buttons with adjacent duo-LEDs for status feedback.

wilba_mb_6582_control_surface_construction_guide

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Dec 2020 15:13:11 +0000

Some preliminary pictures of construction which will be properly annotated in future (as part of my MB-6582 photoset on Flickr): I still have not fully completed the control surface construction guide. I advise people NOT TO SOLDER ANYTHING to the control surface PCB until you read the finished control surface construction guide.

wilba_mb_6582_license

anonymous@undisclosed.example.com (Anonymous) — Sat, 08 Sep 2007 14:36:12 +0000

The MB-6582 PCBs are copyright 2006-2007 Jason Williams and Thorsten Klose. Licensed for personal non-commercial use only. All rights reserved. The PCBs are part of the MIDIbox Hardware Platform (MBHP) and share the same license. Also, the README.TXT in every MIDIbox firmware zip file (including MIDIbox SID V2) contains:

home

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 16:02:58 +0000

Welcome Welcome to the MIDIbox.org wiki! We hope you'll find all you need to know right here. We look forward to seeing you on the Chat or Forum. Feel free to add or correct things. Log in with your MIDIBox forum account to edit these wiki pages. Please consult the

chaos_matrix

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 20:18:52 +0000

Chaos Matrix Introduction Chaos Matrix is a programmer for an Oberheim Matrix 1000 analog synthesizer built by Patrick Manderson. It's capable of manipulating all 126 voice parameters including 10 programmable matrix modulations buses, ramp generators, 5 point tracking generator, 3 five stage envelopes, 2 oscillators, 2 LFOs, and much more.

mb-lre8x2cs_bulk_order_2014

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Dec 2014 21:03:18 +0000

BULK ORDER MB-LRE8x2CS rev 4.6 The time-frame of the bulk order is not still well defined but it should take place in april/may of 2014. You will find the technical informations about the MB-LRE8x2CS rev 4.6 PCB here. I need to know also how much is the interest for:

midiboxlc

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:03:10 +0000

MIDIbox LC The MIDIbox LC is a MIOS based application which emulates a Logic Control / Mackie Control. Overview uCApps MIDIbox LC FAQ (English) | MIDIbox LC FAQ (German) Drive a MIDIBox-LC with 4 LCDs on 1 Core Logic Control User Manual (PDF) The old manual which also contains the MIDI implementation (PDF) Information about Mackie Control Mappings of Mackie Control messages to popular software functions This protocol is supported by a lot of host applications. Last info (report…

pedal_box

anonymous@undisclosed.example.com (Anonymous) — Sun, 19 Jan 2014 10:10:42 +0000

Introduction The Pedal Box was built to be a very basic extension to a floorboard. Giving it an extra 8 Expression Pedals, and a display to see patch change / CC names, as well as their values. It has grown far beyond it's original intention. Pedal Box

what_is_a_midibox

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:20:27 +0000

What is a MIDIbox The MIDIbox DIY-projects consist of hardware (MBHP) and software (MIOS + Application). Some projects have special designed modules, others only require a Core module. Every device needs at least one Core. The normal way to build a MIDIbox MIDI controller or synthesizer is:

midibox_seq_v4l

anonymous@undisclosed.example.com (Anonymous) — Sat, 22 Apr 2017 15:24:21 +0000

MIDIbox SEQ V4 Lite (V4L) uCapps.de Overview/User Guide MIDIbox SEQ Forum MIDIbox SEQ V4 Lite mk.II (An updated SEQ V4L that only needs one ribbon connector to the core.) In addition to reading the V4L User Guide, it may also be helpful to read over some of the MIDIbox SEQ V4 documentation, since the V4L inherits most of its features from the SEQ V4. * The V4L as a MIDI Processor - It's not just a sequencer! The V4L can also be used to process incoming midi signals. All incoming MIDI ca…

applications

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

!!MIDIbox [SID] [ A [synthesizer] based on the famous [SID] chip - now with a complete control surface which supports up to 4 SIDs
The final V1.6 has been released
[(Changelog)|. ---------- !!MIDIbox [SEQ] [ 16 Track Live Step and Morph [Sequencer] + advanced [Arpeggiator]

cubase

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

!!!Info setting up the midibox 16+ and Midibox 16E to control the cubase SX from d_devil_e@hotmail.com * Run the Midibox16.exe to get the scripts extracted in the cubase\scripts\remote Directory (the default path is program files\steinberg\cubasesx… so if your installation is in defferent location specify the appropriate path)

how_to_use_midibox_cv_with_a_dout

anonymous@undisclosed.example.com (Anonymous) — Wed, 06 May 2009 14:23:29 +0000

Midibox CV to extend “DOUTs” Anyone who considers 2 or 8 gates too few, or wants to trigger vintage drum synths/modules (Roland x0x style), may find the existing hardware of the Midibox CV insufficient. The solution is simple. Hardware A dout module is needed, which will be connected to J8 of the coremodule. A doutx4 provides 32 gates/triggers. Some advice at this point: because it will be built without any optocouplers or transistors to protect the DOUT, it is essential not to apply any exte…

midibox_lc

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Aug 2016 17:58:45 +0000

Steven_C started an english MIDIboxLC FAQ a while ago in the forum Updated and translated from the German version By Digineural (aka Dan) Which modules do I need for Midibox LC? * 1x core module with PIC18F452 * 1x graphic LCD (240×64 of pixels) or 2 characters LCDs (2×40 characters) or 2 GLCDS (2x

midibox_lc_german

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:18:18 +0000

MIDIbox LC FAQ Welche Module brauche ich für Midibox LC? * 1x Core Modul mit PIC18F452 * 1x graphisches LCD (240×64 Bildpunkte) oder 2 Character LCDs (2×40 Zeichen) * 4x DINX4 Modul für 96 Taster * 3x DOUTX4 Modul für Ledrings und Leds

sammichfm

anonymous@undisclosed.example.com (Anonymous) — Sun, 13 Mar 2016 16:09:15 +0000

More photos on Flickr. sammichFM Assembly video made by Siempre La Luna (featuring backing track by TK!) The discussion thread where you can read the latest info and post questions about sammichFM kits is here. sammichFM sammichFM was designed to be the “no excuses” MIDIbox FM synthesizer kit - i.e. for all those people who want a MIDIbox FM but consider building it with modules too time-consuming, too newbie-unfriendly and/or too hard to design and construct a control surface.

sammichsid

anonymous@undisclosed.example.com (Anonymous) — Sat, 26 Feb 2022 05:42:05 +0000

The discussion thread where you can read the latest info and post questions about sammichSID kits is here. sammichSID Low-Down sammichSID was designed to be the “no excuses” MIDIbox SID synthesizer kit - i.e. for all those people who want a MIDIbox SID but consider building it with modules too time-consuming, too newbie-unfriendly and/or too hard to design and construct a control surface, and where

windows_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 04 Jul 2012 18:37:27 +0000

Core Toolchain Setup for MIOS application development on Windows Don't forget The QuickStart Guide! It's the quick and easy setup. It will work for nearly everyone. Please note that this page is only for MIOS8. For the more powerful STM32 based MIOS32, please visit

blm16x16_x

anonymous@undisclosed.example.com (Anonymous) — Wed, 23 Mar 2016 00:32:09 +0000

Button LED Matrix (BLM16x16+X) Control Surface uCapps.de Overview MIDIbox BLM Forum The BLM is a button grid control surface with LED feedback that can be used as a controller for the MIDIbox SEQ V4, as well as for the SEQ V4L. The full-size BLM (the “16×16

audiocommander

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Jun 2011 06:12:15 +0000

Welcome to my User Page I searched long for a system I can build upon my musical and artistic artwork - and I am thankful that Thorsten opened this wonderful project and community to us ;) My real name is Michael Markert and I live in Nuremberg, Germany. I studied Communications-Design focused on Multimedia and am currently doing a postgraduated diploma at the College of Fine Arts in Nuremberg (Public Arts, Intermedia). The focus of my work and research is the development of intuitive interact…

core_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 09:55:30 +0000

MBHP Core8 Module Introduction The MBHP Core8 Module is the Original heart and brain of every MIDIbox. It holds the PIC microcontroller which runs MIOS and your MIDIbox application. It handles MIDI communication, it drives an LCD (or two), and it connects to all the other modules

eagle3d_midibox_user_pack

anonymous@undisclosed.example.com (Anonymous) — Sun, 08 Mar 2009 02:55:19 +0000

Eagle3D MIDIBox User Pack Eagle3D from Matthias Weißer New parts tutorial from Félix Chénier 3dusrpac.dat Just copy the code below to your 3dusrpac.dat and user.inc. known packages (not assigned in the 3dpack.dat): HEADER1X2:0:0:0:0:0:0:0:0:0:0:0:0:0:-90:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:PH_1X2(:Stiftleiste 2,54mm Raster 2Pin 1Reihe (pinhead.lib):Header 2,54mm Grid 2Pin 1Row (jumper.lib) HEAD…

how_to_setup_xcode3_to_access_the_svn_server

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jul 2011 14:52:03 +0000

Overview After several failed attempts to use svn applications on OS X Leopard 10.5, I finally discovered that XCode 3 has SVN+SSH capabilities built in and it's very very easy to setup and use. It will even store your passphrase in your keychain which means you will never have to keep typing it in. The only pitfall to this is that if you ever lose your computer, you should notify TK and have your account removed or your password changed immediately so as not to compromise the security of the…

ju_control_roland_alpha_juno_control_panel_cs

anonymous@undisclosed.example.com (Anonymous) — Tue, 19 Sep 2017 12:14:08 +0000

MIDIBox Juno Control (JuCtrl) Project Description The MIDIBox JuCtrl is a Alpha Juno MIDI Controller . It's an additional control surface and MIDI Controller for the Roland Alpha Juno Synthesizer. I started this Project because the original Juno User CS is very minimalistic (80s Style). With the

mb-lre8x2cs_pcb

anonymous@undisclosed.example.com (Anonymous) — Wed, 22 Jun 2016 00:03:22 +0000

MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules with 16 LEDrings and 16 encoders. You can find the tread of the PCB design here. The last revision of the PCB is rev 2.5.

mbhp_acronyms

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:08:46 +0000

This is an overview of abbreviations and acronyms used frequently at midibox.org. Many of these are also useful if you want to program in C or work with the function overview listings of MIOS: Acronym Meaning Description AIN Analog INput A module which accepts input of a Voltage Range (normally 0 to +5 V)

midibox_cv_v1

anonymous@undisclosed.example.com (Anonymous) — Wed, 23 Mar 2016 09:46:35 +0000

MIDIBox CV a MIDI-to-control voltage converter project MBHP Hardware Requirements 1 CORE module, 1 analog output module (AOUT, AOUT_LC, or AOUT_NG), 1 DINX1 module. Recommended: LCD, BankStick. Documentation * MIDIbox CV uCApps Links * how_to_use_midibox_cv_with_a_dout * how_to_use_midibox_cv_with_a_dout_german * How to use an encoder and up/down buttons on the same MIDIbox CV

midibox_fm_21

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Jun 2016 02:30:28 +0000

MIDIbox FM V2.1 See and This is a synth by Sauraen constructed in 2014-2015. It's as finished as it ever will be, but it was never documented for others to try to replicate... until now! Please note that this is still not a complete, well-documented project, and certainly not for beginners. I do not guarantee that all the information you will need is available he…

midibox_sid_tb303_mode

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:03:28 +0000

There is not so much information available about this new mode, which was introduced with v1.7303 (a link to the beta version is published in this forum article: ) Here some first demo samples: (Accent test) (303 mode with external Moog filter)

midibox_snes_apu

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:00:42 +0000

MIDIBox SNES APU What is it? Rough Overview The SNES-APU (or Super Nintendo Entertainment System - Audio Processing Unit) is the module inside the Super Nintendo that handled all the processing and direct playing of music and effects. It consists of a processor (the Sony SPC700), and a DSP all rolled into a stand-alone module that plugs into the SNES via a 24 pin connector.

modules_and_parts

anonymous@undisclosed.example.com (Anonymous) — Tue, 20 Mar 2018 16:37:56 +0000

Modules and Parts * Parts FAQ - Questions and Answers Ordering * Kits & Pre-made PCBs * Parts Suppliers by Country Bulk Orders * Organizing Bulk Orders Running * BLM 16x16 PCB+Case * AOUT Euro Internal Boards Components * Resistor * Capacitor * Potentiometer * Diode * Transistor * Integrated Circuit * Audio Synthesis Integrated Circuit * Quartz Video tutorials Control Surface Components Digital * LED * LED DotMatrix * Switch * …

newbies_project_guide

anonymous@undisclosed.example.com (Anonymous) — Fri, 01 Aug 2008 03:10:09 +0000

The Total Newbie's guide to MidiBox Projects "I want to build a [blank], but I have no idea which modules I need..." ProjectCoreLCDAINx4DINx4DOUTx4BankstickMFSIDAOUT/AOUT LC/AOUT NGOPL3NOTESMidiBox 64 1x 1x 2x 2x 2x 8x - - 1x - -MidiBox 64E

northernlightx

anonymous@undisclosed.example.com (Anonymous) — Tue, 21 Jun 2016 10:28:08 +0000

NorthernLightX's Projects My Own User Projects Power Supply * Overview * This is a general purpose Power Supply Unit (PSU) which outputs +5v, +9v, +12v and -12v, designed by Mendelt and myself. The main reason I wanted a PSU like this was that every C64 PSU brick I touched died on me within a few days. Instead of messing with years-old stuff, I would rather have something new.

parts_faq

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 12:47:58 +0000

Parts FAQ (Frequently Asked Questions) What wattage resistors should I buy? 1/4W (.25watt) or higher will work fine for everything midibox, unless otherwise noted. What voltage capacitors should I buy? The whole MBHP works on 5V, so all Caps should be at about

tools_made_by_midiboxers

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 13:12:43 +0000

MIDIbox Tools Various Midiboxers use their programming knowledge to make programs which are usefull for other midiboxers. If you have made a MIDIbox related tool, post a description and link here! MIOS Related * MIOS Studio is an integrated development environment for MIOS.

wilba_mb_6582_prototype

anonymous@undisclosed.example.com (Anonymous) — Thu, 06 Mar 2008 19:59:22 +0000

---------- MB-6582 (Prototype) These are the wiki pages I wrote about the MB-6582, my MIDIbox SID Synthesizer V2 project. Since there were a lot of people who want the PCBs, and even to make their own identical box, I arranged a bulk order of the PCBs and other bulk orders of the panels and parts. Thus my original

windows_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 01 Jul 2015 10:24:55 +0000

Core Toolchain Setup for MIOS32 application development on Windows The QuickStart Guide still needs to be done. The technical jargon: This is the Core Tools section in a walkthrough on the process of developing MIOS32 Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS32 Operating System. The IDE platform used will be

windows_toolchain_svn

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:41:50 +0000

SVN Client Setup for Windows MIOS Sources are now stored on an SVN server which uses SSH for secure transfers if you need write access. This has many advantages for us, but we may first need to setup a couple of tools. This document will provide a few different options, so don't worry if it looks big and confusing, just follow the steps, you can skip the parts you don't need, and you'll be ready in no time :)

mbhp_acronyms

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:26:46 +0000

Acronyms This is an overview of abbreviations and acronyms used frequently at midibox.org. Many of these are also useful if you want to program in C or work with the function overview listings of MIOS: Acronym Meaning Description AIN Analog INput Input of a Voltage Range (norm. 0 to 5 V)

midibox_fm

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 12:55:53 +0000

MIDIbox FM FIXME Update Things Intro MIDIBox FM Synthesiser is a project that uses OPL3 FM soundchips (found from many old soundcards) controlled by MIDIBox as a standalone synthesizer. Features List 'em Skills / Equipment Required Tools Soldering Hardware What modules do I need?

midibox_sid_tb303_mode

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:33:52 +0000

There is not so much information available about this mode, which was introduced with v1.7303 (a link to the beta version is published in this forum article: ) Here some first demo samples: (Accent test) (303 mode with external Moog filter) (303 mode with internal SID filter)

tb303_mode

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:54:10 +0000

dseq_cs

anonymous@undisclosed.example.com (Anonymous) — Tue, 03 Apr 2007 12:35:21 +0000

Screens On this page you can see renders of all display modes, the upper line remains the same: Mode CS layerBPM current BPMPat current bank/patternTrk edit track numberBt current beat Normal mode Nvl normal velocity Avl accent velocity Note

forum_highlights_fmsynth

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Oct 2010 03:57:15 +0000

MIDIBOX FM Forum threads and questions about the MIDIbox FM projects. More information can be found at the MIDIBOX PROJECTS WIKI PAGE MIDIbox FM * The becoming of a MIDIbox FM

howto_create_a_pcb_english_german

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:43:16 +0000

How to create PCB's Exposure method (english) by dblevine@lindenmedia.com at 16.Oct.2001 in the MIDIbox Forum I'm sorry this took so long; I wanted to take some pictures, but I seem to have misplaced my digital camera? And if anyone finds anything wrong with my description, please tell me!

lemonhorse

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Jun 2008 11:08:15 +0000

Hi, here some stuff of my MidiBox-Adventures: * My first User Project > MIDIbox AY 3 8912 * Midibox AY 3 8912 @ midibox.org Forum > Construction > MIDIbox User Projects midibox.org Forum * Pictures'n Notes Soundmaking and amorous adventure in electronics

macos_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 12 Mar 2014 21:34:09 +0000

How to set up the toolchain for coding MIOS32 apps with OS X steps: 0- install Xcode 1- about the terminal 2- get the mios32 files from the repository server 3- install the MIOS32 toolchain 4- configure the paths 5- other derivatives 1- install Xcode

midibox_pokey

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 11:43:11 +0000

MIDIBox POKEY Q: What is it? A: A synth module for the MBHP based on the Atari POKEY (= POtentiometer and KEYboard) sound chip. It will eventually lead to a synth module like the SID or the OPL3 module. Current Status * MIDIbox POKEY 2 * 11/17/2007: More parts added

seppoman

anonymous@undisclosed.example.com (Anonymous) — Mon, 17 Sep 2007 07:07:37 +0000

Seppoman´s Wiki page Welcome to my Wiki page (under heavy construction...) Modules AOUT_NG SSM2044 PCB New Midibox project(s) Apparat 20 This will be the combination of a MB FM together with an Alesis Metavox vocoder both built into a nice 80ies telephone Apparat 20 construction Blog Der Brat. 3000.

midibox_cv_v2

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 11:15:51 +0000

MIDIbox CV V2 Introduction MIDIbox CV V2 is the successor of MB-CV V1 with focus on digital, high-resolution modulation of CV outputs and an enhanced control surface. Official Ucapps Page Video Demo Control Surface Features * a “Standard Control Surface” (SCS), compatible to various other MIDIbox projects, which gives (a cumbersome) access to all parameters.

etching_pcbs

anonymous@undisclosed.example.com (Anonymous) — Mon, 01 Dec 2008 10:14:11 +0000

launchpadblm

anonymous@undisclosed.example.com (Anonymous) — Mon, 15 Sep 2014 18:05:53 +0000

MIDIdocs Novation Launchpad Button LED Matrix (BLM) Forum Discussion Thread - for comments, corrections, or questions about this article Since firmware version 87, the SEQ V4 supports the use of two Novation Launchpads as a BLM control surface. Two Launchpads form a 16×8+X BLM, and up to four can be connected to make a full

start

anonymous@undisclosed.example.com (Anonymous) — Thu, 27 Jun 2024 04:59:30 +0000

MIDIbox SEQ V4 Beginner's Guide The Beginner's Guide is intended to cover the basic operation and concepts of the MBSEQv4 step sequencer. It does not include instructions on how to make the most out of all the features of the sequencer, or what each of the options on every menu page does, but it does give a good overview for the new user.

bosone

anonymous@undisclosed.example.com (Anonymous) — Tue, 13 May 2008 12:33:15 +0000

Bosone - Alchemy Studio page Hi! i'm an italian midiboxer, hobbyist musician, producer, fan of DIY projects... My first midibox was built in 2000 (i think), it was the very first midibox 16 and it was placed... in a shoebox! when i built the first midibox i knew absolutely nothing about soldering and electronics, and thorsten helper me a lot (thanks again!!!)

cc-looper

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Dec 2020 14:14:20 +0000

CC-Looper CC-Automation Midi Control Change MotionSequencer - for Synthesizer with LEDRINGS Features * 4Midichannels @ each 512Steps X 32th-looprate X 128 CCs * only a few of the 128CC should be used @ once - 4x128xCCs @ 32th is Midi Data MESS and µC Death

c_tips_and_tricks_for_pic_programming

anonymous@undisclosed.example.com (Anonymous) — Thu, 15 Sep 2011 07:14:49 +0000

Arithmetic Calculations * Avoid using multiplications and divisions whenever possible. These complex mathmatic calculations need a lot processing power and (what's even worser) a huge library to be compiled at all. * If you need to multiply with and divide through even numbers like 2, 4, 8, 16, 32

fnp-sid

anonymous@undisclosed.example.com (Anonymous) — Mon, 30 Mar 2009 04:15:57 +0000

fnpSID Module This page is dedicated to Flexinoodle's & nILS' stereo USB implementation MIDIBox SID v2. All information present on and files linked to from this site are © 2009 nILS Podewski. Free for private, non-commercial use. All other rights reserved.

getting_started_faq

anonymous@undisclosed.example.com (Anonymous) — Thu, 07 Jul 2016 00:23:27 +0000

FAQ Getting Started Where Do I Start ? Reading About Electronics Basics could be a good thing. If you already know some about electronics , exploring UCapps might help you in many ways to see what's possible to make with MIDIbox modules Wich Most Basic Tools does I need ?

how_to_use_midibox_cv_with_a_dout_german

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 May 2009 15:55:11 +0000

Midibox CV um dout's erweitern Wem zwei bzw. acht Gates zu wenig sind, oder Vintage Drummer (Roland x0x) Triggern will, wird schnell feststellen, dass er mit der vorhandenen Hardwareausstattung der Midibox CV nicht auskommt. Die Lösung ist denkbar einfach und wird im Folgenden erläutert.

m00dawg

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:26:26 +0000

m00dawg's MidiBox Projects Yo MidiBox Peeps! I just started working on this page, but it will be the future home of the boards and designs I have made over the course of making my own projects. You can also visit my website for stuff regarding my MidiBox projects, other hobbies, and my random blog posts about nothing :)

mbqg_tb_case

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Jan 2024 02:43:28 +0000

MIDIbox Quad Genesis Case designed by Technobreath The case is designed by Technobreath to be easily replicated by the community without requiring much skills or tools. Here you will find a pdf with dimensions and building instructions for a wooden case designed for the MIDIbox Quad Genesis by user Technobreath:

mcan

anonymous@undisclosed.example.com (Anonymous) — Fri, 03 Aug 2018 12:53:45 +0000

MCAN, MIDIbox Controlled Area Network Low cost MIDI(Native) Network using CAN, this is MCAN... ---------- Why? Because we CAN ... ha! I'll stop joking. :) At home I have no space to put my equipment in the middle of the room and maintain an access space behind to rewire the machines for each session. It is boring having to do it every time, especially to waste time and lose inspiration between two takes. For Audio, no problem, I've got a good and very large patchbay. For MIDI I've got…

midibox64e

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 00:02:44 +0000

MIDIBox64E is a midi controlled based on MBHP/MIOS * MIDIbox 64E uCApps * MIDIbox 64E Tutorial uCApps * MIDIbox64(E) Patchmode * Meta Events * Button Overlay DIN register allocation Question from Dan aka Digineural: ---------- I understand that the following is setting shift registers 5-8 to be used for encoders 1-16.

midibox_ay_3_8912_volume

anonymous@undisclosed.example.com (Anonymous) — Wed, 26 Nov 2008 15:10:25 +0000

MIDIBox AY 3 8912 - VOLUME MENU MIDIBox AY 8912 Volume Respectively Amplitude Control: * Press F4 (F3 + SHIFT) FOR THE USER VOLUME MENU ::. TONEUSER VALUECC7(A)/CC8(B)/CC9(C) MIDI VALUEVELOCITY MODEENVELOPE MODE priority 4priority 3priority 2priority 1

midibox_live

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:05:13 +0000

MIDIbox Live What is it? MIDIbox Live is a framework that allows any MIOS programmer (in C) to take complete and automatic control over Ableton Live. It also allows your MIDIbox to be automatically controlled by Ableton Live. What do I need? Ableton Live, a Core32, and some C skills. The programming aspect of it can be pretty easy, and of course you can make it as complex as you want. The first version will be released for Live 7.0.14, and future versions will be upgraded from there. We'…

midibox_vgmplayer

anonymous@undisclosed.example.com (Anonymous) — Wed, 06 Apr 2016 14:42:58 +0000

MIDIbox VGM Player This small synth is a demo of the MBHP_Genesis module (available now from the MIDIbox Shop!). Hardware Features * Supports one to four MBHP_Genesis modules, allowing the user to play that number of VGM files simultaneously (one on each board) * OPN2: supports YM2612 and YM3438 * PSG: supports SN76489 and SN76496 directly, SN76494 with external clock generator

mios_faq

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Oct 2012 06:43:29 +0000

MIOS8 FAQ I plan to build a tiny foot controller, should I use a reduced PIC16F based MIDIbox, or should I use the new PIC18F452 controller? You definitely want to use the PIC18F452, as it is available for the same price. Although MIOS offers mighty functions for much more complex applications, the handling will be much easier for you. Especially because of the

newbie

anonymous@undisclosed.example.com (Anonymous) — Fri, 01 Aug 2008 02:11:54 +0000

At last! It's: MidiBoxing for TOTAL Newbies! This page is intended for those who have figured out that a Midibox really is the answer to all of their dreams and wishes, but so far, have no idea which MidiBox best suits them, or where to start. Mind you, if you've made it this far, then at least you're doing some research.

pickit2

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:47:40 +0000

**HOWTO PROGRAM A PIC18f452 WITH A PICKIT2** This page is here in hopes of helping somone else avoid having to go through what i did in figuring it all out.(--chr0n1c) The Pickit2 USB Programmer WILL generate the required voltages for HVP programming of the chip.

stryd_one_codeblocks

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Oct 2007 23:29:36 +0000

:!: :!: :!: :!: :!: This document has been superseded and is kept for archival purposes only!!! Please see the new version! * Part 1 - Setup the core software toolchain for MIOS application development on Windows - These are the minimal Windows applications you need, to write a MIOS Application in C for your MIDIbox. *

stryd_one_firefox_search

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

FireFox Search Engine Plugin This is the source of a FireFox Search Engine Plugin. It doesn't support sidebar yet, but it does work. Anyone know how to make this sidebar compatible? The favicon for the forum needs to be converted into a PNG too, and hosting needs to be arranged

triggermatrix

anonymous@undisclosed.example.com (Anonymous) — Sat, 08 Jan 2022 06:46:03 +0000

TriggerMatrix V4 The Newest Version is V4 which is documentated here: triggermatrix4 TriggerMatrix V0 The Idea from Retriggering Melodys and Drums from a static drum-sequence, goes (for me) back into 2010, where i realized it via Max4Live: in abletons drumtrack, i placed the SENDER, it triggered via CC the RECEIVERS, the Receivers directly where feedet with Midi-Melodys in there Parent-Track, a basic ReTrigger

troubleshooting

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 13:01:56 +0000

Troubleshooting Have you read the General FAQ? Golden Rules of Troubleshooting Hi, I'm stryd_one. I'm a professional IT engineer who fixes bugs for a living, and I've been hanging around here long time, and seen a lot of bugs come and go.... Here are some tips which would solve 99% of the problems I've seen. I hope that you'll pay attention to these rules, and that they'll help you too!

index

anonymous@undisclosed.example.com (Anonymous) — Tue, 22 Mar 2016 18:28:35 +0000

MIDIdocs A place to put articles, howtos and guides about the MIDIbox universe. These articles are meant to complement the official user manuals on uCapps.de, going into a bit more depth on core concepts, features, workflows and usecases to help users learn more about how to do fun stuff with their MIDIboxes.

firefox_search

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:50:18 +0000

albs_waldorf_knobs_2011_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sat, 05 Mar 2011 08:29:51 +0000

Phunk´s ALBS Waldorf Knobs Bulk Order #1 2011 This is the 1st 2011 bulk order for the ALBS Waldorf Knobs used by Wilba on his famous MB6582. * At the moment you can choose between black/transparent (Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-transparent klar) and

basics

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 09:49:58 +0000

Basics Some basic knowledge of MIDI and DIY electronics will help you in building a MIDIBox. This page will help cover the basics. Getting started * Getting Started FAQ * Troubleshooting * Electronics Basics * Digital Electronics * Introduction to MIDI * Electronics DIY Common Tools * Case and Frontpanels DIY Common Tools * MIDIbox Internal Components * Ordering Parts Soldering * Soldering Tips Prototyping * Etching PCB DIY Midiboxing Softwares

clockbox

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

clockBox v 1.0 – This application sends a MIDI clock and outputs a 24ppqn signal at CORE::J14 from 48 to 255 BPM MIDIbox of the Week (Clockbox and MIDIbox CV by Sneak-Thief) midimasterclock – a master clock that can control different devices, supporting up to 8 Midi-Outs; see: Midi-Master-Clock (german)

coresound

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 15:24:08 +0000

This page will contain all of the information about the Coresound synth link to forum topic: Introduction Coresound is a digital synthesiser module based on the midibox platform. todo: add more info Features * Digital synthesiser for microchip pic microcontrollers

eclipse

anonymous@undisclosed.example.com (Anonymous) — Tue, 17 Jul 2012 00:19:29 +0000

Introduction This page will instruct you to install and configure Eclipse as your MidiBox Integrated Development Environment (IDE). Eclipse is supported on multiple platforms, including Windows, Linux and Mac OS. The long-term goal is for this wiki page to provide instruction for all platforms. As it stands today, these instructions are written for use on the following operating systems:

eusart_bug

anonymous@undisclosed.example.com (Anonymous) — Tue, 09 Dec 2008 21:35:59 +0000

The infamous EUSART bug had been found on a PIC18F4550 during the development of the MBHP_USB_PIC module. Unfortunately it turned out, that many PICs (such as the PIC18F4620) were affected by this bug as well. For detailed infos, how the bug has been found, please read the detailed report at the

gm5x5x5

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Sep 2017 08:42:36 +0000

GM5x5x5 Module BEFORE YOU START SOLDERING CHECK THE ERRATA PAGE This page is dedicated to nILS' standalone GM5 USB-To-Midi PCB. All information present on and files linked to from this site is (c) 2008 nILS Podewski. Free for private, non-commercial use. All other rights reserved.

gm5x5x5_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Aug 2014 20:37:24 +0000

gm5x5x5 PCB Bulk Order This is a bulk order for the gm5x5x5 expansions board (PCB only) as described on the following pages/threads: * Forum thread for this bulk order: www.midibox.org/forums/index.php?/topic/12183-gm5x5x5-bulk-order-2-closing-feb-1st-2010/ * WIKI entry: www.midibox.org/dokuwiki/gm5x5x5 * WIKI pre-bulk entry: www.midibox.org/dokuwiki/gm5_expansion_5x5_board * Forum thread of the pre-order:

gm5_expansion_5x5_board

anonymous@undisclosed.example.com (Anonymous) — Sun, 14 Aug 2011 11:53:17 +0000

!!! UPDATE !!! UPDATE !!! UPDATE !!! The “potential” phase of this bulk order is over. Please refer to the info about the PCB here and the bulk order page here. This page is outdated, please refer to this one: Potential GM5 5x5 expansion board bulk order list

ltc_module

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:24:30 +0000

LTC Module LTC Module can be used to add Midi-thru port to Midibox, to Midi input/output activity LEDs or to connect Midibox to Computer RS232 port used as Midi a interface. * LTC Module uCApps * MIDIbox-to-COM uCApps An easier way to connect to a COMM port would be to follow the

midiboxdmx

anonymous@undisclosed.example.com (Anonymous) — Wed, 25 Sep 2013 12:29:28 +0000

Intro Midibox DMX is a DMX512 compliant controller for Midibox created by Phil Taylor - phil@taylor.org.uk Originally Discussed here Here is a picture of my test system, It is enclosed in an old Strand Tempus 2-12 case (I bought 4 very cheap!). Concept

midibox_ay_cs_led

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 May 2011 17:42:36 +0000

MIDIBox AY V1 - CS LED (wiring) MIDIBox AY CS - Tone LEDs: Tone LED Indication: * Tone [A,B,C] On/Off * Noise [A,B,C] ON/OFF * Fx Option [A,B,C] ON/OFF ::: :: : MIDIBox AY CS - Envelope LEDs: Context: * MIDIBox AY Envelope Control See

midibox_sd_card_sample_player

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 May 2012 21:14:47 +0000

MIDIbox SD Card Polyphonic Sample Player This is a brief description of a project to play back samples in real time from an SD card to an I2S based DAC on the Midibox. It will play a number of samples simultaneously, mixing the output to the DAC, the number of samples depends upon the performance of the SD card.

mnmlcore

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jan 2021 01:30:21 +0000

mnmlCore --at the moment obsolete-- because there is dipcoref4!!! we want to create a small STM32F4 based Board (for example 10x4cm in size), with limited Pins/sockets... FantomXR had made such a thing before, so we start with his working design, and invest some time in it

phatline

anonymous@undisclosed.example.com (Anonymous) — Thu, 07 Sep 2023 19:50:05 +0000

Phatline Electronic&Digital-Live-Musican DIY-man in everything I am really interested Europe, Austria - Katsdorf , born in 1983 take a break and listen to some music When I want to make a track, or do a gig, i want total control of parameters, and I want to move & save them all.

seq4_aluminium_case_and_frontpanel_2014

anonymous@undisclosed.example.com (Anonymous) — Wed, 03 Feb 2016 14:09:10 +0000

SEQ4 Heidenreich Case Bulk 2014 Please use your full and correct FORUM NAME (≠ wiki name!), so I can reach you via PM. Setting up your forum account to send you notification emails when getting PM'd is a good idea, too. Please only edit the list, thanks!

svn

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Dec 2014 23:25:07 +0000

SVN Repository for MIOS8 and MIOS32 projects MIOS8 and MIOS32 projects are stored in a SVN repository. TODO: explain installation of SVN clients for Windows/MacOS/Linux here Optionally search for “svn” in the wiki to retrieve already existing documentation.

tos_-_a_tds_controller_blog

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 22:05:44 +0000

ToS - Traktor Controller Blog The quest * Found uCApps About a year(or more) before this project was started, I accidentally stumbled upon a ucapps'es MIDIBOX Gallery, back then I haven't realized what this was all about(a free code, open architecture, everything on a plate

waldorf_knobs_bulk_order_spring_2014

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Jun 2014 09:56:29 +0000

kristal='s *CLOSED* bulk order for the ALBS/Waldorf knobs This is the Spring/Summer 2014 bulk order for the ALBS/Waldorf knobs used by the MB6582 and the SEQ4. * Forum thread for this bulk order: You can choose from: * Drehknopf DK11-170 A.6/4,5 vertieft (recessed, black), see

wickedblade

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:40:20 +0000

This page is under construction, and I suspect that it will never reach completion, but I'll try to get it the closest possible to completion. August 2009 update: I'm currently implementing (i.e. making) the project. The final design is very close to what I'm describing here, but not entirely. When I finish it and if the results are good, I'll try to do a global update.

wikify

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 03:58:22 +0000

MIDIbox Wiki Instructions This page and the other pages throughout entire wikify:* namespace are just a template. Don't edit these pages. The new pages should be laid out like these. Wiki Syntax The best way to learn the syntax and how it is used in the midibox-wiki is just to study existing pages. The syntax is easy to read and learn.

wilba_mb_6582_base_pcb_construction_guide

anonymous@undisclosed.example.com (Anonymous) — Thu, 03 May 2012 23:38:32 +0000

MB-6582 Base PCB Construction Guide Please read the entire construction guide before buying parts or starting to solder anything. Note that Base PCB revision 1 (the red ones bought directly from me) has a few missing tracks. See the bottom of this page.

wilba_mb_6582_pcbthread

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 Sep 2018 17:35:01 +0000

PCBs and base PCB parts kits ARE AVAILABLE NOW at SmashTV's shop! Modular Addict now carries the PCBs (and knobs!) for the MB-6582 project. “The rest of this page is old and most of it no longer applies. I am waiting for the wiki fairy to come along and tidy it up

wilba_mb_6582_psuopte

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 Sep 2018 17:23:33 +0000

MB-6582 PSU option E With a new source for PCBs, here have been a lot of questions about how to run an MB-6582 from a single voltage source. There are a couple threads in the forums on the topic, but I wanted to add a page to the wiki to make sure new builders see that this is and option.

wilba_mb_seq_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Fri, 02 Jan 2015 16:03:17 +0000

MB-SEQ V3/V4 PCB Bulk Order This list is no longer active. SEQ cs boards are available at my shop: After I finish my MB-SEQ V3/V4, I will run a bulk order for PCBs. THIS IS NOT A KIT!!! This is a bulk order for PCBs and some matching parts.

wilba_midibox_rc

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 23:56:47 +0000

---------- MIDIbox RC Introduction MIDIbox RC is the (draft) name of my MIDIbox Ribbon Controller project. Inspired by the Ztar by Starr Labs, and ribbon controllers (which have been around for ages). The plan is to have four ribbon controllers for the four virtual strings, which will let you play sliding notes easily, like a fretless bass or slide guitar.

pc_editor_manual

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Dec 2009 06:05:25 +0000

Download PBPCE from HERE Errata OK, for a start, i'm not a real programmer, I've never worked in an object oriented envioronment before. This project has served my personal want to learn more about programming. So this is my first ever java application, without any formal training on the subject. It's buggy, cumbersome and lacks the finese of experienced programmers. But it makes working with PB a much more enjoyable experience.

eusart_bug

anonymous@undisclosed.example.com (Anonymous) — Mon, 01 Dec 2008 07:25:51 +0000

hardware

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 14:47:26 +0000

Hardware Troubleshooting LCD Troubleshooting Please see the page lcd_Troubleshooting MIDI Troubleshooting Please see the page midi_troubleshooting After power-on, my MIDIbox sends a lot of random MIDI events, how can I avoid this? Basically there are two reasons which can cause random MIDI events:

16x4blm_pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2025 10:36:12 +0000

MIDIbox SEQ BLM 16x4 Control Surface PCB In order to enhance my MB SEQv4 with an internal 16×4 BLM (Button LED Matrix) I have created the printed circuit board shown in the lower half of the picture below. It has been verified to work and you can find all the information necessary to build one yourself on this page.

ain_module

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Aug 2016 15:46:39 +0000

AIN Module AIN means “Analog Input”. Analog is meant as a range; in terms of voltage this range is normally from 0 to 5 V, in terms of programming this is normally a 10bit value from 0 to 1023. It's quite clear if you see this in contrast to the Digital Inputs (via

bipolar_12v_psu

anonymous@undisclosed.example.com (Anonymous) — Sun, 28 Feb 2010 16:46:02 +0000

A bipolar powersupply with +-12 V For many circuits, especially when using op amps, we need a PSU that delivers +12 V, -12V and ground. The OPL3 module (used by Midibox FM), as well as an AOUT* module in bipolar operation, require a +/- 12 VDC supply. This page will demonstrate different methods of building such a supply.

cv1

anonymous@undisclosed.example.com (Anonymous) — Wed, 10 Mar 2021 13:34:08 +0000

CV-1 CV-Recorder/Looper & CV-Generator Control Voltage Recorder, Looper, and Generator - for a own Eurorack-Line... more in Future! --this picture is the first prototype - pre-Eurorack :-D very-early-version...k Features * A Envelope which can be Recored from an AIN-Source, it can be Editet on Startpoint,ATK-Playbackrate, Decay-Playbackrate

do_it_yourself

anonymous@undisclosed.example.com (Anonymous) — Sun, 16 Mar 2008 03:15:09 +0000

Do It Yourself (DIY) The MidiBox community is very “do it yourself” oriented. Don't be offended by the phrase “do it yourself”, it isn't meant to be rude. Although it is there for good reason. The MidiBox community is all about building your own custom MIDI controller. While many parts are available as kits with the necessary components and printed circuit boards, MidiBox is not about simply buying a pre-built MIDI controller from someone else. The community will not build a MidiBox for money a…

fadercore_-_vlr-8odisp

anonymous@undisclosed.example.com (Anonymous) — Fri, 07 Nov 2014 19:15:55 +0000

Fadercore Standard 220mm wide Modules VLR-8oDisp A PCB for chaning up to 32 OLEDs on 4×8 OLED Modules. It can be connected to the RTPMIDI-CORE-STM32F4 from BEB DigitalAudio. The Thread about that cool piece of Hardware is here: And you can Order his parts directly over his contact formula on the site:

fairlightiii

anonymous@undisclosed.example.com (Anonymous) — Tue, 25 Feb 2014 15:35:09 +0000

Welcome to my Wikipage. You will find technical informations of the 16 LEDrings / 16 Encoders Control Surface PCB: * MB-LRE8x2CS Rev 2.5 PCB here. * MB-LRE8x2CS Rev 4.6 PCB here. * The information of the bulk order of Nov-Dec 2012 (Rev 2.5 PCB)here. *

gslug

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Feb 2012 23:20:40 +0000

Hello, I'm gslug (or Kevin). I only recently stumbled across MIDIbox and am now in the process of collecting parts for an MB6582. Whilst waiting for the last parts to arrive I am attempting to get to grips with Eagle and lay out a PCB for a C64 replacement PSU. My next build will probably be a Midibox CV as I have become rather addicted to collecting vintage analog gear. More to follow once I start building things.

hardsid.dll

anonymous@undisclosed.example.com (Anonymous) — Sat, 02 Apr 2011 20:04:15 +0000

Using your MIDIboxSID V2 with hardsid.dll MIDIbox SID V2 is more than just a synthesizer. Well, it is now atleast, thanks to nILS! He wrote a special DLL-file that makes use of the ASID protocol.... but, what does this mean to us MBSIDV2 owners? It means that we can use our lovely MBSIDV2 as a dedicated hardware sound device when using C64-related software. Yes, it sounds like a really nice idea, and it's even very easy to do now!

howto_program_a_pic

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

How to program a PIC16F87x or PIC18F452 :!: the term programming is used in this context for burning a hex file onto the chip. See what_is_a_midibox if you don't know the difference between MIOS, the bootstrap loader and a MIOS Application. For the MIDIbox project it is

jakes_daddy

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Jan 2007 20:32:27 +0000

Jakes Daddy's Wiki Page Welcome to my Wiki page, and the links to my MIDIBox project(s). About Me A little about me: I am a 35 year old web application team leader for a small company. I've been working in IT since leaving school at 16 (wow, thats 19 years and counting !), and at the weekends I am a semi-pro club DJ. I've been DJing for 13/14 years. I only play clubs or pre-club bars. I started playing vinyl (still got my beloved 1210's

lucem

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Jul 2009 17:37:30 +0000

Introduction This is the place to come when it comes down to my activity around MIDI and midibox. Some random photos of my house, my workshop, projects and whatnot About Über-nerd from Germany, born Jan 1982. Studying computer science, had professional training in high-frequency analog electronics, audio signal processing and digital circuitry. Heavy EAGLE user. Programmer since the age of 8, starting on Commodore 64. Languages include C/C++, C#, Java, Basic, Python, Perl, PHP, assembly (808…

ludovic_drochon

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:18:04 +0000

I'm Ludovic Drochon AKA tatapoum. Please find link to photos of my Midibox realizations. * First Midibox SID Mono SID chip * Midibox SEQ * Second Midibox SID (work in progress) completely stuffed with 4 6581

mb-stella

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:04:17 +0000

MB-Stella The MB-Stella aims to be a 8xTIA synth in 4U Height rack Format with a Step C Control surface based upon an adaptation of TIA Manager Interface The original TIA page is here : TIA Module FrontPanel

midiboxmm

anonymous@undisclosed.example.com (Anonymous) — Tue, 17 Jul 2012 16:37:46 +0000

MIDIbox MM is an emulation of the CM Motormix Original assembler version: Forum article MM V2.0 made with C: Forum article MM V2.0 Download : MIOS8 - Scroll down to C Applications Developers Information from CMLabs.net MotorMix Manual from CMLabs.net Manufacturers Page Feel free to add more informations here

midibox_64

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Mar 2007 22:10:13 +0000

MIDIBox64 is a midi controlled based on MBHP/MIOS * MIDIbox 64 uCApps * MIDIbox 64 Tutorial uCApps * MIDIbox 64 Walkthrough uCApps * MIDIbox64(E) Patchmode * Meta Events * Button Overlay

midibox_audiomatrix

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:04:55 +0000

MIDIbox AM (Audio Matrix) A digitally controlled matrix switched patch router for analog signals. Discussed here Below is a collection of comments from the thread. My goal is to organize them for the project. Concept From Nomical I would like to have/make an audio patchbay (having a yet to be determined amount of ins/outs due to any diy building difficulties) that has the option of routing any input to any output digitally. No hardware switches or anything, just hook up all the ins and ou…

mios

anonymous@undisclosed.example.com (Anonymous) — Mon, 10 Jan 2011 22:10:57 +0000

MIOS Overview MIOS is the Operating System of the Chip. This Page covers MIOS and the BOOTLOADER (or Bootstrap Loader). General Informations can be found in the Intro-Article: what is a MIDIbox. There are two versions of MIOS: The (older) MIOS8, used for MBHP_Core modules equipped with 8bit PIC uControllers and

miosstudio_external

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

MIOS Studio - External Command Buttons

pcd8544

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 16:55:23 +0000

PCD8544 LCDs are very small and providing only a resolution of 84×48. But they are connected via a serial interface with a small number of wires to the MIOS-Core, therefore up to 8 LCDs can be handled by the driver w/o performance loss. It's possible to use three of the displays as KS0108 replacement for MIDIbox LC, but you can also use it with any other MIDIbox

selfservice

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:39:50 +0000

Who am I Hi, this is the Selfservice's Midibox page. My name is Stefano a.k.a DJ Stè and I'm from Italy (so, excuse me for my bad English and feel free to correct me!). I'm studying electronic engineering, I'm a deejay and a d.i.y enthusiast. But stop talking about me, if you are interested go to my

speakjet_application_software_v_0.2

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Apr 2008 23:12:21 +0000

The SpeakJet Control Application Software v.0.2 You should have come here from the Midibox SpeakJet Project. On this page you'll find descriptions of the Application Software kII for the Core Module, that controls the MBHP-IIC-SpeakJet-Module. The SJ Control Application Software provides full access to all SJ-Functions via MIDI!

ssm2044_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 11 Mar 2010 08:38:35 +0000

Dual SSM 2044 PCB Bulk Order This page is about Seppoman's bulk order for the ssm2044_pcb. More information and sound demos can be found here and here. Warning: This is not a suitable project for absolute beginners. The soldering isn't very difficult, but you will need either an AOUT_NG (SMT soldering required), an AOUT module (which needs to be expanded with the bipolar option) or two (!) AOUT_LC modules, or another type of CV source to control this module, in addition to the actual synth (S…

tk_mbseqv4l_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 18 Oct 2012 17:15:03 +0000

MIDIbox SEQ V4L Frontpanel PCB Bulk Order This bulk order is obsolete. The MBSEQ V4L Frontpanel can now be directly purchased at SmashTV's MIDIbox Shop: Check especially the “Low Value Order Page” if you want to save shipping costs (order only the PCBs, and buy the remaining parts in your country)

tools

anonymous@undisclosed.example.com (Anonymous) — Mon, 18 Jul 2016 00:19:36 +0000

Tools & Helpers Tools made by MIDIboxers Design Software PCB * KiCAD Open Source PCB Design - PCB Design Open-source * Eagle PCB - PCB Design FreeWare + Commercial FrontPanel / Case * FreeCad Open Source Technical Drawing - Solidworks like 3D CAD * FrontPanel Designer - Frontpanels making for Schaeffer Concept Drawing / documenting * Inkscape Open Source Vector Graphics - Vector Drawing

trsequencer

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:21:13 +0000

TR like drum sequencer Preamble: The Roland TR or x0x series drum machines of the early '80s, such as the TR-808 pictured above, set a high standard for user-friendly interface design in percussion sequencing. This page documents the defining features of the interface, suggested improvements, and our attempts to reproduce this UI in a MIDIbox percussion sequencer.

waldorf_knobs_bulk_order_2012

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Oct 2012 17:49:47 +0000

kristal='s CLOSED 2012 bulk order for the ALBS Waldorf Knobs This is the September 2012 bulk order for the ALBS Waldorf Knobs used on the MB6582. * Forum thread for this bulk order: You can choose between: * Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-weiß (opaque white)

where_to_order_pre-made_printed_circuit_boards_pcbs_and_parts_kits

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Oct 2018 14:02:08 +0000

Premade PCBs & Kits Put your Website below If you are able to supply PCBs or kits * Modular Addict: located in USA (ships worldwide) - PCBs and other MIDIbox parts. * Mikes Elektronikseite: located in Germany (ships worldwide too) - PCBs, Kits, preburned PIC18F452, Parts...

wilba_albs_waldorf_knob_mega_sale

anonymous@undisclosed.example.com (Anonymous) — Thu, 11 Sep 2008 17:40:29 +0000

WILBA'S SEGA MALE!!! SEGA MALE SEGA MALE SEGA MALE SEGA MALE SEGA MALE SEGA MALE Do you need things? Do you need them NOW!??? Do you have a school project due in two weeks or less? Will you *DIE* without these things? Never fear, Wilba will NOT LET YOU DOWN! (Unfortunately, he doesn't actually know about this (or anything else for that matter) yet

windows_toolchain_notepadplus

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:47:43 +0000

Toolchain NotePad++ IDE Setup for MIOS application development on Windows The technical jargon: This is the NotePad++ IDE section in a walkthrough on the process of developing MIOS Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS C Wrapper but also in ASM. The IDE platform used will be

buildoutbrd

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 21:44:48 +0000

Building the Output Board: The output board has two purposes. It provides 1 to 4 audio outputs from your mixer, and also provides the interface to the MIDIBox. Here is the bare Output board: The outputs: Depending on your board, you may need only two outputs (line mixer) or all four for a “full” mixer with effects sends. You only need parts for the outputs you will use. There are four amplifier channels on this board, labeled OT1,OT2,OT3 and OT4. For a line mixer, just build 1 and 2.

parts

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:34:21 +0000

This is a list of mail order companies of different countries where you could buy the components. The tips where collected by MIDIbox Users in the last few years. Note that I cannot guarantee that these distributors offer the best prices. If you know better shops, just add them here (hey, thats the power of a Wiki!

midimon

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:29:56 +0000

MIDIMON Intro A MIDI Monitor Features Monitors MIDI messages Skills / Equipment Required Tools Soldering Hardware What modules do I need? Adjust List as required: Core Module LCD Module Parts List List of pots, buttons, faders and blah - suggestions on good parts and where to buy them + how to hook them up - links

autotools-skeleton

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:44:11 +0000

FIXME Elaborate and test on all development platforms! Unofficial Method This document is an experiment, not an instruction Newbies, this is not the page you're searching for. Using the AutoTools application skeleton This page describes the use of the autotools-based mios application skeleton.

acsensorizer_02

anonymous@undisclosed.example.com (Anonymous) — Thu, 15 Nov 2007 18:57:33 +0000

AC Sensorizer v0.2 acsensorizer acsensorizer_02 :!: This sensorizer project (version 0.2) uses an outdated GUI. There will be no further developments; instead go and build the new ACSensorizer - there have been made major improvements in the GUI/HUI

acsensorizer_04

anonymous@undisclosed.example.com (Anonymous) — Wed, 02 Dec 2009 07:41:19 +0000

AC Sensorizer v0.4 acsensorizer acsensorizer_04 Description AC Sensorizer sensorizes up to 8 sensors and interpolates its AIN-readings. The main target of this application are sensory devices delivering not exactly 0 - 5 V, like pressure-, distance-, resistor-based sensors or softPots.

aout_lc_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 23:46:46 +0000

AOUT_LC Module Introduction The idea behind the AOUT_LC module was to realize control outputs with parts that are easy to get in most countries. After a discussion with Karl Dalen about the difficulity to find DIY friendly DACs with a serial interface. He proposed these

application_development

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 00:02:20 +0000

Developing Applications for MIOS Developing custom applications for MIOS-driven Pic-Chips is very easy and straightforward: This page covers the APPLICATION part as seen above. When coding your app in C, the compiler will automatically include when necessary, the MIOS-enhanced

arkade

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Jul 2016 01:54:43 +0000

MB Arkade Introduction Arkade is a MIDI controller that embeds pairs of everything :-o : * A pair of analog joysticks coming from a canibalized PS2 gamepad ^_^. They center when you release them (+ they're rock solid !) * A pair of standard analog joysticks (positions doesn't change when released)

crystals_and_oscillators

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 13:47:54 +0000

Crystals and Oscillators FIXME : Update this section like the others Here you'll find information on the crystals and oscillators used in various MBHP projects. You'll also find information on what you can do if you can't find the right crystal or oscillator.

dip

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Dual Inline Package. DIPs can be installed either in sockets or permanently soldered into holes extending into the surface of the printed circuit board.

eagle

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 00:54:58 +0000

Eagle PCB Design Software Summary 1. Introduction Eagle is a proprietary Computer Assisted Drawing (CAD) software for designing Printed Circuit Boards (PCBs) from Schematics to Gerber Files. This is the software that have primarily been used to design the MBHP PCB modules. It has limitations on PCB size on the freeware version.

forum_highlights_parts

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Oct 2010 04:01:01 +0000

MIDIBOX PARTS Questions Asked on the forums regarding MIDIbox parts and components. For more information, visit the WIKI's PARTS PAGE Encoders Faders Buttons LEDs

forum_netiquette

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

**Please** Please, follow these steps before posting: The link to this page is also a decent way to give hints for posters, that may (willingly or unwillingly) disrespect these roules: Note from audiocommander: if you got a project related question, please post to the forum rather than sending TK private messages or emails. Donations to the development and the hosting of this website are very welcome (and needed for the community), but: it's just another way to say thanks and no guarantee or

frailn_ay-3-8912_mini_sale

anonymous@undisclosed.example.com (Anonymous) — Fri, 15 Aug 2008 16:18:37 +0000

FRAILN AY-3-8912 MINI SALE CURRENT STATUS CURRENT SALE IS CLOSED. I will not run another one since my supplier's prices have gone up. If you missed out on this sale and are interested in purchasing AY-3-8912 chips, you can go to the following site:

jack

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Feb 2017 12:13:42 +0000

Jack MIDIBox Blog Tools & Environments * Eagle MIDIBox Library * Eagle3D MIDIBox User Pack

kongatrigga

anonymous@undisclosed.example.com (Anonymous) — Fri, 07 Feb 2020 05:12:35 +0000

Konga Trigga Konga > Mic > Preamp > Schmitt Trigger > uController + KeyboardNotes Input = Drum Triggerd Notes Introduction Features - convert Microphone - Pulses to Midi-Drum/Melody-Retrigger read also: Forum-link Hardware Requirements PCB: * Audio PCB

layout_improvements

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 16:04:33 +0000

Important Notes about new PCB designs The aim of this page is to give the community the possibility to publish improved layouts of MBHP modules. The original layouts by TK are mostly quick solutions with focus on “first-time-right”, and therefore not very well optimized with regard to area size or number of bridges.

legalstuff

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Sep 2008 16:23:33 +0000

License: The MIDIBox Mixer project is free for non profit use only. The hardware and software and any device that incorporates it may not be sold without express written permission from the author. If you want one, you'll have to build it yourself. If you sell this product, you are in violation of this license.

mb-digiroland

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:06:05 +0000

MIDIbox DigiRoland Project Introduction The Midibox EuRoland project aims to be a 4U Re-Edit of Analog Drum Parts of Roland TR Drumachines designed to fit in the Eurorack size Format, to be driven trought MIDI or CV. It's the Merging of these projects:

mb-resynth

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:03:39 +0000

MIDIbox ReSynth Project Introduction The Midibox Eurosynth project aims to be a 4U Re edit of MIDIbox synths with advanced Control Surfaces running with a Core32. It's the Merging of 3 existing projects: * MB-FMX2 * MB-STELLA * MB-EuroSID Community users working on it

mbhp

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Oct 2018 15:46:44 +0000

MBHP: The MIDIbox Hardware Platform The hardware of all MIDIbox projects can be assembled in a modular way. Some projects have special designed modules, others only require a Core Module. Every project needs at least one Core. Modules Overview

mbhp4066

anonymous@undisclosed.example.com (Anonymous) — Fri, 28 May 2010 21:07:16 +0000

The MBHP_4066 Board For MIDIfying old analog Sound gear You'll need bilateral switches in some cases. In my case I needed more than 100 of them! For that reason (and with the engaged support of nILS and PCB Mike) the MBHP_4066 board was created.

mb_2069

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Nov 2017 12:10:49 +0000

MIDIbox 2069 A Module based on Korg Music Voicing System NJM2069. The IC NJM2069 First some words about the chip. Some of you already know it. It's present in some KORG products from the 80s, in Analog Hybrid Synths like the DW and EX series, DW-6000, DW-8000, and the Poly800

midibox64_e_patchmode

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

MIDIbox64, MIDIbox64E and MIDIbox MF offer an alternative “patch mode”, which changes the data organisation within the snapshot memory (internal EEPROM and external BankSticks). This mode has been optimized for saving and restoring sound setups of synthesizers or other MIDI devices. In difference to

midibox_arp

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 15:03:46 +0000

MIDIBox Arp A standalone arpeggiator for MBHP. This first release is supposed to be a base for a future powerfull arpeggiator !! :) The features * it read incoming notes, (and forward the rest) * Sort and hold notes in a 32byte buffer. (is it big enough ?)

midibox_ay_3_8912_board

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 13:25:12 +0000

MB AY (YM) Boards Obtain PCB's The AY 3 8912, YM 2149 and the Mixer PCB are available at Mikes Onlineshop CORE8 <-> AY (YM) (pdf) * [AY 3 8912 & YM2149 PCB Interconnections] AY 3 8912 board AY 3 8912 board PCB Layout+Parts List: * mbAY38912.pdf * mbay38912pcbpartlistv1.txt YM2149 Board YM2149 Board Parts list

midibox_ay_3_8912_cc_list

anonymous@undisclosed.example.com (Anonymous) — Mon, 29 Mar 2010 11:23:55 +0000

MIDIBox AY 3 8912 - Controllers * CONTROLLER 01 - ENVELOPE SHAPE CONTROL: * CC1 Value 000-015 dec. => ENVELOPE SHAPE down * CC1 Value 016-023 dec. => ENVELOPE SHAPE up down * CC1 Value 024-031 dec. => ENVELOPE SHAPE down continue * CC1 Value 032-039 dec.

midibox_ay_3_8912_fx

anonymous@undisclosed.example.com (Anonymous) — Fri, 24 Jul 2009 10:50:43 +0000

MIDIBox Fx Option The MIDIBox Fx Option (special sound effects option) is needed for more complex sound creation. With the MIDIBox AY Fx Option it is possible to do timed sound modifications. Concept: You can enable the Fx Option via the MIXER MENU

midibox_ay_3_8912_mixer

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 May 2011 18:13:13 +0000

MIDIBox AY 3 8912 Mixer * OP AMP Mixer (Tone ABC) for the MIDIBox AY 3 8912 (Ver. 1a) Notes: * Pot R4 (Volume Tone A), R5 (Volume Tone B) and R6 (Volume Tone C) are designed for volume finetuning (not for turning off tone A/B/C) Pot Options:

midibox_ay_3_8912_tune

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jul 2009 20:23:22 +0000

MIDIBox AY 3 8912 - DETUNE MENU MIDIBox AY 3 8912 - USER (DE)TUNE MENU * Press F2 (F1 + SHIFT) TO VIEW THE USER (DE)TUNE MENU OPTIONS ::. TONECOARSEFINECH. A-7 to +8-127 to +128CH. B-7 to +8-127 to +128CH. C-7 to +8-127 to +128 A positive offset means to increase the frequency of tone A, B, or C.

midibox_ng

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 12:54:51 +0000

MIDIbox NG FIXME Update Things Hardwareinfos: Usermanual:

midibox_pokey_2

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Sep 2016 07:48:15 +0000

MIDIBox Pokey 2 Many years ago, back in 2007, nILS began his work on the MB-POKEY which is documented here on the Wiki and on the Forum New projects came along that he maybe found more interesting, so now we have picked up from where he left to at least continue the work a bit further.

midi_interface_blacklist

anonymous@undisclosed.example.com (Anonymous) — Fri, 12 Jun 2015 15:16:48 +0000

To find midi devices known to work check the midi_interface_whitelist. Problems with SysEx transfers have been noticed with following MIDI interfaces: Vendor Model notes Access Virus TI Polar :?: Works unreliable for SysEx transfers under OS X (10.5). Suspected SysEx filtering. Plain MIDI sending/receiving seems OK.

midi_specification

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Oct 2012 06:42:27 +0000

MIDI Specifications If you'd like a simplified explanation, see here... Otherwise this page contains some more technical info. MIDI is a standardized way for the communication between musical devices. It specifies the physical interface as well as the transmission protocol. There are different types of MIDI messages, for a full list please follow the links below.

mios_pic18f4685

anonymous@undisclosed.example.com (Anonymous) — Fri, 11 Apr 2008 14:17:50 +0000

PIC18F4685 - one of the Future Microcontrollers for memory intensive Applications A special variant of MIOS is available for the PIC18F4685. The usage of this processor is (currently) only required for the next major step of MIDIbox SID (V2), most other projects are running fine on a PIC18F452

msq-cc-lre-v2

anonymous@undisclosed.example.com (Anonymous) — Thu, 07 Sep 2023 22:00:11 +0000

MSQ-CC-LRE V2 MotionSeQuencer for ControlChanges for 2xLRE8x2 Boards for 1x LRE5-LCD2 Boards Synth-Patch-Editor & Motion-Sequencer 4 ControlChange (= CC-Automation) Introduction Controls and automate a Nord Drum2 (Drum-Synth )NORD DRUM 2 It acts as: -

power_supplies

anonymous@undisclosed.example.com (Anonymous) — Wed, 29 Jun 2016 00:05:01 +0000

Power Supplies Find Here some schematics for DIY Power Supplies. It could help to power your midibox ! :!: Be Aware of high voltages! - Stay Safe ! :!: +5V DC / +9V DC / +12V DC 5V Parts List Description Type Qty Designation LM7805

rasmus

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 12:15:19 +0000

HD24 Remote The idea with this box is to be able to do fast and precise positioning of the Alesis HD24 in combination with the LRC Files:

rio

anonymous@undisclosed.example.com (Anonymous) — Wed, 07 Mar 2007 15:12:18 +0000

Hello everybody I want say hello to all midibox members and will be use this section to introduce my own build ups and developments here... MIDIBox SpeakJet K64 Modul MIDIBox SpeakJet K64 Modul

scratchcontroller

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Jul 2016 01:46:35 +0000

MB-Scratch Controller By Rasteri Introduction : DJ Controllers Issue MIDI DJ controllers generally come with “JOG” wheels, designed to allow the user to move through the track in a similar fashion to vinyl. These wheels are unfortunately nowhere near sensitive enough for scratching. In addition, the crossfaders included in such controllers are usually of low quality and/or too stiff to allow quick cutting.

siliconheaven

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Aug 2014 20:54:02 +0000

February 20, 2013 GM5 Chip Interest page! NO PCB“S! THIS IS NOT A BULK ORDER! This is only to show your interest in purchasing the GM5 chip and hope someone with more bulk ordering experience will take over. I am only trying to show sellers we have enough interested buyers in waiting.

simple_midi_specification

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:21:48 +0000

Visit www.midi.org for the official midi specifications, but it's all in binary. Here's an explanation in hex, as that's what's used by midibox. Also, what I call a 'Command', Midibox refers to as the 'Status byte“. I think 'Command' makes things more understandable.

speakjet_application_software_v_0.1

anonymous@undisclosed.example.com (Anonymous) — Tue, 17 Apr 2007 14:21:13 +0000

The SpeakJet Control Application Software v.0.1 You should have come here from the Midibox SpeakJet Project. On this page you'll find descriptions of the Application Software kII for the Core Module, that controls the MBHP-IIC-SpeakJet-Module. The SJ Control Application Software provides full access to all SJ-Functions via MIDI!

speakjet_breadboard_construction

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 07:56:34 +0000

SpeakJet IIC Module Construction * Official Ucapps IIC SpeakJet Module Page uCApps 1. Introduction There are currently no etched boards or etching layouts available. But here's a detailed plan for a breadboard. Soldering that shouldn't take longer than soldering a premade one. Download the PDF plan from below to get started, it contains also a list of needed parts. If you have FreeHand, you should definitely also download the source, because you can switch the visibility of layers. Howev…

speakjet_dev_archive

anonymous@undisclosed.example.com (Anonymous) — Thu, 15 Mar 2007 00:41:05 +0000

This is an archive for outdated plans and software versions for the midibox speakjet project. :!: Do not use these files unless you know why! SpeakJet-IIC-Module Breadboard v1.0 * Preliminary Breadboard with lowPassFilter (PDF, 480 kB) * Preliminary Breadboard with lowPassFilter (FreeHandMX sourcefile with a lot of nice electronical symbols, 292 kB)

ssm2044_pcb

anonymous@undisclosed.example.com (Anonymous) — Wed, 22 Jun 2016 00:25:45 +0000

Dual SSM 2044 VCF SSM2044 PCB Bulk Order Warning: This is not a suitable project for absolute beginners. The soldering isn't very difficult, but you will need either an AOUT_NG (SMT soldering required), an AOUT module (which needs to be expanded with the bipolar option) or two (!) AOUT_LC modules, or another type of CV source to control this module, in addition to the actual synth (SID/FM) you want to use it with. So a bit of soldering experience and knowledge about the MidiBox platform is def…

stryd_one_preparation

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Jun 2016 22:58:12 +0000

TODO : Finish to split that page in other sections Software Development Please see the toolchain setup docs for info on the software I use: application_development Hardware This part has moved to other sections Lab Supplies A few handy things to have around the lab for experimenting

stuartm

anonymous@undisclosed.example.com (Anonymous) — Tue, 09 Mar 2010 14:45:52 +0000

Hello there! I'm into MIDIbox since 2007, with now a MBSeqV3 and a MB64 completed. MIDIbox 64 "StuKontrol" I'm writing a report about the building of my MB64, now called “StuKontrol” Building the StuKontrol MIDIbox Sequencer V3 I made some videos of using the sequencer: (to be added)

stuartm_stukontrol

anonymous@undisclosed.example.com (Anonymous) — Sun, 03 Jul 2016 13:05:57 +0000

StuKontrol - a MIDIbox64 project Idea and Development Background The idea to develop the StuKontrol is based on my first experiences using a MIDI controller to control Ableton Live in Session View to “perform” tracks in a live way. This first approach was with the Evolution UC-33, which had 8

using_pic18f4620

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 12:14:22 +0000

Using the PIC18F4620 or PIC18F4520 FIXME This is really outdated!!! Historically, MIOS was developed to run on a core module stuffed with a PIC18F452. Recently, the PIC18F4620 has become available. It is near code-compatible with the 452, but features a significant increase in RAM/EEPROM/Codespace. See

waldorf_knobs_bulk_order_2013

anonymous@undisclosed.example.com (Anonymous) — Sat, 09 Feb 2013 12:25:13 +0000

kristal='s 2013 **CLOSED** bulk order for the ALBS Waldorf Knobs This is the 2013 bulk order for the ALBS Waldorf Knobs used on the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from: * Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-weiß (opaque white)

waldorf_knobs_bulk_order_april_2013

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Apr 2013 14:26:22 +0000

🙆 kristal='s CLOSED April 2013 bulk order for the ALBS Waldorf Knobs 🙆 This is the April 2013 bulk order for the ALBS Waldorf Knobs used on the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from: *

waldorf_knobs_bulk_order_fall_2013

anonymous@undisclosed.example.com (Anonymous) — Wed, 23 Apr 2014 10:32:02 +0000

kristal='s CLOSED Fall/Winter 2013 bulk order for the ALBS Waldorf knobs This is the CLOSED Fall/Winter 2013 bulk order for the ALBS Waldorf knobs used by the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from:

windows_toolchain_codeblocks

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:41:25 +0000

Toolchain Code::Blocks IDE Setup for MIOS application development on Windows The technical jargon: This is the Code::Blocks IDE section in a walkthrough on the process of developing MIOS Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS C Wrapper but also in ASM. The IDE platform used will be

windows_toolchain_quickstart

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Apr 2013 18:11:14 +0000

Quick Start Guide Toolchain Setup for MIOS application development on Windows Most users just want to download the source, configure the code for their hardware, and compile it. If that’s you, and you’re familiar with Windows, the Quick Start Guide will get you up and running, quick and easy. If you have any problems, or want to know all the gory step-by-step details, you may prefer the

about

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:28:08 +0000

What is a MIDIbox What is a MIDIbox Acronyms MBHP Acronyms Skills skills FAQ FAQ - Questions and Answers ucApps.de uCApps.de

midibox_kb

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Mar 2016 10:17:46 +0000

MIDIbox KB Hardwareinfos: Key calibration (written by user FantomXR) As I work a lot with keybeds from Fatar and I was looking for an electronic that work with it I found MIDIbox to be the best solution for me. I had a bunch of different keybeds in my hands and I noticed, that some keys are more sensitive than others. So I asked TK to implement a calibration-mode to overcome this issue. With the calibration-mode it is possible to adjust the slowest-delay…

purpose

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Sep 2008 16:28:50 +0000

Project Overview: The MidiBox Mixer The MBMixer project was designed as a replacement for an old stereo line mixer that I built a few decades ago. It has served well, but the pots get old and scratchy, and it just seems so “old fashioned” to have to reach around the front of the rack to adjust the volume. So I decided to design a replacement that could never get scratchy pots, and maybe even add remote control by MIDI. After a bit of research, the PGA4311 chips were looking very promising. Sinc…

test_page

anonymous@undisclosed.example.com (Anonymous) — Sun, 09 Jan 2011 21:48:20 +0000

Content This article describes the functionality of the DIN-module. This module is part of the MBHP and provides digital inputs to a MidiBox device Additional Info FIXME This article needs to be reworked

about

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:28:44 +0000

What is a MIDIbox What is a MIDIbox Acronyms MBHP Acronyms Skills skills FAQ FAQ - Questions and Answers ucApps.de uCApps.de

basics

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:23:18 +0000

Basics Some basic skills and knowledge of MIDI and DIY electronics will help you in building a MIDIbox. These links will help cover the basics. Getting started * Getting Started with MIDI, Electronics, Microcontrollers and Programming * Things you'll need for DIY * Where to buy MIDIbox parts and components * The Troubleshooting page References references Component Codes * Resistor color code decoder - An online visual Resistor color code converter

usingblm

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2014 13:39:54 +0000

MIDIdocs Using the Button LED Matrix (BLM) Forum Discussion Thread - for comments, corrections, or questions about this article I've written the article below based on the 16×8+X Novation Launchpad BLM implementation, but whichever BLM you're using, the interface works more or less the same way. There are many other BLM options - you can build a hardware BLM, you can use an iPad with the Lemur BLM Emulator, or you could use the Windows/MAC/Linux BLM emulator software.

acsim_mios_h

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:47:49 +0000

This page is part of the mios_c_simulator_-_debugger ACSim_console.h ACSim_console.c ACSim_mios.h ACSim_mios.c ACSim_toolbox.h ACSim_toolbox.c ACMidiDefines.h This code is for viewing only and may not be up to date. You can download the files in a zip file . If you make any updates, please send them to stryd_one and he will update the zip for you. /* * ACSim_mios.h * v 0.0.7 * * 2006 April 06 Created by Michael Markert, http://www.audiocommander.de * mios simulator hea…

ainser8_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 23:51:25 +0000

AINSER8 Module Introduction MBHP_AINSER8 is a Reduced version of the MBHP_AINSER64 module without 1-to-8 multiplexers and on-board VR, and only supported by MIOS32! It is based on the 8-channel ADC MCP3208 from Microchip. It can be used to scan pots and/or faders with 12bit resolution between 0 and 5V.

ainser64_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 09:43:51 +0000

AINSER64 Module Introduction MBHP_AINSER64 is the successor of the MBHP_AIN module, and only supported by MIOS32! It is based on the 8-channel ADC MCP3208 from Microchip and 8×4051 multiplexers so that up to 64 analog inputs are available. They can be used to scan pots and/or faders with 12bit resolution between 0 and 5V..

arumblack

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Sep 2008 17:28:15 +0000

ArumBlack's User Page I'm going to try to figure out this wiki thing and post some of my work here. Wish me luck. Stock Projects MB SID I'll try to dig up some pics of this, my first midibox. it is currently being cannibalized for other projects.

audio_synthesis_integrated_circuit

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 19:37:47 +0000

Audio Synthesis Integrated Circuit Most of the audio synthesis integrated circuits used in MIDIbox project are some Programmable Sound Generators. This means that you send binary data as input to have analog audio output Reference Datasheets / Programming Manuals

bad_solderings_gallery

anonymous@undisclosed.example.com (Anonymous) — Wed, 13 Dec 2006 08:39:16 +0000

This gallery shows some pictures of bad solderings - they should prevent you from making the same errors (feel free to add even more pictures here!) 1: The core module has some badly soldered connections(loose), which could lead to failures. There are also missing solderings (e.g. 33pF cap below crystal). It makes sense to solder each pad again, the

best_art_design_midibox

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:36:54 +0000

Best Art/Design MIDIbox price : 1 CORE KIT rules: The most beautifull MIDIbox. Your creativity will be take into account, so don’t copy an existing design. Here we don’t care about electronics. It’s a section realy important for me, I consider that even an electronic project can become an Artwork

best_recycled_midibox

anonymous@undisclosed.example.com (Anonymous) — Wed, 14 Feb 2007 18:01:02 +0000

Best recycled MIDIbox price : 1 CORE KIT rules: Here is the section for those who have build MBs with a lot of ripped components and refurbished gear. Your project have to prove that we can do great box with a little amount of money but some patience and DIY way of thinking, I think you won’t win if you unmount an original Logic Control to build a MIDIbox LC

best_song_produced_with_midibox_gear

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:43:02 +0000

Best Song produced with MIDIbox gear for the fun, not prized. rules: For all the song done with MIDIbox gear. Explain clearly which parts are played by the MB gear and what you use as “third party” stuff. This section is not prized, but I can propose to make a mixing/mastering of the winning song with the gear of the Sound & Breakfast studio, but first I’m just a sound technician mainly working for live scene, and not true a studio engineer, secondly, even if there is now more pro gear in th…

best_user_application

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:33:03 +0000

best user application PRICE: 4 CORE and 4 SID modules (SIDs and PICs, DIN/DOUT, IIC modules are not included, and the best: they are blotted with original fingerprints of TK! ;-) ): rules: The “best user application” section is for those who have programmed something new for the

best_user_patches_librairy

anonymous@undisclosed.example.com (Anonymous) — Sat, 08 Aug 2009 02:59:39 +0000

Best User Patches Librairy for the fun, no prized. rules: Publish here your Patches Librairy for the MIDIbox FM and SID based Synths. Sounding great and well documented. For the SIDs librairies, it’s better if your do a version for each config (1,2,3 or 4 SIDs and different chips versions).

din

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

The diode is an electronic component that allows the passage of current in only one direction. They are solid state semiconductor devices and typically need more than 0.6 volts to operate. In a normal diode, current flows from the positive anode to the negative cathode. Early diodes were in reality, vacuum-tube rectifiers, consisting of an evacuated glass or steel envelope containing two electrodes—a cathode and an anode. Because electrons can flow in only one direction, from cathode to anode, t…

din_module

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:23:32 +0000

DIN Module General Informations A DIN module is used to connect buttons and encoders to the Midibox. The Name comes from “Digital Input” and means that the module can detect two states: ON or OFF. * DIN Module uCApps * DIN & DOUT Pintable * Encoders * din board parts list Connection to Core Module

dipcoref4

anonymous@undisclosed.example.com (Anonymous) — Mon, 28 Dec 2020 07:39:11 +0000

dipCoreF4 A reduced Core for your MIDIbox App, an STM32F405RG in a DIP40 format. Features * MIOS32 uses same processor family and drivers(no deep change). * Same internal hardware as Disco or wCore (speed, memory, peripherals, etc...) . * Board pinout and package compatible with a MIOS8 PIC

dj3nk

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Sep 2008 11:03:54 +0000

Hello my name is dj3nk. many of you will think my nick has something to do with “deejaying”. hmmmm, not directly. I'm also hobby dj but its my “call name”, a short version of my familyname. so who has made this page ?? it's “de Jenk”. So enough of my nick coming to my (coming) midiboxes:

dougwellington_marquardt_switch_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sat, 27 Dec 2008 22:59:31 +0000

Marquardt 6425 Series Switch Group Buy This bulk order is for Marquardt 6425 series switches. These are the same switches that are used in the Monodeck II. You can see details of these switches at Marquardt Tact Switches Web Page. I ordered some samples of these switches - you can see some pictures at my

dougwellington_mb6582_panels

anonymous@undisclosed.example.com (Anonymous) — Mon, 14 Feb 2011 05:49:41 +0000

MB-6582 Panels NEWS - February 2011 Sorry guys, this has been the worst two years of my life. What with my teenage daughter (who is now away at university, yay!!!) losing her brain, my son acting out and getting bad grades, my mother moving to Tucson, and my father-in-law being diagnosed with and dying from pancreatic cancer, well, optional things like MIDIbox projects got put on hold indefinitely.

drive_a_midibox-lc_with_4_lcds_on_1_core

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 00:00:17 +0000

Driving a MIDIBox LC with 4 LCDs on 1 CORE The idea was to drive a LC with 4 (2×16 characters) LCDs to have the optimal spreading of the names & values on the 8 Channels, so use for a pair of 2 Channels 1 LCD ;) How to connect !! IMPORTANT NOTES !!

fadercore_-_vlr-3x8but

anonymous@undisclosed.example.com (Anonymous) — Mon, 28 Jul 2014 07:31:59 +0000

Fadercore Standard 220mm wide modules VLR-3x8But A PCB to add 24 Buttons with RGB LEDs for each. Eagle Files: BOM BIll of Material Allways look for the cheapest seller, the Price may vary heavy!!! And look for Local dealers preferred.

fadercore_-_vlr-8enc

anonymous@undisclosed.example.com (Anonymous) — Sun, 27 Jul 2014 21:23:16 +0000

Fadercore Standard 220mm wide modules VLR-8Enc A PCB to add 8 Encoders with LED ring for each. Eagle Files: BOM BIll of Material Allways look for the cheapest seller, the Price may vary heavy!!! And look for Local dealers preferred.

fadercore_-_vlr-8x16ledmeter

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Jul 2014 11:58:49 +0000

Fadercore Standard 220mm wide modules VLR-8x16LEDmeter A solution to add 8 Meters with 16 LEDs for each Meter. It contains 2 different Types of PCBs one is the LEDmatrix and the other a slim PCB to mount 16LEDs called meterboard. Eagle Files: BOM

fadercore_-_vlr-motorfader

anonymous@undisclosed.example.com (Anonymous) — Mon, 10 Nov 2014 20:22:20 +0000

**This page is under construction** Fadercore Standard 220mm wide modules VLR-Motorfader A solution to add up to 32 Motorfaders to your Midibox Project. It contains 2 different Types of PCBs one is the VLR-MF_NG and the other a slim PCB to mount to your Fader so its detachable for service.

goblinz

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Sep 2008 11:11:36 +0000

Goblinz Wiki About Me I live in Yorkshire in the UK and work as an applications administrator. I spend most of my life working, at festivals or at raves. I discovered MIDIbox through Wilba's MB-6582 which was posted on Hackaday and was thoroughly impressed by it and also the community that exists on MIDIbox. I'm planning on building a few more boxes after I finish my

how_to_organize_a_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Jun 2016 13:02:20 +0000

Guide to Organizing a Bulk Order Organizing a Bulk Order for the forum can be a much more involved task than expected. This guide is to help you make all the steps required for a successful Bulk Order. 1: Sourcing and Pricing * Post a thread in the Bulk Order Forum to arouse interest, and so people can scavenge the net for suppliers.

ilmenator

anonymous@undisclosed.example.com (Anonymous) — Sun, 01 Mar 2015 14:14:17 +0000

Welcome to ilmenator's WIKI page. I'm a regular contributor to the MIDIbox forum, and in the last few years have worked on a number of projects involving MIDIbox modules. Some of them are worth documenting. You'll find them here. PCBs I have created a

installing_gputils_and_sdcc_on_osx

anonymous@undisclosed.example.com (Anonymous) — Sun, 26 Nov 2023 20:16:22 +0000

GPUTILS & SDCC on Mac OS X While you probably need a PC to burn the MBHP-Loader into the PIC, you can stick to your beloved Macintosh while coding your C-Applications! And more than that: you are able to use Apple's powerful Xcode as IDE and don't leave that except for sending the .syx file! You can even

logic_audio

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Logic Control Emulation The best solution for Logic users is the use of Logic Control - the emulation is called MIDIboxLC Environment tinkering You can also route MIDI events which are sent by any MIDIbox controller like MIDIbox64/MIDIbox64E/MIDIO128 directly to any object (MIDI/Audio) by using Fader events.

lorcan

anonymous@undisclosed.example.com (Anonymous) — Tue, 21 Apr 2009 10:29:51 +0000

Lorcan - diy projects Controllers eDrum eDrum DIY Completed MidiBox+ Half-finished (an oldie !) MidiBox LC Planning * 8 motorized faders * additional monitor/phones controls (analog path) * Cubase-specific layout ---- FINISHED PCB Design * Channel buttons (4 chan./pcb): select/mute/solo/rec. rdy + leds (x2)

mb-808

anonymous@undisclosed.example.com (Anonymous) — Fri, 04 Nov 2011 02:19:47 +0000

MB-808 - Roland TR-808 clone with MIDIbox sequencer The main web page for the project is Unfortunately, we've had some trouble with the hosting provider not properly taking payments, so I've made a complete backup of the web site and I'm uploading it to

mb-9090

anonymous@undisclosed.example.com (Anonymous) — Fri, 04 Nov 2011 02:26:09 +0000

MB-9090 - Roland TR-909 clone with MIDIbox sequencer The main web page for the project is For more info, please contact doug at midibox addict dot com. Thanks!

mb-scope

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:12:16 +0000

MB-Scope Introduction The MB-Scope aims to be a dual 3-inputs synced digital scope for Audio / Modular Control Voltages * Forum Thread FrontPanel On Vertical Re-design first version: Parts TFT * 320x240px 2,8" TFT Display * [ILI9341 Datasheet] Analog>Digital Converter * [MCP3428 4 inputs ADC Mouser Datasheet] Community users working on it

mb_mixer_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 May 2009 23:08:37 +0000

MB Mixer - pcbs bulk order Time Frame This bulk order has no time frame yet. Payment One word, ........ , Paypal, ... i can offer bank transfer for countries without pp, too, but more infos when the time has come. PCB Costs At first I have to collect interests. After that I can request the prices. I suppose a cost of 2-3 Euro per pcb if we order a total amount of 150-200 pieces. Under that we should calc with 3-4 Euro for now.

mb_sync24

anonymous@undisclosed.example.com (Anonymous) — Fri, 09 Sep 2011 02:54:41 +0000

MB Sync24 converter Sync24 is (was) used by Roland, to syncronise machines before the midi became popular. Basicaly, it's just a “pulse clock sync” at 24ppqn (24 pules per quarter note) This converter help to sync your Roland Tb-303 Tr-606 Tr-808 to sync with midi, or to sync your apeggio (sh-101 / juno60 etc..)

mc_protocol_mappings

anonymous@undisclosed.example.com (Anonymous) — Wed, 10 Oct 2012 05:45:44 +0000

Mackie Control Protocol Software Mappings OK, so as we know, the Mackie Protocol (as opposed to Logic control) is now supported by a whole slew of audio applications (to varying extent). The way in which each button works with each software package is similar in some cases, but generally quite different. (example: the Logic

midibox

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Dec 2011 14:08:13 +0000

!!!The MIDIbox Hardware Platform (MBHP) The MIDIbox Hardware Platform is the continuation of the work of Thorsten Klose on MIDI controllers in the past several years. It brings every MIDI controller design down to one standardised environment with reusable and exchangeable modules. Modular construction is nothing new in electronic devices.

midiboxgroove

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 Apr 2007 20:22:24 +0000

MIDIBox Groove Sequencer This page is for discussion of a simple sequencer for live use that records and loops four bars of MIDI events, in sync with an external MIDI clock source. For now: See This Forum Topic

midiboxkb_-_using_a_c64_keyboard_as_input

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:31:26 +0000

MidiBoxKB Since Thorsten released a 8*8 scan matrix driver, it's easily possible to use a C64 Keyboard with MIOS. The C example can be downloaded here : * * First, i did this pcb (on a breadboard) : The program Use that sample program to test your keyboard connection :

midiboxmixer

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:27:36 +0000

MBMixer Version 2 note: This page is an edit in progress. At this time the change to version 2 is near complete, but I may have missed a few details. Copyright (C) 2007,2008 Lyle Hazelwood (lylehaze@gmail.com) Licensed for personal non-commercial use only. All other rights reserved.

midibox_8x8_standalone_matrix

anonymous@undisclosed.example.com (Anonymous) — Sat, 04 Aug 2007 04:17:29 +0000

A very simple but very convenient device for midiboxers who use Ableton live : the squared keyboard. Some extra features planned like Midi Channel selection or switch between CC or Note for the behaviour of the buttons. What does it look like ?

midibox_ay_keyboard

anonymous@undisclosed.example.com (Anonymous) — Mon, 29 Mar 2010 13:07:08 +0000

MIDIBox AY 3 8912 - C64 Keyboard The MIDIBox AY has no Encoders or Buttons - but a C64 Keyboard. The Commodore 64 Keyboard => Interconnection (C64 Keyboard - MBHP DIN/DOUT) The C64 Keyboard must be connected to the MBHP DOUT (DOUT1: J3(Pin D0 to D7)) Board and

midibox_master_keys

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 Apr 2007 13:23:20 +0000

MIDIbox Master Keys The idea originally came from this thread, to enable a broken master keyboard that only sends on channel one, to have keyboard splits and send on other channels... Typical of me, I had to make my design for my “ultimate” master keyboard, and it's a modular kind of setup.

midibox_sid_v1_manual

anonymous@undisclosed.example.com (Anonymous) — Fri, 28 Sep 2007 06:37:58 +0000

MIDIbox SID V1.7303b User Manual OSC (oscillator submenu) OSC selects the oscillator(s). The parameters right to this item are displayed accordingly. If more than one oscillator is selected, only the values of the first will be displayed, but the values of all selected will be changed.

midibox_traktor

anonymous@undisclosed.example.com (Anonymous) — Sat, 14 Apr 2012 13:41:21 +0000

This page contains list of MB projects that are made specifically for use with NI Traktor DJ Studio 2 & 3 and Traktor Pro: * The Thing by Mpro-ject * Traktorizer by MTE * SELEKTOR by Wild_Weasel * Link to his Build Log - English - * SELEKTOR II by Wild_Weasel * Link to his Build Log - English - * From C128D to TDS Controller by ToS

mios_pic18f4620

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:09:40 +0000

PIC18F4620 one of the Future Microcontrollers for memory intensive Applications A special variant of MIOS is available for the PIC18F4620. The usage of this processor is (currently) only required for the next major step of MIDIbox SEQ (V3), most other projects are running fine on a PIC18F452

misc_modules

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

* Misc: * MIDIbox Extensions uCApps

msq-cc-bcr

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Feb 2018 02:52:14 +0000

MSQ-CC-BCR MotionSeQuencer for ControlChanges for BCR2000 by wireing it to MBHP Synth-Patch-Editor & Motion-Sequencer 4 ControlChange (= CC-Automation) Introduction Controls and automate my Nord Drum2 NORD DRUM 2 Realized by connect a BlackBox between Sequencer & Synthesizer

msq-cc-lre

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Feb 2022 21:27:36 +0000

MSQ-CC-LRE MotionSeQuencer for ControlChanges for 2xLRE8x2 Boards Synth-Patch-Editor & Motion-Sequencer 4 ControlChange (= CC-Automation) Introduction Controls and automate a Nord Drum2 (Drum-Synth )NORD DRUM 2 It acts as: - Midi Merger NTE,CLK,PC merge with CC

nebula_bulk_orders_rean

anonymous@undisclosed.example.com (Anonymous) — Wed, 22 Oct 2008 06:56:42 +0000

Re'an knobs. This bulk order is complete. No further orders accepted. If for some reason you did not receive your knobs please send PM to nebula on the MIDIbox forum. QUANTITY IS FINALIZED - PLEASE DO NOT EDIT THIS PAGE SEND A PM TO NEBULA IF YOU WANT KNOBS OR IF YOU WANT TO CHANGE YOUR QUANTITY

opl3_module_modified

anonymous@undisclosed.example.com (Anonymous) — Tue, 28 Jan 2014 11:40:13 +0000

MBHP_OPL3 module modifications, the 5V option The MBHP_OPL3 module originally has three TL074 op-amps, and a circuit that needs +/-12V bipolar power supply. In Wilba and nILS sammichFM, they use two OPA4348 rail-to-rail op-amps, that can be powered by 5V. Sauraen suggested another 5V rail-to rail op-amp, the MCP6004, which is pin compatible with the TL074, and a way to modify the OPL3 module to use these.

pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

A component made up of layers of copper and fiberglass; the surface of a PCB features a pattern of copper lines, or “traces,” that provide electrical connections for chips and other components that mount on the surface of the PCB. A term used in the electronics industry to denote a RAW (non-populated) Printed Circuit Board.

pic_burner

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Nov 2006 14:27:59 +0000

PIC Burner uCApps Here are a couple of photos of a finished pic burner V2 board for reference. Image 1 Image 2 The new version of the board V2 shown in the images is from Mikes Shop and does not require an adapter for the smaller pic chips as there is a socket for it built in.

power_supply

anonymous@undisclosed.example.com (Anonymous) — Sun, 10 Feb 2008 10:28:23 +0000

power supply 1. The component that supplies power to a computer or other electrical device. Most personal computers can be plugged into standard electrical outlets. The power supply then pulls the required amount of electricity and converts the AC current to DC current. It also regulates the voltage to eliminate voltage or current spikes and surges common in most electrical systems. Not all power supplies, however, do an adequate voltage-regulation job, so a computer is always susceptible to la…

pt10_bulk_americas

anonymous@undisclosed.example.com (Anonymous) — Sun, 14 Dec 2008 18:43:40 +0000

MB-6582 PT-10 Case / Milling Bulk Order Note: This Bulk Order has been extended ! The enclosure used in Wilba's MB-6582 prototype: Is now set for a bulk order for North and Central America. The enclosure is available in Black and Bone, but this bulk order will only deal with the Black enclosure. In addition, those that take part in the bulk order will have the option to have the panels milled and silk screened. All panels sent to Doug will be Black anodized and he is offering a single c…

qbas

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Oct 2007 13:27:00 +0000

Usually I use a shitty sharing pages: sm32x32 But stryd one always says that's a bad idea because that is how things get lost. So you should always put all your code and documentation on the midibox.org domain!! Fortunately, because stryd_one knew this would happen, he took a copy of the file. Here it is:

seq_c64_keyboard_mod

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:40:35 +0000

MIDIbox SEQ v3 inside a C64 case, using its keyboard It's possible to save some time and money building the SEQ into a Commodore 64 case and re-purposing the keyboard, so that each key corresponds to each of the buttons expected in the original project.

seq_v4l_mk._ii

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Feb 2017 20:49:45 +0000

SEQ v4L mk II An updated SEQ V4L that only needs one ribbon connector to an LPC-17 or STM32F4 Core. Image credit: TK. Schematic Matrix wiring Wiring follows the same form as the original SEQ v4L. Each element is shown separately (please ignore the part designators):

soldering

anonymous@undisclosed.example.com (Anonymous) — Tue, 07 Jun 2016 21:27:22 +0000

Soldering FIXME Update this page with more pictures at least Soldering well A quote from Ask Dr. Solder sums things up quite well: Q: How long should it take to make a “good” solder joint on a common solder pad? A: Tricky question! The time spent on the pad is called

soundcards_with_ymf262_and_or_yac512_chips

anonymous@undisclosed.example.com (Anonymous) — Mon, 26 Nov 2012 23:57:22 +0000

Chip Reference Table This page is a listing of PC soundcards which contain or do not contain the two chips (YMF262 & YAC512) necessary to stuff a MBHP OPL3 Module in order to build a MIDIBox FM Synthesiser Please add chip name to the first two columns to indicate the presence of that chip. Please try to keep entries in alphabetical order for clarity

speakjet

anonymous@undisclosed.example.com (Anonymous) — Tue, 13 Feb 2007 12:30:09 +0000

The Speakjet is a speech chip from Magnevation. See Midibox Speakjet for a Midibox based SpeekSynth Project.

stribe

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Sep 2016 13:59:48 +0000

Stribe Introduction Official Website : Stribe Website The Stribe is an 8-channel touch-controller for music or video software. 8 sensitive membrane touch-strips flanked by 16 . 64-LED meters provide 8 simultaneous variable inputs and 16 columns of illuminated feedback. Everything is computer-controlled via USB.The Stribe is designed to work with popular music-composing software such as MAx/MSP and Ableton Live.

sync_4_newbies

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:06:11 +0000

Adding Sync to your MB Sequencer I (dcer10) am new to electronics myself and I found it difficult to get sync working on my sequencer, so to avoid anyone else having this problem again here is the correct way to add sync to the sequencer. I must also state that I came across this information with the help of seppoman, stryd_one, TK, and Bill. I can not claim ownership of the solution!

temp_template_test

anonymous@undisclosed.example.com (Anonymous) — Fri, 17 Oct 2008 01:11:42 +0000

MIBIbox 64 Intro -All about it, what it does and blah Features * up to 64 Pots or Faders, dynamic priorities: latency < 1 ms! :-) * up to 64 Push-Buttons * up to 64 LEDs * one internal bank * +16 external banks with every BankStick

triggermatrix4

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Oct 2021 13:39:33 +0000

TriggerMatrix V4 REAL: CAD-Design: Left: Serial Nr1 << >> Right: Prototype CODE, FIRMWARE Install MIOS Studio, connect TM4 via USB, and Start the STUDIO 1. Upload MIOS BOOTLOADER 2. (only needet for Virgin Machines) type following commands into the MIOS-TERMINAL:

triggermatrix5

anonymous@undisclosed.example.com (Anonymous) — Thu, 06 Feb 2025 15:05:03 +0000

TriggerMatrix V5 first renders off Triggermatrix V5 TM-V5 uses custom PCBs 17 Screens now driven by the Display driver PCB So the Matrix-Cells get names now in X and Y view Trigger-Output on 5V Level (before it was all midi only) Trigger-Input on 3V, 5V or Mic-Preamp-Level

ultra

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:45:58 +0000

current projects: midibox seq midibox lc/64 for controlling ableton live planned projects: magic midi delay some knob box with at least two lcds showing parameter names completed projects: working on that! pcbs designed for the community: ultracore - a single pcb that includes a core module, 4 IIC modules, and 8 banksticks on a small (160 x 80 mm) board.

ultracore

anonymous@undisclosed.example.com (Anonymous) — Tue, 03 Jun 2008 03:31:24 +0000

ultracore 1 core module, 4 IIC modules, and 8 banksticks on a single pcb designed for midibox seq, router, or any other application you can think of. features core module with two lcd headers and pinout that matches most standard displays. 4 iic modules.

universal_control_editor_documentation_english

anonymous@undisclosed.example.com (Anonymous) — Sun, 31 Dec 2006 06:13:01 +0000

Universal Control Java Editor documentation Framework for adding content from here, which will need to be imported page by page, then tidied up from the automated German-English translation. For consistency please use the Template and Section Template ---------- Next: Introduction Up: Previous: Contents Contents Introduction

usb_gm5_module

anonymous@undisclosed.example.com (Anonymous) — Fri, 27 Mar 2009 13:36:02 +0000

MBHP GM5 Module Overview The GM5 is a bus-powered USB MIDI interface IC from Ploytec. It provides up to 5 independent MIDI inputs and 5 independent MIDI outputs. It is only available as a surface mount IC, and only in large (250+) quantities. TK organizes regular bulk orders for this IC.

waldorf_knobs_bulk_order_2015_2016

anonymous@undisclosed.example.com (Anonymous) — Sat, 31 Oct 2015 13:35:53 +0000

kristal='s closed bulk page for the ALBS/Waldorf knobs 2015/2016 This is the 2015/2016 bulk order for the ALBS/Waldorf knobs used by the MB6582 and the SEQ4. * Forum thread for this bulk order: You can choose from ---------- * Drehknopf DK11-170 A.6/4,5 vertieft (recessed, black), see

wilba_mb_6582_control_surface_parts_list

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Dec 2010 03:22:47 +0000

The control surface PCBs are designed to work with the following parts: * PacTec PT-10 enclosure * 1.5mm anodized aluminium panels, the same dimensions as the PT-10 aluminium panels, but without mounting holes in the corners. The panel is mounted to the case using screws glued to the panel underside. The PCB is mounted to the panels using threaded spacers glued to the panel underside.

wilba_mb_6582_orders

anonymous@undisclosed.example.com (Anonymous) — Fri, 06 Jul 2007 02:42:39 +0000

This page used to have a list of people and their orders, but I can't be bothered updating it. PEOPLE INTERESTED IN OBTAINING THE PCBS CAN LOOK AT THE MIDIBOX FORUM TOPIC HERE.

wilba_mb_6582_parts_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Feb 2012 11:22:42 +0000

MB-6582 Parts Bulk Order THIS BULK ORDER IS CLOSED This is a bulk order for MB-6582 control surface parts, available for Australians Only (If you live in Europe or the U.S., you have access to many good online stores which can sell these parts. I am running this bulk order for the guys in Australia who don't want to pay the excessive postage costs to Australia just for a handful of parts. If you also live in some distant corner of the world, please PM me and I might allow you to join this b…

wilba_mb_6582_parts_list

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Oct 2018 17:12:40 +0000

MB-6582 Parts List Please read the entire construction guide before buying parts or starting to solder anything. It is important that you understand what options you have for the PSU and sockets before buying parts. Therefore, you should read the MB-6582 Base PCB Construction Guide and decide on the PSU option and sockets you plan to use.

ymf262

anonymous@undisclosed.example.com (Anonymous) — Thu, 19 Mar 2009 01:02:27 +0000

Yamaha YMF 262 The Yamaha YMF262, also known as the OPL3 (OPL is an acronym for FM Operator Type-L), is an FM synthesis sound chip. One is necessary for the MBHP OPL3 Module used for a MIDIBox FM Synthesiser. There is a list of soundcards with YMF262 and/or YAC512_chips. YMF262 on wikipedia.

bankstick

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 18:15:37 +0000

The Bankstick is a non-volatile memory module for storing your presets/banks/patches on the MIDIbox. Info can be found here: For Developers: In this forum post, TK explains how to program bankstick read/write access to custom applications:

software

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:44:33 +0000

Software PC This section covers details of the software you'll need on your linux, mac os/x, or windows PC, as well as software which is cross-platform. linux osx windows xplatform MBHP This section covers details of software which you will upload to your MIDIbox mios

mb-mtrx_bulk

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2011 17:44:58 +0000

MB-MTRX Bulk Order Overview MB-MTRX is a printed board for the 8×8 modulation matrix commonly used with the MB-SID projects. The main board itself is just the LEDs and buttons connected to SIL headers, which can connect to DIN/DOUT modules or daughterboards. The daughterboards are for converting the board to the

mbuntu

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 11:06:01 +0000

mbuntu Status Update 15/01: Thanks to a kind donation from stryd's neighbour, we now have a box dedicated to mbuntu development. Now working out the finer points of the interaction between apps and also some config tricks. mbuntu's beginnings are stryd_one's full-time operating system on three machines, so it could be said that it's coming along OK, or you wouldn't be reading this ;)

software

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 16:55:26 +0000

midibox_seqv3

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:06:00 +0000

MIDIbox Sequencer v3 Intro One of the most powerful hardware MIDI step sequencers around. Features List 'em Skills / Equipment Required Tools Soldering Hardware What modules do I need? Adjust List as required: Core Module LCD Module Bankstick Module LTC Module DIN Module DOUT Module AIN Module AOUT Module AOUT_NG Module AOUT_LC Module IIC Midi Module Parts List List of pots, buttons, faders and blah - suggestions on good parts and where to buy them + how to hook…

midibox_sid_v1_manual

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:41:55 +0000

midi_mapper

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jul 2011 14:53:45 +0000

MIDI Mapper Intro This page describes the MIDI-Channel-Mapper device, which can route input channels of a single hardware input to output channels of a single hardware output in any way you want. The device's user interface is designed to allow switching the routing of some channels while performing, leaving other routings untouched.

constructing_enclosures

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:09:49 +0000

MIDIBox 64 : Building a case From the original by Tor Arne Case basics Now the front panel is done. What we need now is a case for all the electronics that are not mounted to the panel. This is for example the PCB and the MIDI plug sockets. Of course the case have to match the panel in some way. Again consider how you're going to use your box. If you'll be playing live with it I should probably be in metal to compensate for rough use. If not, wood or plastic is great. If your panel is 19

references

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:23:28 +0000

References Some of the info on this wiki is a summary of info from other sources. If you'd like to know more, these links my be of interest. Please add any info you think may be useful! Learning Book Reviews Various PIC and C programming books Forum Highlights <- check this out!

linux

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 05:12:51 +0000

Linux Software Software Development Hardware Development KiCAD Layout Editor Eagle Layout Editor Eagle 3D POV-Ray InkScape Vector Graphics Editor MIDIBox Control Sun Java RE Misc Distro mbuntu A software repository/distro for MIDIbox and other DIY electronics Wiki OpenOffice Converters to dokuwiki format are available for OOo

blm16x16_build_guide

anonymous@undisclosed.example.com (Anonymous) — Fri, 24 Nov 2017 19:52:01 +0000

IN PROGRESS MIDIbox BLM 16x16+X PCB and case build guide Introduction In 2010, MIDIboxer TK. made huge waves with his BLM (button LED matrix) 16×16+X. Never before had we seen such a mangle of duo LEDs, verowire and shift registers. The monome had been known for several years prior, as had smaller matrices for the SEQ, but the

midiprocessing

anonymous@undisclosed.example.com (Anonymous) — Mon, 15 Sep 2014 19:48:51 +0000

MIDIdocs The V4L as a MIDI Processor Forum Discussion Thread - for comments, corrections, or questions about this article The V4L can also be used to process incoming midi signals. All incoming MIDI can be forced-to-scale, and effects (like delays and LFOs) can be applied to selected channels. Since firmware version 85, with a configuration change, the processed notes can go out on the same channel they came in on.

din

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:45:27 +0000

About A DIN module is used to connect buttons and encoders to the Midibox. The Name comes from “Digital Input” and means that the module can detect two states: ON or OFF. It then sends this information to be processed by the mbhp core module.It comes with multiple serial registers 74HC165; every register provides 8 digital inputs, which are sampled with the latch enable signal LD and shifted out with the clock signal CLK. The advantage of using such shift registers is, that they can be cascaded…

mbhp_suppliers

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:33:42 +0000

Premade PCBs & Kits SmashTV SmashTV's MIDIbox Store: located in USA (ships worldwide) - PCBs, Kits, preburned PIC18F452, Encoders, Potentiometers, LEDs, and other MIDIbox parts. Mikes Elektronikseite www.mikes-elektronikseite.de: located in Germany (ships worldwide too) - PCBs, Kits, preburned PIC18F452, Parts

18f4620

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Dec 2008 10:33:29 +0000

PIC18F4620 A special variant of MIOS is available for the PIC18F4620. The usage of this processor is (currently) only required for the next major step of MIDIbox SEQ (V3), most other projects are running fine on a PIC18F452 (MIDIbox SID V2 will run on a

v1_manual

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:55:05 +0000

midibox_seq_v3

anonymous@undisclosed.example.com (Anonymous) — Sun, 12 Jan 2014 09:17:17 +0000

MIDIbox SEQ 3 * Overview uCApps

mbuntu

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Jan 2009 16:11:00 +0000

8x8_scan_matrix_extended_a.k.a_voirinov

anonymous@undisclosed.example.com (Anonymous) — Sun, 01 Jun 2014 08:16:36 +0000

Voirinov is a keyboard capable of playing Notes, control changes, and program changes. look at it : :-)

16th_fixed_polysequencer

anonymous@undisclosed.example.com (Anonymous) — Wed, 20 Dec 2017 04:47:51 +0000

16th fixed PolySequencer beta in action - youtube Specs ? 4 Midi-Channels: 1 2 3 4 --2 Tracks a Channel --8 Notes-Chord a Track --each track has a dedicated and changeable loop-length from 16 to 512 Steps (example for 4-4) --each Track can played single and booth tracks can be played simultan/in-dual

acsim_console_h

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:45:08 +0000

This page is part of the mios_c_simulator_-_debugger ACSim_console.h ACSim_console.c ACSim_mios.h ACSim_mios.c ACSim_toolbox.h ACSim_toolbox.c ACMidiDefines.h This code is for viewing only and may not be up to date. You can download the files in a zip file . If you make any updates, please send them to stryd_one and he will update the zip for you. /* * ACSim_console.h * v 0.0.7 * * 2006 April 06 Created by Michael Markert, http://www.audiocommander.de * mios simulator …

acsim_mios_c

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:46:59 +0000

This page is part of the mios_c_simulator_-_debugger ACSim_console.h ACSim_console.c ACSim_mios.h ACSim_mios.c ACSim_toolbox.h ACSim_toolbox.c ACMidiDefines.h This code is for viewing only and may not be up to date. You can download the files in a zip file . If you make any updates, please send them to stryd_one and he will update the zip for you. /* * ACSim_mios.c * v 0.0.7 * * 2006 April 06 Created by Michael Markert, http://www.audiocommander.de * mios simulator sou…

acsim_toolbox_c

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:48:30 +0000

This page is part of the mios_c_simulator_-_debugger ACSim_console.h ACSim_console.c ACSim_mios.h ACSim_mios.c ACSim_toolbox.h ACSim_toolbox.c ACMidiDefines.h This code is for viewing only and may not be up to date. You can download the files in a zip file . If you make any updates, please send them to stryd_one and he will update the zip for you. /* * ACSim_toolbox.c * v 0.0.5 * * 2006 April 17 Created by Michael Markert, audiocommander.de * Copyright 2006 Michael Mar…

acsim_toolbox_h

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:49:20 +0000

This page is part of the mios_c_simulator_-_debugger ACSim_console.h ACSim_console.c ACSim_mios.h ACSim_mios.c ACSim_toolbox.h ACSim_toolbox.c ACMidiDefines.h This code is for viewing only and may not be up to date. You can download the files in a zip file . If you make any updates, please send them to stryd_one and he will update the zip for you. /* * ACSim_toolbox.h * v 0.0.5 * * 2006 April 17 Created by Michael Markert, audiocommander.de * Copyright 2006 Michael Mar…

antixfm

anonymous@undisclosed.example.com (Anonymous) — Thu, 14 Jul 2016 17:48:27 +0000

Antix Midibox FM Build Introduction I used MDF wood for the bottom and for the sides I used plywood with Zebrano veneer. The front and the rear panels are aluminium and a friend of mine made lasercutting in his workshop ( I designed it with Front Panel designer )then silkscreen ( an other friends in another workshop ) and at the end a layer of transparent acrylic.

aout_module

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Aug 2016 00:43:12 +0000

AOUT Module Introduction AOUT modules generate Analog (Control) Voltages (and gate signals) *. It provides 8 control voltage (CV) outputs with 12 bit resolution and 2 gate outputs. It is used by various MIDIbox projects to control analog synthesizers and/or FX gear.

apparat_20_construction_blog

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:15:24 +0000

"Apparat 20" construction blog (“Apparat” is an old-fashioned german word for a telephone or also for the extension number of a phone.) As I just started with my next MidiBox project, I thought this time I´ll have to contribute a build blog. So here we go:

bankstick

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:28:56 +0000

The BankStick is a Plug & Play storage device used to store presets or configurations on the MIDIbox. * BankStick µCApps

best_diy-looking_midibox

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:36:18 +0000

Best DIY-looking MIDIbox price : 1 CORE KIT rules: DO IT YOURSELF!!! The most beautifull box done entirely “at home”. Means: - a front-panel that you drill yourself, self-made PCBs, Case you build from A to Z. The electronics as well as the final outside design will be take into account

best_midification

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:38:08 +0000

Best MIDIfication for the fun, no prized rules: All is in the tittle! For those who have MIDIfied Organs, analog synth/filters, coffee machine or sofa’s... Of course the MIDIfication must be done with Ucapps MIDIbox gear.

best_pro-looking_midibox

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:37:35 +0000

Best pro-looking MIDIbox for the fun, no prized rules: Your box look like a ‘pro’ one? Here is the right place for you. It’s about the outside as well as the inside and the docs (or “datasheets” ;-) ) you will produce with it. All the state of the dev have to shown, please publish all the related document (autocad design, schematic,

blm16x16v2

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Feb 2023 15:47:48 +0000

BLM16x16+X V2 - Board for TriggerMatrix4 i used Latigid ONs PCB: blm16x16_build_guide, but i had only 2 PCBs, one for me, and one finally got Maxim Anokhin (Limewax), in order to get more Triggermatrices into the world I made my own Version for the upcoming triggermatrix5 Shematic Building and BOM

button_overlay

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Mar 2007 22:58:38 +0000

Following code snippets should give you an inspiration, how an existing assembly based applications like MIDIbox64 or MIDIbox64E can be easily enhanced by additional button functions, which send statically assigned MIDI events. The idea is to overlay the USER_DIN_NotifyToggle hook. This hook is called by MIOS when a digital input has changed its state (0V

change_id

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

The purpose of the “change_id” application, which can be found at the MIOS Download page, is to change the MIOS Device ID, and other settings like to-COM flag, LCD mode and IIC MIDI addresses. Normaly, the ID field can be specified when you are burning the bootloader into the PIC (see bootloader page). For people who don't own a PIC burner and forgot to specify it when buying a preburned PIC at SmashTV or Mikes shop, change_id can be used as alternative solution - this application reprogramms t…

chinmuzik

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Jul 2016 00:50:39 +0000

ChinMuzik MIDI Hardware geek from Winston Salem, North Carolina , USA , born in 19XX?. Project list Currently workin on: @11-07-2016 * MB Modulbox-NG * MB-EuroSID Contact chin.muzik.nj(at)gmail.com * Forum profile

coilwinder

anonymous@undisclosed.example.com (Anonymous) — Mon, 03 Apr 2023 23:40:48 +0000

Coil Winder A Tesla Coil winding machine, controlled by Mios: Watch German Video about using it, and TimeLapse build Watch English Video... CODE, FIRMWARE Install MIOS Studio, connect a Core-Stm32F4 via USB, and Start the STUDIO 1. Upload MIOS BOOTLOADER

compact_5_12_-12_psu

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Apr 2015 21:51:39 +0000

Altitude's Compact +5/+12/-12 PSU This is a small, 600 mA max power supply for use with projects requiring +5/+12/-12 rails (Aout, FM, etc). The PSU is designed to be powered by mains (either 220V or 115V), mains are dangerous and it is assumed that you know how to work with them safely.

compiled_c_code_size

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Nov 2006 13:15:15 +0000

From jackchaos via Code Optimization From I've been watching my code block size increase steadily as I work on my project and I'm now aware first hand of how assembler can be much more efficient that what a compiler can do. I wanted to share a method I use to determine if my C optimizations are reducing the code size.

core4disc

anonymous@undisclosed.example.com (Anonymous) — Sun, 12 Feb 2023 13:42:48 +0000

Core 4 Discoveryboard STM32F407VGT6 this is one essential part for my triggermatrix5 i need a core pcb which is aviable in Europe, and uses the stm32F407VGT6 chip, which has 1MB ram... Shematic i think there is a error - PB2 is not connected to the CORE MODULE

core4discmidiex

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:13:42 +0000

Core4Disc Midi-Expansion this is one essential part for my triggermatrix5 Shematic Building and BOM Handsolder, easy project... BOM qty reference value footprint mouser 1 Midi1 Pin-Head-2×4 PinHead-Shrd-2×4-THT 649-75869-232LF 4 Midi-IN1-2, Midi-OUT1-2

crystalsforboxes

anonymous@undisclosed.example.com (Anonymous) — Tue, 23 Oct 2007 07:44:04 +0000

The following is a list of MidiBox Projects, and the crystals required to operate them. Module Frequency of CrystalNumber of PinsType of deviceCore10MHz2 pinsCrystalSID ModuleFrom CoreN/APWM pinOPL3 Module14.318 MHz4 pinsOscillatorIIc SpeakJet

daw-ableton

anonymous@undisclosed.example.com (Anonymous) — Fri, 20 Jan 2023 00:41:02 +0000

DAW-Ableton this is a DAW controller for Ableton Live in combination with some M4L plugins, you can can controll Macro-Racks, see Track and Macronames and so on later more...\ PCBs * DAW-BTN 3+3 LED Buttons, a PCB tu build a DAW-Controller *

daw-btn

anonymous@undisclosed.example.com (Anonymous) — Sat, 11 Feb 2023 22:52:02 +0000

DAW-BTN - Board It is one part to build a DAW-controller, it can be used multiple times it needs external din and dout modules (doutx4,dinx4 for example) Here are the gerberfiles for production - i made it withJLCPCB They are not testet at the moment, i am waiting for the PCBs

daw-encoder-display

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Mar 2023 04:15:33 +0000

DAW-Encoder-Display - Board I made this PCBs to use it with Latigid-Ons display_driver It is one part to build a DAW-controller, it can be used multiple times Here are the gerberfiles for production - i made it withJLCPCB testet - working fine! Shematic

db9

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

A designation for a particular type of connector. DB-9M Function Abbreviation Pin #1 Data Carrier Detect CD Pin #2 Receive Data RD or RX or RXD Pin #3 Transmitted Data TD or TX or TXD Pin #4 Data Terminal Ready DTR Pin #5 Signal Ground GND Pin #6 Data Set Ready DSR

db25

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

A designation for a particular type of connector. DB-25M Function Abbreviation Pin #1 Chassis/Frame Ground GND Pin #2 Transmitted Data TD Pin #3 Receive Data RD Pin #4 Request To Send RTS Pin #5 Clear To Send CTS Pin #6 Data Set Ready DSR Pin #7 Signal Ground GND

din_dout_pintable

anonymous@undisclosed.example.com (Anonymous) — Mon, 24 Nov 2008 05:42:33 +0000

MIOS DIN/DOUT Pin Numbers Sometimes the pin numbers of special DINs or DOUTs can be specified in the main.asm or setup_*.asm file of a MIOS application. Examples: #define DEFAULT_MIDI_RX_LED 0x40 ; DOUT SR#9, pin D0 #define DEFAULT_MIDI_TX_LED 0x41 ; DOUT SR#9, pin D1

dipboardf4

anonymous@undisclosed.example.com (Anonymous) — Sat, 03 Nov 2018 02:36:39 +0000

dipBoardF4 MIDIbox Hardware Platform extension for dipCoreF4. Features * Very small size 65x46mm(less than your credit card). * Very low profile. * Your application board can be stacked on bottom with 'Micro-match' connectors. * The dipCoreF4 can be installed on the two side.

dip_switch

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

A series of tiny switches built into circuit boards. The housing for the switches, which has the same shape as a chip, is the DIP. An acronym for Dual Inline Package, DIP switches enable you to configure a circuit board for a particular type of computer or application. The installation instructions should tell you how to set the switches. DIP switches are always toggle switches, which means they have two possible positions, on or off. (Instead of on and off, you may see the numbers 1 and 0. See …

displaydriver-smd

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:00:13 +0000

Display Driver - Board - for 18 SSD1306 Screens this is one essential part for my triggermatrix5 I need there 17 Displays, and i had good expierence with andys display_driver-board since i didnt want to solder this board by hand again - i created this board. its fully SMD, and made it pick and place ready - so no soldering required!

dougwellington_alps_type_n_motorfader_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Wed, 31 Aug 2011 12:01:12 +0000

Alps RSAON11M9A07 Motorized Fader Group Buy First Batch is Here! This bulk order is for Alps “N” type motor faders. These are the 10k ohm, 100mm long units designed to mount directly to a circuit board. Price is $12 (US Dollars) each plus shipping. I need to order them in multiples of 160 - the first batch has been ordered and is here. As soon as there are enough people on the list, I will order the next batch.

dougwellington_mb6582_powersupply_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Mon, 13 Jul 2009 05:33:06 +0000

Commodore 64 (MB-SID) 110v Power Supply Buy (proposed) The proposal is to buy 100 Recoton C-1004 Power Supplies. These are for use in the Americas (110v) and provide both 5v and 9v via DIN connector. Each supply will cost $7.20 plus shipping. (EDIT: Apparently Priority Mail is $8.95 and that should cover multiple power supplies.)

dougwellington_transformer_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Wed, 14 Jul 2010 14:50:45 +0000

Custom Wound Toroidal Transformer Group Buy (proposed but possibly imminent) The proposal is to buy a fairly large quantity of Toroids with not just 110/220V inputs with dual 15V secondaries, but to add in a third set of secondary windings for 5V. This way, we won't have to chain a 7805 regulator after a 7815 and try to burn off 10V in heat. I intend to buy at least 100 of these for the next batch of

doutx2dinx1

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Jan 2023 01:17:15 +0000

DinX2DoutX1 it gives; 16 Digital Inputs 8 Digital Outputs The Board is fully SMD, and made for pick and place - so no soldering required! Shematic Building and BOM Its build by pick and place robots... so no need to build, or order any component

dout_module

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:24:03 +0000

DOUT Module General Informations A DOUT module is a digital output module, usually used to drive LEDs with a Midibox. * DOUT Module uCApps * DIN & DOUT Pintable Note that hardware pin's will be counted D7 - D0 / O7 - O0 / QH - QA. In contrast, pins for DIN modules will be counted D0 - D7.

dseq32_matrix

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

This page will contain the information about the combined lcd/button matrix forum topicuCApps right now I'm using a modified version of the sm_simple C example this code will be rewritten to make it more coherent modifications to scan matrix example uCApps Hardware DOUT wiring DIN wiring *note: schematics not finished!

eagle_midibox_library

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:27:44 +0000

Eagle MIDIBox Library Encoder * ENC_ALPS_STEC16 * ENC_BOURNS_PEC11 * ENC+SW_BOURNS_PEC11 Display Electronic Assembly * EA_DOG-M * EA_DOGL128-6 * EA_DOGM128-6 * EA_DOGM132-5 * EA_LED55X31 * EA_LED55X46 * EA_LED68X51 * EA_TOUCH128-1

electrolytic

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

A type of capacitor that has a liquid or paste between the plates to increase its capacitance.

electronics_basics

anonymous@undisclosed.example.com (Anonymous) — Mon, 18 Jul 2016 15:36:09 +0000

Electronics Basics . In order to understand better electronics, some basics in electricity are needed. 1 - Basics of Electricity In order to explain electricity, let's imagine a waterfall. A stream going from where there is something to where there is not. Electricity is the same, it's a stream of positive charges going from + to -. (Since the electrons themselves are negatively charged, they move from - to +; but the subtlety of this only matters in semiconductor design.)

encyclopedia_entries

anonymous@undisclosed.example.com (Anonymous) — Tue, 07 Jun 2016 22:20:57 +0000

Encyclopedia FIXME : Fill the things well Move as needed: assembler Assembly CAD EEProm HiFi MIDI Midibox MIDIboxer(s) SysEx PCB A absorption AC active filter ADC Address Bus AGC AI alphanumeric AM AMP amperage ampere amplifier amplitude analog anode ANSI antenna Appletalk array array ASCII assembler assembly language or assembler astable ATA ATAPI attenuation AUI AWG Active Component Aerial AF (Audio Frequency) ammeter AND B backplane bandwid…

euro-aout-ng-connector-board

anonymous@undisclosed.example.com (Anonymous) — Wed, 26 Jan 2022 03:27:45 +0000

EuroRack - AOUT-NG - IO-Port and Frontpanel PCB Size is 100x40mm Hardware Requirements * Soldering Iron - with a Dip that can Handle Thruhole-Parts solder Paste... * The other Parts from the BOM * a Midibox Core32 + Aout-NG

euro-midi-io

anonymous@undisclosed.example.com (Anonymous) — Fri, 11 Feb 2022 15:23:35 +0000

EuroRack - Midi IO - Board PCB Size is 100x40mm FIXME - The Connection from J1 to J2 is wrong - its 1:1 but it has to be crossed. Hardware Requirements * Soldering Iron - with a Dip that can Handle Thruhole-Parts and 1206 SMDs, solder Paste

fader

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:16:01 +0000

Fader Introduction A Fader is, like potentiometer, a variable resistor you change the value by sliding it. It's an analog device. * Some Forum thread On faders * [Bourns PTA Faders @ Mouser] * [Bourns PTL illuminated Faders @ Mouser]

fadercore_-_fadermodule_for_audio_daw

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Oct 2014 16:54:57 +0000

Fadercore Fadercore is a Project to make a replicable and scaleable Fadermodule that can be used for DAW proposals. I started 2010 with that idea because i was Live Engineer of a concert Location. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly my purposes changes. Now its just a fun Projekt to learn how to design an Electronic Product.

fantomxr

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 Jan 2015 12:37:39 +0000

Fantoms PCBs On this page I will list pcb designs I made. Some are tested, some are not. I will add a note to every PCB. Most of them are not that special. But they make the midibox-life easier. LED Ring This is a LED ring which contains 15 LEDs arranged in a ring and the last LED as indication-led for the switch of an encoder. The LEDs are 0805 SMD type.

frontpanel_designer

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 12:13:16 +0000

FrontPanel Designer FrontPanel designer is a proprietary tool Edited By Schaeffer to draw (Aluminium) frontpanels and have them made. Schaeffer is located in Germany. FrontPanel Designer has been used to draw many frontpanels for the midibox project. It handles the *.fpd files.

global_parts_list_table

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Jun 2016 14:48:41 +0000

Full Partlist of Midibox Official Modules To be filled

hex2syx

anonymous@undisclosed.example.com (Anonymous) — Wed, 26 Mar 2008 07:54:47 +0000

Windows * HowTo use hex2syx.pl uCApps *nix Drag & Drop files works on Mac OS X, on Linux you might have to type the paths (complete with TAB): * open the terminal * type cd (Space) and drag the {mios_application}/tools folder into the terminal window, press return

how_to_mix_c_and_asm

anonymous@undisclosed.example.com (Anonymous) — Mon, 29 Sep 2008 12:27:51 +0000

It's actually quite easy! As you can see in the example below, just enclose the ASM part with __asm and __endasm; You might have to declare some additional variables, but the concept is quite straightforward. Do not forget to include the header file of your processor from the SDCC header files, or variables like PRODL will not be defined: e.g. #include

how_to_select_a_pic_id_header

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

The following boot options are controlled by the PIC ID header, which can be changed with IC-Prog before “burning” the firmware: * ID[57..63] : SysEx Device ID (0x00 - 0x7f) choose a unique ID if you want to chain your MIDIboxes * ID[55] : if 0, UART will be initialized with common MIDI baudrate

how_to_use_xcode2_as_ide_on_a_mac

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jul 2011 14:51:21 +0000

How to use Xcode2 as IDE on a Mac While you probably need a PC to burn the MBHP-Loader into the PIC, you can stick to your beloved Macintosh while coding your C-Applications! And more than that: you are able to use Apple's powerful Xcode IDE and don't leave that except for sending the .syx file! You can even debug your MIOS C-Applications with the

installing_gputils_and_sdcc_on_debian_linux

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:45:53 +0000

Installing GPUtils and SDCC on Debian Linux can be simpler or harder than other platforms. Install the binaries (AKA the easy version In it's easiest form depending on what type of PIC you programming, you may only have to issue the following commands.

integrated_circuit

anonymous@undisclosed.example.com (Anonymous) — Wed, 10 Aug 2016 19:19:18 +0000

Integrated Circuit Introduction An Integrated Circuit is a formal name for a component commonly termed chip or IC, that is a small electronic device made out of a semiconductor material. The first integrated circuit was developed in the 1950s by Jack Kilby of Texas Instruments and Robert Noyce of Fairchild Semiconductor, now a part of Schlumberger.

jackchaos

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:51:41 +0000

Introduction Started my first (and so far only) midibox project in the winter of 2006. The prototype was completed 3 months later, but it sat untouched for a very long time. In the summer of 2009, I was determined to finish the Chaos Matrix and began completing its construction.

jdm_with_picpgm

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Jan 2007 00:45:12 +0000

I've tested PICPgm v0.9.9.3 with my JDM programmer and it works. This version has support for burning the “ID Locations”, which is required for the bootloader and MIOS. It also supports PIC18F452, PIC18F4620, PIC16F88 and PIC18F4685. Download

jdm_with_winpic800

anonymous@undisclosed.example.com (Anonymous) — Wed, 02 May 2007 11:27:59 +0000

I tested my good old JDM Burner with Winpic800 because the actual PIC Burner doesnt work with some Computers :( Result : Winpic800 burns the most PICs what needed for the Midibox Projects * PIC 16F877, 16F88, 18F452 & 18F4620 :) not the 18F4685 (with JDM !!!) For 16F877, 18F452 & 18F4620 no changes are needed on the JDM

kartoshka_encoders

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Sep 2008 20:42:03 +0000

Tip from kartodesk on keeping on smooth travel after removing detents from SoundWell encoder Hi all. First, there's extensive info about the encoders on this forum thread to read. The encoders i received were from mc4 batch, identical encoders to those Wilba pictured and organized the sales earlier.

korg_wavedrum_midification

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Feb 2015 17:55:49 +0000

The Korg Wavedrum MIDIfied History of the Wavedrum In 1994 Korg released their first Wavedrum, an electronic percussion instrument. Unlike most other electronic drums this was not just a drum pad used to trigger samples. It was rather a physical modeling synthesizer, where the actual signals from the pickups were used as stimuli for various algorithms generating more or less drum-like sounds. Nevertheless, the

ksir

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Jul 2016 01:11:50 +0000

Ksir MIDI Hardware geek from France, Montélimar , born in 1983. Project list Currently workin on: @04-07-2016 * MB Modulbox-NG Completed * Modulbox * PushBox Blog Ksir DIY Contact k.sir(at)laposte.net * Forum Profile * Soundcloud

latigid_on

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Mar 2018 22:51:38 +0000

latigid on Profile Hi, I'm Andy! Originally from New Zealand and trained as a chemist, I've kept up with electronics since my early teens. I started off with bass and effects, then discovered Moog pedals and synths. More recently I've been exploring modular systems and novel tactile elements. Specifically I'm interested in new types of displays and controllers such as OLEDs, programmable LEDs and touch sensors. Below you can find work-in-progress links to my projects and modules.

led

anonymous@undisclosed.example.com (Anonymous) — Sun, 10 Jul 2016 15:03:37 +0000

LED Introduction LED is an industry acronym for Light Emitting Diode. These are usually small little “bulbs” that glow in different colors when they are “turned on” (most common colors are red, green,yellow, blue or white) RGB LEDs RGB (Red Green Blue) or multicolor LEDs can be serial driven by a core32. Some tests have already been made with

line_driver

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Oct 2018 13:50:18 +0000

LINE DRIVER Boards parts list The line driver modules have been designed to connect SPI devices and serial shift registers (DINs/DOUTs) to a MIDIbox over long distances. * Official uCApps Page * [ Transmitter Schematic] * [ Receiver Schematic] Parts List Description Type Quantity Reichelt Ref

live

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Use MIDIbox64, MIDIbox64E, MIDIO128, MIDIboxLC Configuration: please describe it here: Ableton announced for the end of july the release of Live 5. The big feature is the new implementation of MCU support, this means that Live can communicate with Midibox LC, driving the displays for track identification and sending position updates to the motorfaders. Currently it supports a Mackie Unit+2 extensions, making MBLC an excellent control surface for Live users.

loopa-eurorack-panel

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Feb 2022 21:27:46 +0000

LoopA - Eurorack - Frontpanel with breakout PCB I made this Breakout-PCB and Frontpanel for the midiphy LoopA midiphy LoopA PCB Size is 172x24mm You have to decide if you want Midi Out 3 or the Gate OUT (space thing) The Reset Switch and the SD, Card, are still on the base PCB

lre-oled-bar2

anonymous@undisclosed.example.com (Anonymous) — Tue, 12 Sep 2023 14:24:05 +0000

LRE8x2 096 SSD1306-BAR for Eurorack V2 I made this PCBs to use it with Fairlightii´s mb-lre8x2cs_pcb PCB I didnt panalize it, so you have to do this when ordering the PCB online you will need 4 PCBs per LRE8x2... normally you want to order 8 PCBs (using 2x LRE8x2)

mb-606re

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 20:09:49 +0000

MB-606RE Introduction The MB-606RE is a re-edit of CYM/HH and BD/SD drum parts of the Roland TR-606 to be controlled via MIDI (midibox MB-Modulbox) or CV through analog-Sequencers , in a a Eurorack-designed panel. Well known Circuit Mods from around Web & time are included by default.

mb-fmx2

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:03:24 +0000

MB-FMX2 The MB-FMX2 is a project of a 2xOPL3 synth in 4U height rack Format with a Step C Control surface * OPL3-5V Module * MBFMX2 Forum Thread FrontPanel

mb808

anonymous@undisclosed.example.com (Anonymous) — Tue, 13 Sep 2011 12:34:28 +0000

Summary This page is to describe the operation of the MB808 Sequencer application. It is a work in progress, comments are welcome and usually appreciated :) Forum Thread: This document is split into 3 sections: * Application Summary * Operation Manual

mbhp_genesis_ls

anonymous@undisclosed.example.com (Anonymous) — Tue, 22 Nov 2016 19:22:33 +0000

MBHP_Genesis_LS This is the schematic for the breakaway MBHP_Genesis_LS board included with the MBQG_FP front panel board. This should be sufficient for anyone to build a copy of this circuit on prototype board. Explanation When using the MBHP_Genesis module with a MCU supplied at less than 5V, especially when using several modules in parallel, a buffer circuit will be required between the MCU and the modules. This is a very simple circuit that consists of two 20-pin 74HCT series ICs and two…

mb_ay_3_8912_-_midi_to_hz_chart

anonymous@undisclosed.example.com (Anonymous) — Tue, 23 Jun 2009 13:52:54 +0000

MIDIBox AY 3 8912 MIDI to Hz Chart fT = Tone frequency [Frequency (Hz)] fCLOCK = input clock frequency [2Mhz Crystal = 2.000.000 Hz] TP = Decimal equivalent of the Tone Period bit 0 to 11 (Coarse Tune + Fine Tune) MIDI Note 0: TP = (2.000.000Hz) / (16x(8,1757989156 Hz))

mb_olre16

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Apr 2019 08:50:31 +0000

OLRE16 :!: Under Developpment :!: Introduction The Start point was a search about a good LED-Ring for encoders Forum thread . 2 existing solutions , but that could be improved : * The LED Ring Breakout Board from Sparkfun Big, single blue color and only 16 segments. [ ] * Fairlightii LRE8x2CS..Monochrome, Only 16 segments

menno

anonymous@undisclosed.example.com (Anonymous) — Wed, 18 Feb 2009 20:47:10 +0000

i have a “classic” Midibox+, built in 2002. I didn't use the Box much lately but i will be in the near future. I intend to use it to manipulate the Automation Lines in Blue. Blue is a composition program for Csound. Plans are to make those Automation Lines midify-able. I hope this works out well because there are surely some problems to overcome or to accept. One thing might be the relative poor resolution of midi itself - a resolution of 127. And the Automation Lines in Blue can have a resoluti…

mess

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Feb 2007 14:44:30 +0000

On this page you can find more information about my midibox projects * DSEQ32 - 32 step 8 track drum sequencer (almost finished) * Coresound - Pic based digital synthesiser

midiboxer_s

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Slang for a MIDIbox builder....

midibox_3396

anonymous@undisclosed.example.com (Anonymous) — Wed, 07 Aug 2019 14:15:14 +0000

MIDIbox 3396 :!: Project on Early Alpha Design Stage :!: This is a page for collecting ideas on how to build a synth based on the Curtis Electromusic Specialties CEM3396 IC chip, controlled via PIC of course. This chip is for example used in the Oberheim Matrix-1000 synth. It is out of production, but can be found at

midibox_ay_patch_menu

anonymous@undisclosed.example.com (Anonymous) — Mon, 29 Mar 2010 10:06:36 +0000

MIDIBox AY 3 8912 - PATCH MENU Access the PATCH MENU via F1 (C64 Keyboard) PATCH MENU Options: * Store A Patch (Patch 0) to Eeprom (PIC 18F Eeprom, no Bankstick1 needed) * Store A Patch (Patch 1 to 127) to Bankstick1 (BS) * Format Bankstick1

midibox_fm

anonymous@undisclosed.example.com (Anonymous) — Sun, 30 Nov 2008 22:02:27 +0000

This page has moved. Please update your bookmarks. ~~GOTO>:home:project:synthesizer:midibox_fm?5~~

midibox_seq4

anonymous@undisclosed.example.com (Anonymous) — Tue, 22 Mar 2016 18:04:21 +0000

This page has been moved to the MIDIDocs namespace: follow this link

midibox_seq4l

anonymous@undisclosed.example.com (Anonymous) — Tue, 22 Mar 2016 18:08:05 +0000

This page has been moved to the MIDIDocs namespace: follow this link

midibox_seq_quick_reference

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 May 2010 16:45:58 +0000

MB SEQ functions - quick reference Detailed info for options and functions is available at Print-friendly (on two A4 sheets) xls version available here # Function Description / Options Dedicated button functions (these can vary depending on panel design and MBSEQ_HW.V4 file)

midibox_seq_v2_4c

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

m Summary This page is to describe the files that come zipped with the MBSEQ v2.4c application, how to modify the files to fit your needs and then upload it to your PIC. The list of files contains links to pages that describe them in greater detail.

midimasterclock

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 18:16:36 +0000

MidiMasterClock-Projekt On the top of the picture you can find the backview (jackview). In the middle the frontpanel and on the bottom the peripherie. TOP - backview You can see 6 Channels [A-F]. Every Channel is made up of one MIDI-Out and a footpedal-in. Moreover you can find a MIDI-in and a Display out-jack.

mios_c_simulator_-_debugger

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 May 2008 02:13:00 +0000

AC-Sim: AudioCommander's Simulator for MIOS Applications. This has been named after it's creator but hopefully all MIDIBoxers will feel free to contribute to and share their code. Please see Release_and_Developer_Notes for version info. If you add something make sure, you note it here, otherwise your submissions might get overwritten!

neatest_pro_internal_wiring

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Feb 2007 09:38:36 +0000

Neatest/pro internal wiring for the fun, no prized rules This section is the place for the MIDIbox with the more “clean” and optimized wiring. Maybe don’t think “I will buy the more expensive connectors”, it will be a plus if your design can be done by everyone

ng

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Describe [NG] here.

noofny

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Feb 2011 11:35:44 +0000

Am in process of moving my NoofnyDeck Midibox project from my own site to here. Page currently resides here : Will have it here in... ...1...2...3...4...5...6...7...etc (soon)

oled

anonymous@undisclosed.example.com (Anonymous) — Sat, 09 Jul 2016 21:53:32 +0000

OLED Displays Introduction * Wikipedia OLED Technology OLED Displays devices provides better luminosity than a classical backlighted LCD. You can plug it as a LCD to your core module. It can be CLCD or GLCD. Supported Graphical-based Tested References * SSD1306 based

openpad-codeblock

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Jan 2023 01:20:54 +0000

OpenPAD Codeblock this is one essential part for my OpenPAD it handles the Menue and the Buttons... Shematic Building and BOM THT, and handsolder This PCB is needet 2x for OpenPAD Production Files Free4Real Order-List copy following list into this

open_source_projects

anonymous@undisclosed.example.com (Anonymous) — Sat, 28 Mar 2009 10:11:33 +0000

Open Source Hardware Other cool open source projects from around the net. * theutis.com - Open-Source MP3 player to listen to your MidiBox music on. * Yampp - yet another Open-Source MP3 player.(this one has USB capabilities) * Arduino - An open-source physical computing platform very cool programmable I/O board.

opl3_module

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:26:25 +0000

OPL3 Module OPL3 Module holds the sound generating ICs (YMF262, YAC512) used in MIDIBox FM Synthesizer. * OPL3 Module uCApps * OPL3 FM soundchip sources Parts: * Reichelt order list uCapps * Mouser order list SmashTV

peake

anonymous@undisclosed.example.com (Anonymous) — Mon, 02 Jun 2008 01:55:39 +0000

THANKS to TK, SmashTV, Stryd_One, Wilba, Ultra, Seppoman, Doug, Moogah, and the entire MIDIbox community!!! Currently built: One CORE, three DIN, AOUT_NG, DOUT. It only took an evening to stuff these boards. I note that the data stream on the DINs require attention while wiring. Simply connecting between boards does not appear to allow functionality; I'll have to confirm this as I build.

peterpressure

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Dec 2011 05:01:04 +0000

*BLM SCALAR* -Based on findbhudda's original design: ---------- DESIGN SOFTWARE USED: KiCAD for PCB/Schematics: ---------- KNOWN ISSUES / BUILD SUGGESTIONS: - blm-full_short.brd is a short version of findbhudda's original design. ----------

pic18f4685_8bit_lcd_driver

anonymous@undisclosed.example.com (Anonymous) — Tue, 10 Apr 2007 00:06:27 +0000

; ; MIOS Custom LCD Driver Example for character LCDs ; ; NOTE: this is just a template for LCDs which are different to ; HD44780 (that is natively supported by MIOS -> LCD type #0) ; Note also that this driver only supports a single CLCD ; and no free definable enable (E) line ; ; ========================================================================== ; ; Copyright (C) 2003 Thorsten Klose (tk@midibox.org) ; Licensed for personal non-commercial use only. ; All other rig…

pic_brennen

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

Falls ihr keinen PIC Burner oder JDM Module habt könnt ihr bei folgenden Mitgliedern euern PIC brennen lassen. Gebrannt wird der Bootstrap Loader. Mitglieder im Forum: ljmarkus schreibt uns im Forum eine Private Mail und ihr bekommt die Adresse vom Mitglied.

piezo

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 00:43:32 +0000

Piezo Introduction A piezo is a dielectric component that act like a high frequency speaker or a vibration sensor. It is commonly used in Electronic drums triggering. MIDIbox-related FIXME : advice some piezo caracteritics that could be used as good inputs on Ainser

psykhaze

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2016 17:13:48 +0000

Psykhaze (NeonKing) MIDI Hardware geek from France, Troyes , born in 1985. Project list Currently workin on: @12-11-2016 * mb-modulbox-ng * mb-digiroland * mb-resynth On standby * mb-scope Web * Open Modular * Youtube Channel Contact neon.king.fr(at)gmail.com * Forum Profile * Old Soundcloud * Old Myspace

references

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 12:22:55 +0000

Learning MIDI * MIDI Specification - good article about the MIDI protocol * simple_midi_specification - Midi in Hex for editors of .ini files * - MIDI Specification (German) I2C * - General I2C FAQ (English) * - Original-Specifikation NXP Semiconductors V2.1 (English) * - O…

reichelt_shopping_cart

anonymous@undisclosed.example.com (Anonymous) — Wed, 02 Apr 2008 10:36:58 +0000

The german store Reichelt provides the feature to store and import shopping carts. Note that in most cases often required parts like cables, batteries are not included. Please check against the official part lists on ucApps.de if you got all parts required before ordering!

scale-explorer

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Mar 2020 03:07:01 +0000

Scale Explorer V0 The Idea from Retriggering Melodys and Drums from a static drum-sequence, goes (for me) back into 2010... and endet in TriggerMatrix Later i wanted that with a non-static drumsequence - human input, electronic music meets congas drummer: KongaTrigga Then i run into the problem, that i dont remember of that thousends of scales which are possible when playing melodys

scs-oled

anonymous@undisclosed.example.com (Anonymous) — Tue, 06 Mar 2018 21:09:01 +0000

SCS OLED module Combination of 0.96“ SSD1306 OLEDs and switches for an SCS Schematic Refer to the SCS schematic or below for J1/button and encoder pinning and the Core module (J15) for J5/OLEDs. ---------- BOM v1.0 Type Part Value Caps C25

scs_module

anonymous@undisclosed.example.com (Anonymous) — Sat, 09 Jul 2016 14:05:53 +0000

Standard Control Surface (SCS) Introduction The Standard Control Surface (SCS) allows to edit some (but not all) configuration values without the need of a computer. Description A detented rotary encoder and 6 buttons are directly connected to J10 of the Core module to control the menu system.In addition a LCD is required. The recommended size is at least

seqv4plus_beat_led

anonymous@undisclosed.example.com (Anonymous) — Tue, 28 Nov 2017 22:13:09 +0000

Beat LED It's a way of putting a beat LED right in the middle of two le MEC boards and in line with the bottom row of buttons. No special holder or bezel is needed, although that would be an alternative. The LED could possibly be soldered directly to le MEC's J5 header, but I fear the legs will be too short. I need to check the final panel spacing to give more info, whether a header should be used to raise it etc.

seqv4plus_le_mec

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 Dec 2018 09:35:26 +0000

SEQv4+ le mec This board holds the SEQ's illuminated buttons, which are driven from a shift register matrix. The ENC-PLATE board stacks on top. Schematic A shift register chain of 3 DIN 74HC165 and 2 DOUT 74HC595 chips are used. Two of the DINs scan the encoders and one scans the button columns. The DOUT parts are connected into a matrix. Note that both the high and low sides have driver transistors (PNP and NPN, respectively). This means that the anode side of the matrix will operate with in…

serial_graphics_tablet

anonymous@undisclosed.example.com (Anonymous) — Thu, 26 Jul 2007 16:32:04 +0000

Below is an edited extract from an email I found on Google's Usenet Archive. I think there is enough information in there to allow us to use some older serial port graphics tablets as X-Y controllers under MIOS. If you are the original author of this post and wish to have it removed, please contact me through the Private Messages at midibox.org/forum

shortcut_trigger_for_enttec_light_factory

anonymous@undisclosed.example.com (Anonymous) — Thu, 29 Nov 2007 10:49:05 +0000

Introduction Well, it's pretty simple really. A control surface giving you access to the shortcut functions in Light Factory, without spending thousands on the Enttec wings. In theory in can support up to 128 buttons, but has only been tested with 32. 25 banks are available, with support for 600 shortcuts (could easily be expanded if need be).

sid_module

anonymous@undisclosed.example.com (Anonymous) — Mon, 11 Jul 2016 16:25:37 +0000

SID Synthesis Module SID Module holds the SID chip used in MIDIbox SID Synthesizer * SID Module uCApps

simple_cv

anonymous@undisclosed.example.com (Anonymous) — Sat, 16 Jul 2016 12:31:26 +0000

EASY CV Introduction Digital created LFO+ENV with CV-Output. No Displays, No Menues, Minimal buttons, much Scopes, much Led-Ring-Rotarys (Planed for LRE-8x2CS), one big UI with complete functions for one LFO+ENV Voice... switching between the UI-Voices is done from the BREAKOUTMODULES

smashtv

anonymous@undisclosed.example.com (Anonymous) — Thu, 28 Feb 2013 17:11:23 +0000

Hey all! I run a MIDIbox parts/kits store Some formatting tests: ~~CLOUD:100~~ the box contents Some more complex boxes the box contents the box contents -the box contents-

ssm2164_getting_started

anonymous@undisclosed.example.com (Anonymous) — Thu, 26 Apr 2018 19:28:00 +0000

ssm2164_seppoman pcb introduction seppomans building information;ssm2164_pcb the following informations are take from the midibox forum, its a collection of infos, without the claim to be 100% true, i will try to test the given information. Shematic not found anywhere

ssp_mmc

anonymous@undisclosed.example.com (Anonymous) — Sat, 16 Jan 2010 20:23:33 +0000

This wiki will follow the progress and final build of the midibox m.m.c unit (midi.machine.code). The reason for this was to provide an mmc unit that could apply standard mmc commands over 5 pin midi ports rather than usb. This unit will work in logic pro, pro tools , digital performer to name a few.

the_thing_by_mpro-ject

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 18:22:17 +0000

The Thing by Mpro-ject * German Blog * Forum Thread

tk_gm5_bulkorder

anonymous@undisclosed.example.com (Anonymous) — Sun, 06 Sep 2015 14:42:27 +0000

GM5 is an Atmel AVR based USB chip with preburned USB-MIDI firmware (out-of-the-box solution) This product has been developed by Schematics and Eagle file of the PCB: The chip works under Windows/MacOS/Linux with the common USB-MIDI-Driver, but there is also a custom driver for Windows available to overcome the Microsoft driver flaws (a drawback of the old MBHP_USB module)

tk_mbhp_core_lpc17_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sun, 28 Aug 2011 16:09:35 +0000

MBHP_CORE_LPC17 Bulk Order The MBHP_CORE_LPC17 bulk order is closed, a batch of 100 PCBs and MagJacks has been sold within ca. 1 week! :) The next batch will be handled by SmashTV.

tm5-codeblock

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:03:26 +0000

TM5 Codeblock this is one essential part for my triggermatrix5 it handles the Menue and the Buttons... Shematic Building and BOM 100 THT, and handsolder This PCB is needet 1x for triggermatrix5 BOM qty reference value mouser 3 ENC PEC11R-4015F-S0024 652-PEC11R-4015F-S24

tm5-dindoutgate

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 19:57:04 +0000

TM5-DinDoutGates it gives; 24 Digital Inputs 32 Digital Outputs * while 16 Outputs are used for UI * the other 16 are buffered, and are for use as 16 GAte/Triggger output at 5V Level The Board is fully SMD, and made for pick and place - so no soldering required!

tm5-gate-board

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 20:15:58 +0000

TM5 Gate-Expansion This are the Gate In/Out boards, 4 off them are needet to get 16x Gate-input/Trigger, and 16x Gate-Output Shematic Building and BOM You need this PCB 4times BOM qty reference value footprint MouserPartNr 1 Gate1

tm5-gateinput

anonymous@undisclosed.example.com (Anonymous) — Thu, 12 Jan 2023 01:01:40 +0000

TM5 Gate/Trigger Input this is one essential part for my triggermatrix5 * Levelshift from 5V to the for the MCU required 3V, with a Resistor Divider * Overvoltage Protectect with TVS-Diodes * Preamp-Section 5V, 3V or Pre-Amped input - can be set vie Jumpers and Potentiometers, the PCB itself should be mounted on the Groundplate off the housing, the housing should have a service-plate to access this Settings!:

troubleshooting_lcd_displays

anonymous@undisclosed.example.com (Anonymous) — Sun, 20 Jul 2008 12:43:07 +0000

Display Troubleshooting Common problems, if it isn't your soldering...... Wiring Errors Remember: There is no common standard for the display connector - You should get your LCDs datasheet to see the correct pinout. You can run a small application written to check to see if any of the data pins on the LCD are shorted out. You can read about it from the forum topic here:

ucoregb

anonymous@undisclosed.example.com (Anonymous) — Thu, 19 Feb 2009 22:09:42 +0000

ultracore group buy # 2 group buy is closed! sorry to all who are waiting so patiently. i'll send a PM this evening to those who haven't given me their paypal and shipping details. this is the second round of the ultracore group buy. image is below. pcbs are $16 USD plus shipping to your location. last time, shipping prices were pretty reasonable. i could send a few of them to europe for like five bucks or less.

upgrade_cs_step_a_mbsidv1_to_have_shift_function_on_menu_button

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 16:56:04 +0000

Menu Button as Shift button If you had an old mbSIDv1 with a CS Step A (5 select button, 1 rotary, and 1 menu button) and you have upgrade it to v2, you can simply have the useful Shift function on menu button when the main menu is displayed. Step-by-Step description

user_gallery

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Jul 2016 01:29:11 +0000

User Pages Show us who you are, and what you do with your custom made midiboxes! * Alan_Tarion * Altitude * Antichambre * ArumBlack * Audiocommander * Bosone * ChicagoJammer * ChinMuzik * cimo * Clearmind * Dano * Davo * Dengel * Dj3nk * Doc * DougWellington * DrBunsen * Durisian * Fairlightiii * findbuddha * flo * fluke * Goblinz * gomiboy99 * gslug * ilmenator * Jack * Jackchaos

velocity_converter

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:54:45 +0000

Velocity converter The converter is able to transorm a velocity value of an incoming midi message into another value. In this way you are able to change the velocity curve for your MIDI keyboard. There is a freeware software that allow you to change velocity curve : Midi velocity curve changer (Trombettworks Software)

wcore

anonymous@undisclosed.example.com (Anonymous) — Mon, 18 Sep 2017 06:07:14 +0000

wCoreF4 This is a cross-grade of the STM32F4 Core based on the Core407v breakout board from Waveshare. There are other versions of MCU breakouts, but the Waveshare one seems quite a reputable source with decent distribution and documentation. Pros * Slightly smaller footprint

where_to_order_components

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 17:53:55 +0000

Parts Suppliers by Country This is a list of mail order companies of different countries where you could buy the components. The tips where collected by MIDIbox Users in the last few years. Contribute! If you know some good distributors in your country, add them here to make other people happy!

wilba_mb_6582_builders_list

anonymous@undisclosed.example.com (Anonymous) — Sun, 02 Apr 2023 23:11:19 +0000

This is the official list of MB-6582 builders, with serial numbers. The list vaguely relates to the order in which people requested PCBs and how quickly they paid. People who bought only a base PCB and are building their own control surface are not on this list, because they are not building an

wilba_mb_6582_power_switch_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Wed, 17 Jun 2009 08:41:04 +0000

MB-6582 Power Switch Bulk Order I have about 60 (?) spare DPDT rocker switches that are identical to C64 power switch and fit the MB-6582 PCB. These come with SmashTV's parts kits already. So if you can get them from SmashTV, you don't need to get them from me. I'm only trying to make sure I have enough for everyone who needs them and avoid people having more than they really need.

wilba_mb_seq

anonymous@undisclosed.example.com (Anonymous) — Wed, 18 Sep 2013 12:24:30 +0000

MB-SEQ V3/V4 Introduction I'm working on a control surface PCB for MB-SEQ V3/V4. For now, info on this can be found in this thread: If you want to buy this PCB and optionally the parts to go with it, see this bulk order page: wilba_mb_seq_pcb_bulk_order wilba_mb_seq_parts_guide wilba_mb_seq_construction_guide Plans Here are the plans.

wilba_mb_seq_parts_guide

anonymous@undisclosed.example.com (Anonymous) — Wed, 07 Mar 2018 21:59:59 +0000

WORK IN PROGRESS Parts List This parts list corresponds to the PCB labeling on the Wilba Control Surface PCB sold by ModularAddict.com Name Part Value Quantity Reichelt Order Code MouserRegular Parts

wilba_opl3_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Feb 2010 02:24:00 +0000

OPL3 (MB-FM) Chipset Bulk Order OPL3 (MB-FM) Chipset Bulk Order #3 is FINISHED I don't have any more, sorry. Go here:

xyz-ir-controller

anonymous@undisclosed.example.com (Anonymous) — Sun, 09 Feb 2020 05:14:46 +0000

XYZ-IR-Controller Hack a Alesis PhotonX25 XYZ-Dome-IR controller or how to DIY Introduction The XYZ Dome works with 1 IR DIODE, and 4 IR Transistors, which are connected to 2x Stereo Audio ADC 24Bit running on Wordclock... I dont know if i can get the Alesis ADCs running (AL1101) - see Datasheet

your_page_name

anonymous@undisclosed.example.com (Anonymous) — Sat, 13 Sep 2008 14:59:49 +0000

MB-6582 PT-10 Case / Milling Bulk Order The enclosure used in Wilba's MB-6582 prototype: Is now set for a bulk order for North and Central America. The enclosure is available in Black and Bone, but this bulk order will only deal with the Black enclosure. In addition, those that take part in the bulk order will have the option to have the panels milled. The bulk order will close Nov.11, 2008. When adding your name to the list, please specify whether you would like your panels milled or not.Th…

gpbutton

anonymous@undisclosed.example.com (Anonymous) — Mon, 15 Sep 2014 21:56:26 +0000

GP Button General Purpose Button The 16 buttons near the top of the MIDIbox SEQ V4, just below the LCDs and the Step Encoders. The GP buttons are used to set trigger layer values, to activate menu pages when the MENU button is held, and for many other purposes. For general purposes, really.

community

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:39:16 +0000

Users user_gallery List Projects in progress project_in_progress Forum Bulk Orders bulk_order

choices

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 15:35:51 +0000

Before you build: Choices and Comments If you have a multimeter or voltmeter, it will come in handy for testing the power supply. You have a LOT of choices with this project. I would not describe this as a beginners level, it is complicated by the use of surface mount components, having to stack the boards correctly, requiring a bipolar power supply, and mostly by the sheer number of options that have to be decided along the way. If you are not familiar with mixing boards, your choices get eve…

loadapp

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 22:10:49 +0000

Getting the application into your mixer Most people will use MIOS Studio to do this. If your computer is Java-Impaired like mine, but you do have Perl available, you may use HEX2SYX.pl to convert your hex file into a System-Exclusive file. I have used both methods successfully.

preconfigsoftware

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 13:05:13 +0000

Software configuration Some software options must be made before compiling, others should be made after the application is loaded and running. These are the pre-compile options: The MIDIBox mixer supports named channels. You will find that reading “Yamaha MU90-R” is a lot more descriptive than “Channel Four”. These names are set in file “USER_LCD.inc”, beginning near line 101. You should find a group of sixteen lines that look something like this:

community

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:36:53 +0000

Users user_gallery List Projects in progress project_in_progress Forum Bulk Orders bulk_order

bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:39:03 +0000

Bulk Orders Bulk orders hosted by the MIDIbox community Regular / Ongoing Wilba has gone completely crazy! All

user_gallery

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:57:57 +0000

User Pages Paris France groupe_paris Le groupe d'utilisateurs de Midibox à Paris. stryd_one stryd_one this this

reichelt_shopping_cart

anonymous@undisclosed.example.com (Anonymous) — Mon, 01 Dec 2008 10:19:51 +0000

mb808

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Dec 2008 08:10:20 +0000

MB808 Intro MB808 is a modification of the MBSEQ designed to emulate the features of the Roland TR-808 Sequencer. This page is to describe the operation of the MB808 Sequencer application. It is a work in progress, comments are welcome and usually appreciated :)

midi_router

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jul 2011 14:52:55 +0000

MIDI Router Intro Midi Router is a project which allows you to route MIDI messages to/from multiple MIDI ports on the MIDIbox Please, if you decide to build a midirouter, take some photos before and after you put it in a case. Add them to a new forum topic and link

troubleshooting

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 23:57:22 +0000

Troubleshooting Reminder: -> Have you read the FAQ? Please add to this page any fixes to problems you have had. Don't forget to see troubleshooting specific to your project. FIXME Add links to all the troubleshooting procedures on ucapps.de and eventually convert them all to wiki format

picasm

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 Jan 2009 02:20:27 +0000

PIC ASM Here you can find tips, tricks, tutorials and documentation concerning the Microchip PIC assembler language. Tips & Tricks, Questions and Answers How to locate two lables at the same memory position? If you want to export a label for C applications, and you want to use the same name for the variable in C and ASM, you can do this in the way shown here (for example in module_xxx.asm):

windows

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 04:11:19 +0000

Windows Software Software Development Hardware Development KiCAD Layout Editor Eagle Layout Editor Eagle 3D POV-Ray Schaeffer Front Panel Designer Google SketchUp 3D InkScape Vector Graphics Editor http://www.electronics2000.co.uk/ Electronics Assistant Calculators http://www.miscel.dk/ MiscEl Miscellaneous Electronics Calculators Linear Technology Corporation LTspice/SwitcherCAD III Circuit Emulator MIDIBox Control Sun Java RE You need this to use MIOS Studio WIKI Microsoft O…

xplatform

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 03:01:46 +0000

Cross-Platform Software This software is the same on any Operating System MIDIBox Control JSynthLib MIOS Studio Forum FireFox Search Engine Plugin

libcan

anonymous@undisclosed.example.com (Anonymous) — Thu, 20 Dec 2007 16:21:05 +0000

FIXME Elaborate... Using libcan What is libcan ? libcan is library to use the ECAN feature of the PIC18F2682/2685/4682/4685. CAN (for Controller Area Network) is a communication bus for micro-controllers and, hence, enables easy communication between CAN-enabled PIC micro-controllers, such as th PIC18F4685.

aout

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:57:39 +0000

AOUT modules generate analog voltages (and gate signals) controlled by Midibox. Usually these are used to drive Analog Synthesizers. The following modules are available: AOUT Module uCApps AOUT_LC Module (low cost AOUT Module)uCApps AOUT_NG Module (new AOUT Module) The SHX8 module is used to extend the number of AOUT outputs using Sample and Hold chips

bankstick

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:48:24 +0000

The BankStick is a Plug & Play storage device used to store presets or configurations on the MIDIbox. * BankStick µCApps

bootloader-switch

anonymous@undisclosed.example.com (Anonymous) — Sun, 01 Apr 2018 21:00:56 +0000

BootLoader-Switch when activated it will force Core32 to bootup in Bootload mode, doesnt matter how buggy your progam is... you need: 2x wires 2x 2Pin-Header On-OFF Switch solder this like shown here: connect it to following pins of CORE32F4:

din_dout_pin_list

anonymous@undisclosed.example.com (Anonymous) — Sun, 30 Nov 2008 21:42:07 +0000

DIN & DOUT pin-numbers The following table shows the relation between pin- and serial-register-numbers on the software side, and physical pins and their labeling on the hardware side. Shiftregisters are always counted from 1 (also on the software-side), and pins are always counted from 0.

sid

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 10:47:13 +0000

SID Module holds the SID chip used in MIDIbox SID Synthesizer * SID Module uCApps

troubleshooting_lcd_displays

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:47:30 +0000

firmware

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Jul 2009 18:31:15 +0000

Firmware Troubleshooting Apps dout_buttons dout_enc enc_speed iic_midi_sw_loopback jitter_mon lcd_interconnection_test mbfm_interconnection_test mbfm_testtone mbsid_interconnection_test A CORE->SID Module Interconnection Test This application allows you to check the interconnections to the SID module with a multimeter. You can control the SID pins by sending a Modulation Wheel event to your MIDIbox SID - just connect a keyboard or use MIDI-Ox (View

cadsoft_eagle

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:48:41 +0000

CADSoft Eagle PCB Layout Editor CADSoft Eagle is a Windows application for doing schematics and PCB layouts. It is widely used in the DIY community due to a freely available version which allows you to design small boards with certain limitations. Installation

MIDIbox

forum_highlights_huis

frequently_asked_questions_faq

forum_highlights_sid

midibox_ay_3_8912

introduction_to_ucapps.de

mbqg_fp

forum_highlights

midibox_seq

wild_weasel

midibox_speakjet_k64_modul

midibox_tia

midibox_uc

drumstuff

mb_matrix

midibox_sid_faq

user_projects

building

dseq32

mbseqdocs

clock2audio2clock

protodeck

flo

forum_highlights_misc_projects

midibox_ay_ym_v2

antichambre

home

start

wilba_mb_6582

midibox_sid

projects

how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng

john_e._finster

mbhp_genesis

scs_pcb

aout_ng

midibox_ay_3_8912_envelope

project

lcd

forum_highlights_seq

martinsomerville

midibox_seq_v4

kristal

linux_mios32_toolchain_core

midibox_speakjet

groupe_paris

midibox_sid

stellax4

wilba

start

manual

midibox

lcd

mb-lre8x2cs_pcb_bulk_order

questionable

stryd_one

project

hardwareconfig

aout_ng

mb-twinsid

mb_rgb-led_matrix_8x8

midiboxfx_-_midifiying_analog_gear

encoders

sensors

user_contest2007

core

alternativesequencer

mb-lre8x2cs_rev4.6

midibox_quad_genesis

tpd_pcb

wilba_mb_6582_control_surface_construction_guide

wilba_mb_6582_license

home

chaos_matrix

mb-lre8x2cs_bulk_order_2014

midiboxlc

pedal_box

what_is_a_midibox

midibox_seq_v4l

applications