MIDIbox

john_e._finster

anonymous@undisclosed.example.com (Anonymous) — Sun, 11 May 2014 12:14:13 +0000

Midibox Stuff by John E. Finster Hi, my name is John. I live in Germany where I also studied Philosophy and Cultural Sciences. I became aware of TK´s ingenious Midibox Project in 2007 and started to learn how to build my own boxes. My first ones consisted of nothing more than a few pots and buttons, a display and a cardboard box. After a few financial crisis and the birth of our wonderful daughter I was forced to lay low for a few years and to take care of more important issues at hand (jobs, f…

wickedblade

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:40:20 +0000

This page is under construction, and I suspect that it will never reach completion, but I'll try to get it the closest possible to completion. August 2009 update: I'm currently implementing (i.e. making) the project. The final design is very close to what I'm describing here, but not entirely. When I finish it and if the results are good, I'll try to do a global update.

protodeck

anonymous@undisclosed.example.com (Anonymous) — Sun, 03 Jul 2016 13:19:15 +0000

ProtoFuse Protodeck Official Website THIS DEVICE IS USED EXCLUSIVELY BY PROTOFUSE AND ISN'T FOR BUYING. Preambule The problem is easy to understand: I wanted to drop my PC keyboard + mouse during live performance in order to be focused on music/sound/live. The only way to solve my problem was to use an hardware to control Ableton Live, but not only that, I need a feedback from it too.

frequently_asked_questions_faq

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 14:41:02 +0000

General Frequently Asked Questions (FAQ) FIXME Some updates needed out there This page summarizes the most frequently asked questions concerning the projects found on the website. It will be enhanced with every new interesting questions and will be modified with every new awareness. Feel free to ask in questions in the MIDIbox forum

dj3nk

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Sep 2008 11:03:54 +0000

Hello my name is dj3nk. many of you will think my nick has something to do with “deejaying”. hmmmm, not directly. I'm also hobby dj but its my “call name”, a short version of my familyname. so who has made this page ?? it's “de Jenk”. So enough of my nick coming to my (coming) midiboxes:

wilba_mb_6582_prototype

anonymous@undisclosed.example.com (Anonymous) — Thu, 06 Mar 2008 19:59:22 +0000

---------- MB-6582 (Prototype) These are the wiki pages I wrote about the MB-6582, my MIDIbox SID Synthesizer V2 project. Since there were a lot of people who want the PCBs, and even to make their own identical box, I arranged a bulk order of the PCBs and other bulk orders of the panels and parts. Thus my original

nils_bulk_terms

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Oct 2008 14:40:12 +0000

nILS' Bulk Order Terms and Conditions (v0.1) By participating in any bulk order that links to this page, you agree to these terms and conditions: §1 No Whining I'll keep everyone who participates in the bulk order posted about the progress and things they might need to do. If I don't post updates, there's a reason for it (spontaneous combustion, delay of shipping, no news

questionable

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:49:40 +0000

Questionable's Midibox Projects History: Several years ago, I started work on an Analogue Modular Synth (still unfinished), which was to include a Midibox Midi->CV component. Like the synth, the Midi->CV was never finished. Recently, I've been getting back into DJ'ing (Traktor) and playing around with visuals (VDMX), and wasn't happy with any of the controllers on the market for those uses. I decided to take another look at creating a Midibox controller, and thus this Traktor project was bor…

midibox_tia

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Oct 2020 10:18:04 +0000

MIDIbox TIA What is it? The Television Interface Adaptor (TIA) is the custom chip that is the heart of the Atari 2600 game console, generating the screen display, sound effects, and reading input controller. * Stella = Name (by its maker) of Atari hardware design engineer Joe Decuir's bicycle

m00dawg

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:26:26 +0000

m00dawg's MidiBox Projects Yo MidiBox Peeps! I just started working on this page, but it will be the future home of the boards and designs I have made over the course of making my own projects. You can also visit my website for stuff regarding my MidiBox projects, other hobbies, and my random blog posts about nothing :)

wilba_mb_6582

anonymous@undisclosed.example.com (Anonymous) — Sun, 06 Dec 2020 22:07:02 +0000

MB-6582 - MIDIbox SID Synthesizer V2 MB-6582 is a MIDIbox SID synthesizer. If you have no idea what that is, look here: More photos of MB-6582 during construction PCBs and knobs are now available at Modular Addict. For SID chips, PIC chips, panels, and any other parts you're having trouble sourcing, your best bet is to ask around at the forums.

audiocommander

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Jun 2011 06:12:15 +0000

Welcome to my User Page I searched long for a system I can build upon my musical and artistic artwork - and I am thankful that Thorsten opened this wonderful project and community to us ;) My real name is Michael Markert and I live in Nuremberg, Germany. I studied Communications-Design focused on Multimedia and am currently doing a postgraduated diploma at the College of Fine Arts in Nuremberg (Public Arts, Intermedia). The focus of my work and research is the development of intuitive interact…

stryd_one

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Oct 2007 23:30:55 +0000

stryd_one's MBlog The Home of Southpaw MIDIboxing ;) Introduction Hey MIDIBoxers! Here I plan to blog my progress on all things MIOS from now on. There are two areas I'll be focussing on, for now - stock MIDIBoxes, and a customized sequencer that I have been planning off and on for a couple of years now.

stuartm_stukontrol

anonymous@undisclosed.example.com (Anonymous) — Sun, 03 Jul 2016 13:05:57 +0000

StuKontrol - a MIDIbox64 project Idea and Development Background The idea to develop the StuKontrol is based on my first experiences using a MIDI controller to control Ableton Live in Session View to “perform” tracks in a live way. This first approach was with the Evolution UC-33, which had 8

tpd_pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2025 08:36:28 +0000

MIDIbox SEQ Track Position Display module Introduction Based on an original idea by Hawkeye who implemented an 8×8 LED matrix display to show the current track position in his MB SEQ, I designed the TPD module. It does not only provide an enlarged (and duo-color) LED matrix, but also a BPM display and dedicated tempo/BPM encoder, a step display, and four freely assignable buttons with adjacent duo-LEDs for status feedback.

forum_highlights_huis

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Oct 2010 03:55:22 +0000

MIDIBOX HUIs Forum threads and questions about the MIDIbox HUI projects. More information can be found at the MIDIBOX PROJECTS WIKI PAGE MIDIbox 64/64e * The Making of a MIDIbox64 * Where to Start?? * Where to Start?? * Adding MIDIbox64 LEDS? * Reducing the number of LED's in MIDIbox64 encoder LED rings * Sending different CC# based on encoder turn direction * MIDIbox64 with MAX-MSP?? * Simple MIDIbox controller using just a core module?? * Encoders outputting SYSEX Messa…

howto_create_a_pcb_english_german

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:43:16 +0000

How to create PCB's Exposure method (english) by dblevine@lindenmedia.com at 16.Oct.2001 in the MIDIbox Forum I'm sorry this took so long; I wanted to take some pictures, but I seem to have misplaced my digital camera? And if anyone finds anything wrong with my description, please tell me!

how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 13:32:29 +0000

How to create custom GLCD fonts/icons/bars for Midibox NG I compiled this tutorial mainly because there aren´t a lot of informations available on this subject and I spent days to figure this out. It requires some amount of work to implement custom fonts and icons in a Midibox_NG, which I will try to guide you through as well as I can. My programming skills are very limited, so there might be better and more efficient ways to do this. So I consider this approach just one possible way.

midibox_audiomatrix

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:04:55 +0000

MIDIbox AM (Audio Matrix) A digitally controlled matrix switched patch router for analog signals. Discussed here Below is a collection of comments from the thread. My goal is to organize them for the project. Concept From Nomical I would like to have/make an audio patchbay (having a yet to be determined amount of ins/outs due to any diy building difficulties) that has the option of routing any input to any output digitally. No hardware switches or anything, just hook up all the ins and ou…

midibox_sid_faq

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 12:04:26 +0000

MIDIbox SID FAQ FIXME FAQ is outdated, many details are not matching anymore with the current MIDIbox SID V2 implementation Do I need the most elaborate control surface to get some sound out of my SID? No. Although the dedicated control surface is the optimum solution to control the SID, you can control all sound parameters of your MIDIbox SID from a computer or from a common MIDI controller (although the MIDI controller option has some ergonomic limitations).

start

anonymous@undisclosed.example.com (Anonymous) — Tue, 08 Dec 2020 17:19:28 +0000

MB-SIDR8TR This is a project built around making a MidiBox SID in a 3U rackmount case using the MB-6582 mainboard. This is a huge work in progress however feel free to contribute! You can also follow this project on Github. Parts * 3U Chassis - Jameco Part # 132848

purpose

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Sep 2008 16:28:50 +0000

Project Overview: The MidiBox Mixer The MBMixer project was designed as a replacement for an old stereo line mixer that I built a few decades ago. It has served well, but the pots get old and scratchy, and it just seems so “old fashioned” to have to reach around the front of the rack to adjust the volume. So I decided to design a replacement that could never get scratchy pots, and maybe even add remote control by MIDI. After a bit of research, the PGA4311 chips were looking very promising. Sinc…

etching_pcbs

anonymous@undisclosed.example.com (Anonymous) — Mon, 01 Dec 2008 10:14:11 +0000

dougwellington

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 Apr 2012 12:39:07 +0000

NOTE (March 2011) While my own health is fairly decent now (my blood pressure is still a bit high), this last year has been a bit traumatic for my family. My father-in-law was diagnosed with pancreatic cancer on August 18, 2010, and he died November 28, 2010. Additionally, my daughter acrued over $11,000 US in medical bills. Yipes! I'm sorry about being offline so much lately.

dougwellington_mb6582_panels

anonymous@undisclosed.example.com (Anonymous) — Mon, 14 Feb 2011 05:49:41 +0000

MB-6582 Panels NEWS - February 2011 Sorry guys, this has been the worst two years of my life. What with my teenage daughter (who is now away at university, yay!!!) losing her brain, my son acting out and getting bad grades, my mother moving to Tucson, and my father-in-law being diagnosed with and dying from pancreatic cancer, well, optional things like MIDIbox projects got put on hold indefinitely.

jakes_daddy

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Jan 2007 20:32:27 +0000

Jakes Daddy's Wiki Page Welcome to my Wiki page, and the links to my MIDIBox project(s). About Me A little about me: I am a 35 year old web application team leader for a small company. I've been working in IT since leaving school at 16 (wow, thats 19 years and counting !), and at the weekends I am a semi-pro club DJ. I've been DJing for 13/14 years. I only play clubs or pre-club bars. I started playing vinyl (still got my beloved 1210's

lucem

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Jul 2009 17:37:30 +0000

Introduction This is the place to come when it comes down to my activity around MIDI and midibox. Some random photos of my house, my workshop, projects and whatnot About Über-nerd from Germany, born Jan 1982. Studying computer science, had professional training in high-frequency analog electronics, audio signal processing and digital circuitry. Heavy EAGLE user. Programmer since the age of 8, starting on Commodore 64. Languages include C/C++, C#, Java, Basic, Python, Perl, PHP, assembly (808…

tos_-_a_tds_controller_blog

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 22:05:44 +0000

ToS - Traktor Controller Blog The quest * Found uCApps About a year(or more) before this project was started, I accidentally stumbled upon a ucapps'es MIDIBOX Gallery, back then I haven't realized what this was all about(a free code, open architecture, everything on a plate

waldorf_knobs_bulk_order_fall_2013

anonymous@undisclosed.example.com (Anonymous) — Wed, 23 Apr 2014 10:32:02 +0000

kristal='s CLOSED Fall/Winter 2013 bulk order for the ALBS Waldorf knobs This is the CLOSED Fall/Winter 2013 bulk order for the ALBS Waldorf knobs used by the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from:

16x4blm_pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2025 10:36:12 +0000

MIDIbox SEQ BLM 16x4 Control Surface PCB In order to enhance my MB SEQv4 with an internal 16×4 BLM (Button LED Matrix) I have created the printed circuit board shown in the lower half of the picture below. It has been verified to work and you can find all the information necessary to build one yourself on this page.

dcb

anonymous@undisclosed.example.com (Anonymous) — Thu, 01 May 2008 14:41:31 +0000

DCB Digital Communications Bus Prior to MIDI, this was implemented on the Roland Jupiter-8 (some units) and Roland Juno-60 From Hyperreal: From tmoravan@netcom.comTue May 30 10:16:25 1995 Date: Tue, 30 May 1995 03:57:58 -0700 (PDT) From: Tom Moravansky

frailn_ay-3-8912_mini_sale

anonymous@undisclosed.example.com (Anonymous) — Fri, 15 Aug 2008 16:18:37 +0000

FRAILN AY-3-8912 MINI SALE CURRENT STATUS CURRENT SALE IS CLOSED. I will not run another one since my supplier's prices have gone up. If you missed out on this sale and are interested in purchasing AY-3-8912 chips, you can go to the following site:

mb_matrix

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Feb 2015 09:36:01 +0000

MIDIbox Matrix - MIDI Matrix with 56 Inputs and 56 Outputs This MIDIbox implements a 56-port MIDI matrix/router using a core board and an FPGA-based add-on board together with a set of break-out boards and modules that allow for physically placing your MIDI ports where you actually need them.

mcan

anonymous@undisclosed.example.com (Anonymous) — Fri, 03 Aug 2018 12:53:45 +0000

MCAN, MIDIbox Controlled Area Network Low cost MIDI(Native) Network using CAN, this is MCAN... ---------- Why? Because we CAN ... ha! I'll stop joking. :) At home I have no space to put my equipment in the middle of the room and maintain an access space behind to rewire the machines for each session. It is boring having to do it every time, especially to waste time and lose inspiration between two takes. For Audio, no problem, I've got a good and very large patchbay. For MIDI I've got…

selfservice

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:39:50 +0000

Who am I Hi, this is the Selfservice's Midibox page. My name is Stefano a.k.a DJ Stè and I'm from Italy (so, excuse me for my bad English and feel free to correct me!). I'm studying electronic engineering, I'm a deejay and a d.i.y enthusiast. But stop talking about me, if you are interested go to my

waldorf_knobs_bulk_order_2013

anonymous@undisclosed.example.com (Anonymous) — Sat, 09 Feb 2013 12:25:13 +0000

kristal='s 2013 **CLOSED** bulk order for the ALBS Waldorf Knobs This is the 2013 bulk order for the ALBS Waldorf Knobs used on the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from: * Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-weiß (opaque white)

waldorf_knobs_bulk_order_april_2013

anonymous@undisclosed.example.com (Anonymous) — Fri, 26 Apr 2013 14:26:22 +0000

🙆 kristal='s CLOSED April 2013 bulk order for the ALBS Waldorf Knobs 🙆 This is the April 2013 bulk order for the ALBS Waldorf Knobs used on the MB6582 and the SEQ4 datawheel. * Forum thread for this bulk order: You can choose from: *

waldorf_knobs_bulk_order_spring_2014

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Jun 2014 09:56:29 +0000

kristal='s *CLOSED* bulk order for the ALBS/Waldorf knobs This is the Spring/Summer 2014 bulk order for the ALBS/Waldorf knobs used by the MB6582 and the SEQ4. * Forum thread for this bulk order: You can choose from: * Drehknopf DK11-170 A.6/4,5 vertieft (recessed, black), see

wilba

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:41:32 +0000

---------- Wilba's MBlog Introduction I've been tinkering with MIDIbox stuff since 2003, mostly playing with MIDIBox SID synth, and also started off the MIOS Studio project. I discovered ucapps.de while playing with low-end PICs and MIDI and needing something with more grunt to achieve my own MIDI controller ideas.

wilba_mb_seq_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Fri, 02 Jan 2015 16:03:17 +0000

MB-SEQ V3/V4 PCB Bulk Order This list is no longer active. SEQ cs boards are available at my shop: After I finish my MB-SEQ V3/V4, I will run a bulk order for PCBs. THIS IS NOT A KIT!!! This is a bulk order for PCBs and some matching parts.

apparat_20_construction_blog

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 16:15:24 +0000

"Apparat 20" construction blog (“Apparat” is an old-fashioned german word for a telephone or also for the extension number of a phone.) As I just started with my next MidiBox project, I thought this time I´ll have to contribute a build blog. So here we go:

arkade

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Jul 2016 01:54:43 +0000

MB Arkade Introduction Arkade is a MIDI controller that embeds pairs of everything :-o : * A pair of analog joysticks coming from a canibalized PS2 gamepad ^_^. They center when you release them (+ they're rock solid !) * A pair of standard analog joysticks (positions doesn't change when released)

bosone

anonymous@undisclosed.example.com (Anonymous) — Tue, 13 May 2008 12:33:15 +0000

Bosone - Alchemy Studio page Hi! i'm an italian midiboxer, hobbyist musician, producer, fan of DIY projects... My first midibox was built in 2000 (i think), it was the very first midibox 16 and it was placed... in a shoebox! when i built the first midibox i knew absolutely nothing about soldering and electronics, and thorsten helper me a lot (thanks again!!!)

coresound

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Nov 2007 15:24:08 +0000

This page will contain all of the information about the Coresound synth link to forum topic: Introduction Coresound is a digital synthesiser module based on the midibox platform. todo: add more info Features * Digital synthesiser for microchip pic microcontrollers

lre-oled-bar

anonymous@undisclosed.example.com (Anonymous) — Fri, 04 Feb 2022 14:22:59 +0000

LRE8x2 096 SSD1306-BAR for Eurorack I made this PCBs to use it with Fairlightii´s mb-lre8x2cs_pcb 4x PCBs on one 100x100mm there is no V-Groove, you have to cut it on the marking groove it on top and back, with a new sharp cutter, do it several times, then break it

midiboxdmx

anonymous@undisclosed.example.com (Anonymous) — Wed, 25 Sep 2013 12:29:28 +0000

Intro Midibox DMX is a DMX512 compliant controller for Midibox created by Phil Taylor - phil@taylor.org.uk Originally Discussed here Here is a picture of my test system, It is enclosed in an old Strand Tempus 2-12 case (I bought 4 very cheap!). Concept

mios_faq

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Oct 2012 06:43:29 +0000

MIOS8 FAQ I plan to build a tiny foot controller, should I use a reduced PIC16F based MIDIbox, or should I use the new PIC18F452 controller? You definitely want to use the PIC18F452, as it is available for the same price. Although MIOS offers mighty functions for much more complex applications, the handling will be much easier for you. Especially because of the

northernlightx

anonymous@undisclosed.example.com (Anonymous) — Tue, 21 Jun 2016 10:28:08 +0000

NorthernLightX's Projects My Own User Projects Power Supply * Overview * This is a general purpose Power Supply Unit (PSU) which outputs +5v, +9v, +12v and -12v, designed by Mendelt and myself. The main reason I wanted a PSU like this was that every C64 PSU brick I touched died on me within a few days. Instead of messing with years-old stuff, I would rather have something new.

ssm2044_pcb

anonymous@undisclosed.example.com (Anonymous) — Wed, 22 Jun 2016 00:25:45 +0000

Dual SSM 2044 VCF SSM2044 PCB Bulk Order Warning: This is not a suitable project for absolute beginners. The soldering isn't very difficult, but you will need either an AOUT_NG (SMT soldering required), an AOUT module (which needs to be expanded with the bipolar option) or two (!) AOUT_LC modules, or another type of CV source to control this module, in addition to the actual synth (SID/FM) you want to use it with. So a bit of soldering experience and knowledge about the MidiBox platform is def…

arumblack

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Sep 2008 17:28:15 +0000

ArumBlack's User Page I'm going to try to figure out this wiki thing and post some of my work here. Wish me luck. Stock Projects MB SID I'll try to dig up some pics of this, my first midibox. it is currently being cannibalized for other projects.

chaos_matrix

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 20:18:52 +0000

Chaos Matrix Introduction Chaos Matrix is a programmer for an Oberheim Matrix 1000 analog synthesizer built by Patrick Manderson. It's capable of manipulating all 126 voice parameters including 10 programmable matrix modulations buses, ramp generators, 5 point tracking generator, 3 five stage envelopes, 2 oscillators, 2 LFOs, and much more.

compiled_c_code_size

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Nov 2006 13:15:15 +0000

From jackchaos via Code Optimization From I've been watching my code block size increase steadily as I work on my project and I'm now aware first hand of how assembler can be much more efficient that what a compiler can do. I wanted to share a method I use to determine if my C optimizations are reducing the code size.

durisian

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:33:06 +0000

I'm Durisian. I live in Melbourne, Victoria , Australia. In the real world I work as a Theatre Technician. Projects Pedal Box This is my first project. It started out very simple, but has grown into a massive project. It uses a custom application to allow for up to 8 CV pedals, and an LCD display.

gm5x5x5_-_allied_parts_list

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Jan 2013 16:01:53 +0000

GM5x5x5 Parts List for Allied Electronics This is a price list to be used with Allied Electronics for the gm5x5x5 module, version 1.1 (Red PCB). One of the reason I prefer Allied over, say, Mouser is faster shipping to my house (turn around time is 1 day at the cheapest shipping most of the time). Mouser has a larger selection, however, though Allied does offer some items cheaper and their customer service has always been extremely nice and helpful.

gslug

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Feb 2012 23:20:40 +0000

Hello, I'm gslug (or Kevin). I only recently stumbled across MIDIbox and am now in the process of collecting parts for an MB6582. Whilst waiting for the last parts to arrive I am attempting to get to grips with Eagle and lay out a PCB for a C64 replacement PSU. My next build will probably be a Midibox CV as I have become rather addicted to collecting vintage analog gear. More to follow once I start building things.

kristal

anonymous@undisclosed.example.com (Anonymous) — Fri, 12 Sep 2014 17:12:07 +0000

O hai! I iz in ur space-time continuum, upsetting all your gravity and quantums and stuffs → → → ---------- Bulk orders → My successfully finished bulk orders: * Albs Waldorf knobs bulk order 2012 * Albs Waldorf knobs bulk order 2013 * Albs Waldorf knobs bulk order april 2013 * Albs Waldorf knobs bulk order fall 2013 * Albs Waldorf knobs bulk order summer 2014 → My upcoming bulk orders: * SEQ4 Aluminium Case and Frontpanel Bulk 2014 * Albs wish list ----------…

mb-lre8x2cs_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 17 Jan 2013 14:25:31 +0000

IMPORTANT FOR BULK ORDER LATECOMERS ! This bulk order is officialy closed but I have bought some extra PCBs for latecomers. If you want ones, email me (jeromebo at free dot fr) the quantity you would like and your personal informations: * Midibox username

mb_2069

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Nov 2017 12:10:49 +0000

MIDIbox 2069 A Module based on Korg Music Voicing System NJM2069. The IC NJM2069 First some words about the chip. Some of you already know it. It's present in some KORG products from the 80s, in Analog Hybrid Synths like the DW and EX series, DW-6000, DW-8000, and the Poly800

midibox_quad_genesis

anonymous@undisclosed.example.com (Anonymous) — Wed, 20 Dec 2017 21:19:40 +0000

Page under construction! Summary MIDIbox Quad Genesis (MBQG) is a homebrew synthesizer project in progress, designed and built by Sauraen and originally commissioned by Josh Whelchel. It runs up to four sets of YM2612/YM3438 (OPN2) + SN76489/94/96 (PSG) sound chips, one set of which roughly comprised the sound generation hardware in a Sega Mega Drive / Genesis. The synth is powered by a STM32F4 core running MIOS32, and is based on MIDIbox hardware and software throughout.

mios_c_simulator_-_debugger

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 May 2008 02:13:00 +0000

AC-Sim: AudioCommander's Simulator for MIOS Applications. This has been named after it's creator but hopefully all MIDIBoxers will feel free to contribute to and share their code. Please see Release_and_Developer_Notes for version info. If you add something make sure, you note it here, otherwise your submissions might get overwritten!

phunk

anonymous@undisclosed.example.com (Anonymous) — Mon, 10 Jan 2011 20:41:52 +0000

---------- Phunk´s MB Wiki Page Introduction Hey, my name is Alex and I am based in Munich / Germany. I´ve started my first MB project many years ago with a MB16 based controller and a PIC burned by TK himself ;-) I discovered ucapps.de while playing with my very first softsynths (Creamware Pulsar) looking for gear to control them.

soldering

anonymous@undisclosed.example.com (Anonymous) — Tue, 07 Jun 2016 21:27:22 +0000

Soldering FIXME Update this page with more pictures at least Soldering well A quote from Ask Dr. Solder sums things up quite well: Q: How long should it take to make a “good” solder joint on a common solder pad? A: Tricky question! The time spent on the pad is called

synchromesh

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Aug 2014 20:35:50 +0000

Hello, I'm John Pallister, a programmer, musician and parent from New Zealand, currently living in Norfolk, England. I'm interested in the GM5x5x5 Module because I can't get Windows 7 drivers for my emagic Unitor/AMT8 interfaces, and Doug Wellington owes me $100. For more information (including my

sync_4_newbies

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:06:11 +0000

Adding Sync to your MB Sequencer I (dcer10) am new to electronics myself and I found it difficult to get sync working on my sequencer, so to avoid anyone else having this problem again here is the correct way to add sync to the sequencer. I must also state that I came across this information with the help of seppoman, stryd_one, TK, and Bill. I can not claim ownership of the solution!

troubleshooting

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 13:01:56 +0000

Troubleshooting Have you read the General FAQ? Golden Rules of Troubleshooting Hi, I'm stryd_one. I'm a professional IT engineer who fixes bugs for a living, and I've been hanging around here long time, and seen a lot of bugs come and go.... Here are some tips which would solve 99% of the problems I've seen. I hope that you'll pay attention to these rules, and that they'll help you too!

waldorf_knobs_bulk_order_2012

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Oct 2012 17:49:47 +0000

kristal='s CLOSED 2012 bulk order for the ALBS Waldorf Knobs This is the September 2012 bulk order for the ALBS Waldorf Knobs used on the MB6582. * Forum thread for this bulk order: You can choose between: * Drehknopf DK16-190V3 A.6/4,5 AT=14 schwarz soft-weiß (opaque white)

wilba_mb_6582_control_surface_construction_guide

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Dec 2020 15:13:11 +0000

Some preliminary pictures of construction which will be properly annotated in future (as part of my MB-6582 photoset on Flickr): I still have not fully completed the control surface construction guide. I advise people NOT TO SOLDER ANYTHING to the control surface PCB until you read the finished control surface construction guide.

wilba_mb_6582_control_surface_parts_list

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Dec 2010 03:22:47 +0000

The control surface PCBs are designed to work with the following parts: * PacTec PT-10 enclosure * 1.5mm anodized aluminium panels, the same dimensions as the PT-10 aluminium panels, but without mounting holes in the corners. The panel is mounted to the case using screws glued to the panel underside. The PCB is mounted to the panels using threaded spacers glued to the panel underside.

wilba_mb_6582_psuopte

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 Sep 2018 17:23:33 +0000

MB-6582 PSU option E With a new source for PCBs, here have been a lot of questions about how to run an MB-6582 from a single voltage source. There are a couple threads in the forums on the topic, but I wanted to add a page to the wiki to make sure new builders see that this is and option.

windows_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 04 Jul 2012 18:37:27 +0000

Core Toolchain Setup for MIOS application development on Windows Don't forget The QuickStart Guide! It's the quick and easy setup. It will work for nearly everyone. Please note that this page is only for MIOS8. For the more powerful STM32 based MIOS32, please visit

windows_toolchain_svn

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:41:50 +0000

SVN Client Setup for Windows MIOS Sources are now stored on an SVN server which uses SSH for secure transfers if you need write access. This has many advantages for us, but we may first need to setup a couple of tools. This document will provide a few different options, so don't worry if it looks big and confusing, just follow the steps, you can skip the parts you don't need, and you'll be ready in no time :)

constructing_enclosures

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 01:09:49 +0000

MIDIBox 64 : Building a case From the original by Tor Arne Case basics Now the front panel is done. What we need now is a case for all the electronics that are not mounted to the panel. This is for example the PCB and the MIDI plug sockets. Of course the case have to match the panel in some way. Again consider how you're going to use your box. If you'll be playing live with it I should probably be in metal to compensate for rough use. If not, wood or plastic is great. If your panel is 19

soldering

anonymous@undisclosed.example.com (Anonymous) — Mon, 01 Dec 2008 09:17:56 +0000

Good Soldering A quote from Ask Dr. Solder sums things up quite well: Q: How long should it take to make a “good” solder joint on a common solder pad? A: Tricky question! The time spent on the pad is called “dwell time.” A dwell time of 4 seconds at 700 degrees-F might be considered destructive for some components

alan_tarion

anonymous@undisclosed.example.com (Anonymous) — Mon, 19 Oct 2009 06:25:52 +0000

About me... My name is Michael and I live south of Munich in Germany. In the real world, I'm a computer programmer. My projects... I started to build up a MB-6582 in late 2008. In october 2009 it's nearly finished, I'm waiting for 3 more PICs and the waldorf knobs.

albs_waldorf_knob_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Mon, 16 Mar 2009 11:54:25 +0000

Albs Knob Bulk Order No. 5 Albs usually supply large orders of knobs (and other bits). Therefore they require a large minimum order. Giving the fact that there's so many people putting their names down for MB-6582 kits I'm guessing there will be a few more people wanting

cimo

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Oct 2012 15:44:01 +0000

hi you can see most of my projects on my website www.io-sound.org and follow our music colective new productions viewing our page www.colectivodrone.org PROJECTS: -Having a system -IIego an endless perpetuated, badly founded research for the perfect DJ/multipurpose controller -A “

dougwellington_marquardt_switch_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sat, 27 Dec 2008 22:59:31 +0000

Marquardt 6425 Series Switch Group Buy This bulk order is for Marquardt 6425 series switches. These are the same switches that are used in the Monodeck II. You can see details of these switches at Marquardt Tact Switches Web Page. I ordered some samples of these switches - you can see some pictures at my

easy_cv

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Aug 2016 02:03:53 +0000

EASY CV Test Equipment: CV-Destination MB33 MAM: Introduction All Parameters are saved as a preset as a song (programchange...) Digital created LFO+ENV with CV-Output. No Displays, No Menues, Minimal buttons, much Scopes, much Led-Ring-Rotarys (LRE-8x2CS)

euro-aout-ng-connector-board

anonymous@undisclosed.example.com (Anonymous) — Wed, 26 Jan 2022 03:27:45 +0000

EuroRack - AOUT-NG - IO-Port and Frontpanel PCB Size is 100x40mm Hardware Requirements * Soldering Iron - with a Dip that can Handle Thruhole-Parts solder Paste... * The other Parts from the BOM * a Midibox Core32 + Aout-NG

euro-midi-io

anonymous@undisclosed.example.com (Anonymous) — Fri, 11 Feb 2022 15:23:35 +0000

EuroRack - Midi IO - Board PCB Size is 100x40mm FIXME - The Connection from J1 to J2 is wrong - its 1:1 but it has to be crossed. Hardware Requirements * Soldering Iron - with a Dip that can Handle Thruhole-Parts and 1206 SMDs, solder Paste

fadercore_-_vlr-case

anonymous@undisclosed.example.com (Anonymous) — Fri, 12 Sep 2014 19:41:13 +0000

Fadercore Casing I desided to make a 2mm Aluminium bent case that supports the VLR-Frontpanel exactly. It will also have Holes to plug in the needed connections to my system. There will be a Network Connection for the use of RTP-Midi Module, 3.5mm Jack, MicroUSB Host, and a 220V T13 Plug to Power all that equipment inside. That brings me to the need of Powersupplies. I use two different supplies one 5V and one 12V both ordered my Mouser:

fantomxr

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 Jan 2015 12:37:39 +0000

Fantoms PCBs On this page I will list pcb designs I made. Some are tested, some are not. I will add a note to every PCB. Most of them are not that special. But they make the midibox-life easier. LED Ring This is a LED ring which contains 15 LEDs arranged in a ring and the last LED as indication-led for the switch of an encoder. The LEDs are 0805 SMD type.

findbuddha

anonymous@undisclosed.example.com (Anonymous) — Fri, 03 Feb 2012 07:58:21 +0000

All files on this page are for DIY/noncommercial use only. PM me on the forum for help/advice/whatever regarding my design. Big thanks to TK, nILS, Wilba and anyone else who helped! DESIGN SOFTWARE USED: ---------- All free software :) KiCAD for PCB/Schematics:

fnp-sid

anonymous@undisclosed.example.com (Anonymous) — Mon, 30 Mar 2009 04:15:57 +0000

fnpSID Module This page is dedicated to Flexinoodle's & nILS' stereo USB implementation MIDIBox SID v2. All information present on and files linked to from this site are © 2009 nILS Podewski. Free for private, non-commercial use. All other rights reserved.

gm5x5x5

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Sep 2017 08:42:36 +0000

GM5x5x5 Module BEFORE YOU START SOLDERING CHECK THE ERRATA PAGE This page is dedicated to nILS' standalone GM5 USB-To-Midi PCB. All information present on and files linked to from this site is (c) 2008 nILS Podewski. Free for private, non-commercial use. All other rights reserved.

goblinz

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Sep 2008 11:11:36 +0000

Goblinz Wiki About Me I live in Yorkshire in the UK and work as an applications administrator. I spend most of my life working, at festivals or at raves. I discovered MIDIbox through Wilba's MB-6582 which was posted on Hackaday and was thoroughly impressed by it and also the community that exists on MIDIbox. I'm planning on building a few more boxes after I finish my

ilmenator

anonymous@undisclosed.example.com (Anonymous) — Sun, 01 Mar 2015 14:14:17 +0000

Welcome to ilmenator's WIKI page. I'm a regular contributor to the MIDIbox forum, and in the last few years have worked on a number of projects involving MIDIbox modules. Some of them are worth documenting. You'll find them here. PCBs I have created a

introduction_to_ucapps.de

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 14:41:57 +0000

ucapps.de Introduction Wiki FIXME : Update things since it's very outdated The goal of this article is to provide new or potential users with a starting point. It is written to be brief and aims to cover the most frequently asked questions from the forum.

latigid_on

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Mar 2018 22:51:38 +0000

latigid on Profile Hi, I'm Andy! Originally from New Zealand and trained as a chemist, I've kept up with electronics since my early teens. I started off with bass and effects, then discovered Moog pedals and synths. More recently I've been exploring modular systems and novel tactile elements. Specifically I'm interested in new types of displays and controllers such as OLEDs, programmable LEDs and touch sensors. Below you can find work-in-progress links to my projects and modules.

lemonhorse

anonymous@undisclosed.example.com (Anonymous) — Sun, 22 Jun 2008 11:08:15 +0000

Hi, here some stuff of my MidiBox-Adventures: * My first User Project > MIDIbox AY 3 8912 * Midibox AY 3 8912 @ midibox.org Forum > Construction > MIDIbox User Projects midibox.org Forum * Pictures'n Notes Soundmaking and amorous adventure in electronics

lre-oled-bar2

anonymous@undisclosed.example.com (Anonymous) — Tue, 12 Sep 2023 14:24:05 +0000

LRE8x2 096 SSD1306-BAR for Eurorack V2 I made this PCBs to use it with Fairlightii´s mb-lre8x2cs_pcb PCB I didnt panalize it, so you have to do this when ordering the PCB online you will need 4 PCBs per LRE8x2... normally you want to order 8 PCBs (using 2x LRE8x2)

lylehaze

anonymous@undisclosed.example.com (Anonymous) — Sun, 16 Nov 2008 19:06:06 +0000

Welcome to my page. In addition to the MBMixer, I needed a place to put the code for MBStor. Hopefully this is it. MBStor is the “super bankstick” project that allows us to use USB flash drives for file storage. It also plays MP3 and some MIDI files, too.

mbhp_genesis

anonymous@undisclosed.example.com (Anonymous) — Fri, 20 Feb 2026 06:51:26 +0000

Summary The MBHP_Genesis module provides all the hardware necessary to support one of each YM2612/YM3438 (OPN2) and SN76489/94/96 (PSG) sound chips and interface them to a microcontroller (including one of the MIDIbox core modules). In addition, the circuit and board are designed so that up to four MBHP_Genesis modules may be stacked on top of each other to run up to four sets of sound chips, with simple pin/socket headers connecting the boards and no additional wiring needed.

mbqg_fp

anonymous@undisclosed.example.com (Anonymous) — Fri, 02 Feb 2024 15:01:51 +0000

MIDIbox Quad Genesis: Front Panel To build the front panel of MIDIbox Quad Genesis, you will need (details on each part below): * An aluminum front panel OR PCB Front Panel from Smithy (See forum post) OR 3D Printed Front Panel (See Below) * A PCB to hold all the buttons, LEDs, encoders, etc., and of course all these electronic components themselves

mb_visual_metronome

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 11:54:36 +0000

Visual Metronome Hi All, I thought I would share a little project of mine. At a recent show, there was a problem with the monitors leaving the rest of the band unable to hear the beat. We normally use a click track but it was not possible at this show. This lead me to come up with this design for a visual metronome so the others know where we are in the bar.

midiboxmixer

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 14:27:36 +0000

MBMixer Version 2 note: This page is an edit in progress. At this time the change to version 2 is near complete, but I may have missed a few details. Copyright (C) 2007,2008 Lyle Hazelwood (lylehaze@gmail.com) Licensed for personal non-commercial use only. All other rights reserved.

midibox_master_keys

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 Apr 2007 13:23:20 +0000

MIDIbox Master Keys The idea originally came from this thread, to enable a broken master keyboard that only sends on channel one, to have keyboard splits and send on other channels... Typical of me, I had to make my design for my “ultimate” master keyboard, and it's a modular kind of setup.

midibox_pokey

anonymous@undisclosed.example.com (Anonymous) — Tue, 14 Jun 2016 11:43:11 +0000

MIDIBox POKEY Q: What is it? A: A synth module for the MBHP based on the Atari POKEY (= POtentiometer and KEYboard) sound chip. It will eventually lead to a synth module like the SID or the OPL3 module. Current Status * MIDIbox POKEY 2 * 11/17/2007: More parts added

midibox_sd_card_sample_player

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 May 2012 21:14:47 +0000

MIDIbox SD Card Polyphonic Sample Player This is a brief description of a project to play back samples in real time from an SD card to an I2S based DAC on the Midibox. It will play a number of samples simultaneously, mixing the output to the DAC, the number of samples depends upon the performance of the SD card.

midibox_speakjet

anonymous@undisclosed.example.com (Anonymous) — Thu, 09 Jun 2016 01:17:44 +0000

MIDIBox SpeakJet MIDIBox SpeakJet Synthesiser is a project that uses the MagnevationSpeakjet controlled by midibox as a standalone synthesizer. The SpeakJet IC was brought to market in February 2004, and is available from a variety of vendors for around $25 USD. From the SpeakJet Web Site:

mios_pic18f4620

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:09:40 +0000

PIC18F4620 one of the Future Microcontrollers for memory intensive Applications A special variant of MIOS is available for the PIC18F4620. The usage of this processor is (currently) only required for the next major step of MIDIbox SEQ (V3), most other projects are running fine on a PIC18F452

msq-cc-bcr

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Feb 2018 02:52:14 +0000

MSQ-CC-BCR MotionSeQuencer for ControlChanges for BCR2000 by wireing it to MBHP Synth-Patch-Editor & Motion-Sequencer 4 ControlChange (= CC-Automation) Introduction Controls and automate my Nord Drum2 NORD DRUM 2 Realized by connect a BlackBox between Sequencer & Synthesizer

noofny

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Feb 2011 11:35:44 +0000

Am in process of moving my NoofnyDeck Midibox project from my own site to here. Page currently resides here : Will have it here in... ...1...2...3...4...5...6...7...etc (soon)

phatline

anonymous@undisclosed.example.com (Anonymous) — Thu, 07 Sep 2023 19:50:05 +0000

Phatline Electronic&Digital-Live-Musican DIY-man in everything I am really interested Europe, Austria - Katsdorf , born in 1983 take a break and listen to some music When I want to make a track, or do a gig, i want total control of parameters, and I want to move & save them all.

serial_graphics_tablet

anonymous@undisclosed.example.com (Anonymous) — Thu, 26 Jul 2007 16:32:04 +0000

Below is an edited extract from an email I found on Google's Usenet Archive. I think there is enough information in there to allow us to use some older serial port graphics tablets as X-Y controllers under MIOS. If you are the original author of this post and wish to have it removed, please contact me through the Private Messages at midibox.org/forum

stryd_one_mbhp

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

draft Before any of the hardware can be built, the preparation stpes must be followed. Next up, comes buying up the hardware. I am buying my stuff from SmashTV's shop. Firstly, I check the pages on ucapps to figure out what parts are required SID

wilba_mb_6582_base_pcb_construction_guide

anonymous@undisclosed.example.com (Anonymous) — Thu, 03 May 2012 23:38:32 +0000

MB-6582 Base PCB Construction Guide Please read the entire construction guide before buying parts or starting to solder anything. Note that Base PCB revision 1 (the red ones bought directly from me) has a few missing tracks. See the bottom of this page.

wild_weasel

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Jul 2016 01:49:13 +0000

SELEKTOR II [ ] This is Wild_Weasel little Midibox Traktor section.This is again a denon remote control unit retrofit, namely a RC-35 MK III for the DENON DN-2000F MK III cd-player unit. The unit was bought at ebay for approximately 50€. After testing the player, which still worked, I ripped it apart.

pc_editor_manual

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Dec 2009 06:05:25 +0000

Download PBPCE from HERE Errata OK, for a start, i'm not a real programmer, I've never worked in an object oriented envioronment before. This project has served my personal want to learn more about programming. So this is my first ever java application, without any formal training on the subject. It's buggy, cumbersome and lacks the finese of experienced programmers. But it makes working with PB a much more enjoyable experience.

midi_mapper

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jul 2011 14:53:45 +0000

MIDI Mapper Intro This page describes the MIDI-Channel-Mapper device, which can route input channels of a single hardware input to output channels of a single hardware output in any way you want. The device's user interface is designed to allow switching the routing of some channels while performing, leaving other routings untouched.

troubleshooting

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 23:57:22 +0000

Troubleshooting Reminder: -> Have you read the FAQ? Please add to this page any fixes to problems you have had. Don't forget to see troubleshooting specific to your project. FIXME Add links to all the troubleshooting procedures on ucapps.de and eventually convert them all to wiki format

building

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2014 19:53:12 +0000

MIDIdocs Building a SEQ V4 Forum Discussion Thread - for comments, corrections, or questions about this article If you're new to the MIDIbox universe, you might be a bit confused about how to actually build one of these things. What PCBs and parts you'll need, where to get them, etc.

core

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 06:03:47 +0000

MBHP Core Module About The mbhp Core Module is the heart and brain of every MIDIbox. It holds the PIC microcontroller which runs MIOS and your MIDIbox application. It handles MIDI communication, it drives an LCD (or two, or more), and it connects all the other modules. The main part of this module is the

lcd

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:36:14 +0000

LCD Module An LCD module isn't an MBHP module, you buy the LCD screen with the PCB attached and driver chips on-board, and that is your LCD module. Here you can find information how to use an LCD with the Midibox MBHP Core module. See also: Troubleshooting LCD Displays

18f4620

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Dec 2008 10:33:29 +0000

PIC18F4620 A special variant of MIOS is available for the PIC18F4620. The usage of this processor is (currently) only required for the next major step of MIDIbox SEQ (V3), most other projects are running fine on a PIC18F452 (MIDIbox SID V2 will run on a

albs_wish_list

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Jul 2014 18:15:57 +0000

ALBS wish list Some folks were asking me, if I could order some stuff from Albs after the bulk was over :) So in order to focus the demand, here's a wish list for a future ALBS bulk. I have no idea when this will happen, as this isn't my main focus right now -

antixfm

anonymous@undisclosed.example.com (Anonymous) — Thu, 14 Jul 2016 17:48:27 +0000

Antix Midibox FM Build Introduction I used MDF wood for the bottom and for the sides I used plywood with Zebrano veneer. The front and the rear panels are aluminium and a friend of mine made lasercutting in his workshop ( I designed it with Front Panel designer )then silkscreen ( an other friends in another workshop ) and at the end a layer of transparent acrylic.

aout_lc_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 23:46:46 +0000

AOUT_LC Module Introduction The idea behind the AOUT_LC module was to realize control outputs with parts that are easy to get in most countries. After a discussion with Karl Dalen about the difficulity to find DIY friendly DACs with a serial interface. He proposed these

blm16x16v2

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Feb 2023 15:47:48 +0000

BLM16x16+X V2 - Board for TriggerMatrix4 i used Latigid ONs PCB: blm16x16_build_guide, but i had only 2 PCBs, one for me, and one finally got Maxim Anokhin (Limewax), in order to get more Triggermatrices into the world I made my own Version for the upcoming triggermatrix5 Shematic Building and BOM

core4disc

anonymous@undisclosed.example.com (Anonymous) — Sun, 12 Feb 2023 13:42:48 +0000

Core 4 Discoveryboard STM32F407VGT6 this is one essential part for my triggermatrix5 i need a core pcb which is aviable in Europe, and uses the stm32F407VGT6 chip, which has 1MB ram... Shematic i think there is a error - PB2 is not connected to the CORE MODULE

core4discmidiex

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:13:42 +0000

Core4Disc Midi-Expansion this is one essential part for my triggermatrix5 Shematic Building and BOM Handsolder, easy project... BOM qty reference value footprint mouser 1 Midi1 Pin-Head-2×4 PinHead-Shrd-2×4-THT 649-75869-232LF 4 Midi-IN1-2, Midi-OUT1-2

dengel

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

I'm a Houston,TX based graphic designer that has been DJ'ing for about 6 years. I've recently transitioned to all digital afterbeing a vinyl jock. Lately, I have been getting into Ableton Live, and creating a control surface for Live is my first MB project.

displaydriver-smd

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:00:13 +0000

Display Driver - Board - for 18 SSD1306 Screens this is one essential part for my triggermatrix5 I need there 17 Displays, and i had good expierence with andys display_driver-board since i didnt want to solder this board by hand again - i created this board. its fully SMD, and made it pick and place ready - so no soldering required!

elektor_vocoder

anonymous@undisclosed.example.com (Anonymous) — Thu, 14 Aug 2008 16:14:59 +0000

I have now editied the OCR'd copy of the magazine articles that I found online and corrected formattin/spelling errors as well as labelling all the accompanying pictures to correspond with the correct figures in the articles. I have also started to create a website about the Elektor vocoder as there doesn't seem to be much in existence already. This may tale a while though as my experience with

english_version

anonymous@undisclosed.example.com (Anonymous) — Tue, 12 Dec 2006 18:44:39 +0000

! Click to Enlarge ! Features : * Mixing For Traktor V.2 / V.3....only 2 Decks ! * Volume, Low/Mid/High-EQ-Pots + Kill-Buttons, Gainpots * Crossfader * Deckeffect-section - Effectselection via Pot * Loopsection - 1,4,8,16-step buttons, prev-next Buttons

envelope-follower-bissel-based

anonymous@undisclosed.example.com (Anonymous) — Fri, 22 Jan 2021 02:06:34 +0000

Envelope Follower based on Harry Bissel a SMD Variant, ready for Pick and Place open-hardware, all Kicad-Files, and Gerbers are includet! --shown 2 identical boards on one pcb - to save money.. Features * audio in * Envelope out * Gate out + Gate Threshold-Poti

fadercore_-_fadermodule_for_audio_daw

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Oct 2014 16:54:57 +0000

Fadercore Fadercore is a Project to make a replicable and scaleable Fadermodule that can be used for DAW proposals. I started 2010 with that idea because i was Live Engineer of a concert Location. I used a software DAW for mixing because it was the cheapest console on market. Since then Behringer mixed up the market totaly my purposes changes. Now its just a fun Projekt to learn how to design an Electronic Product.

fadercore_-_vlr-3x8but

anonymous@undisclosed.example.com (Anonymous) — Mon, 28 Jul 2014 07:31:59 +0000

Fadercore Standard 220mm wide modules VLR-3x8But A PCB to add 24 Buttons with RGB LEDs for each. Eagle Files: BOM BIll of Material Allways look for the cheapest seller, the Price may vary heavy!!! And look for Local dealers preferred.

fadercore_-_vlr-8enc

anonymous@undisclosed.example.com (Anonymous) — Sun, 27 Jul 2014 21:23:16 +0000

Fadercore Standard 220mm wide modules VLR-8Enc A PCB to add 8 Encoders with LED ring for each. Eagle Files: BOM BIll of Material Allways look for the cheapest seller, the Price may vary heavy!!! And look for Local dealers preferred.

fadercore_-_vlr-8x16ledmeter

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Jul 2014 11:58:49 +0000

Fadercore Standard 220mm wide modules VLR-8x16LEDmeter A solution to add 8 Meters with 16 LEDs for each Meter. It contains 2 different Types of PCBs one is the LEDmatrix and the other a slim PCB to mount 16LEDs called meterboard. Eagle Files: BOM

fairlightiii

anonymous@undisclosed.example.com (Anonymous) — Tue, 25 Feb 2014 15:35:09 +0000

Welcome to my Wikipage. You will find technical informations of the 16 LEDrings / 16 Encoders Control Surface PCB: * MB-LRE8x2CS Rev 2.5 PCB here. * MB-LRE8x2CS Rev 4.6 PCB here. * The information of the bulk order of Nov-Dec 2012 (Rev 2.5 PCB)here. *

fixed_bor_setup

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

LCD Message “fixed BOR setup” * From the forum: The BOR feature is a brown-out reset, which resets the core if Vdd is too low. * From the Change Log: The “Brown Out Reset” (BOR) settings in the configuration sector are changed automatically when MIOS detects unproper settings - the appr. cell in this sector will be overwritten and the device will be reset.

flo

anonymous@undisclosed.example.com (Anonymous) — Tue, 02 Oct 2012 06:43:54 +0000

FX looper with MidiBox - Flo www.midibox.org/dokuwiki/flo flo user page ... under construction ... last edit: 2010-04-10 Guitar FX looper with MidiBox WARNING: THIS PROJECT IS IN PROGRESS SO IT IS NOT FINISHED YET! Requirements In General FX Bypass Loopers Multiple true bypass guitar FX loopers in one enclosure.

forum_highlights_sid

anonymous@undisclosed.example.com (Anonymous) — Tue, 05 Oct 2010 21:56:15 +0000

MIDIBOX SID Forums questions and threads about MIDIbox SID projects. More information can be found at theMIDIBOX PROJECTS WIKI PAGE MIDIbox SID V1 (expired firmware for PIC18F452) * Which SID CHIP?? * SIDControl VST-plugin * SID as a drum machine * The becoming of a MIDIbox SID * 4xSID photo blog * and another photo blog * MBSID in TB303 mode + CEM3378 + distorted filter * MBSID + CEM3378 * CEM3378 + SID idea * Please send me your MBSID Patches * Random SID Patches …

gm5x5x5_pcb_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Aug 2014 20:37:24 +0000

gm5x5x5 PCB Bulk Order This is a bulk order for the gm5x5x5 expansions board (PCB only) as described on the following pages/threads: * Forum thread for this bulk order: www.midibox.org/forums/index.php?/topic/12183-gm5x5x5-bulk-order-2-closing-feb-1st-2010/ * WIKI entry: www.midibox.org/dokuwiki/gm5x5x5 * WIKI pre-bulk entry: www.midibox.org/dokuwiki/gm5_expansion_5x5_board * Forum thread of the pre-order:

howto_program_a_pic

anonymous@undisclosed.example.com (Anonymous) — Sun, 15 Oct 2006 09:35:01 +0000

How to program a PIC16F87x or PIC18F452 :!: the term programming is used in this context for burning a hex file onto the chip. See what_is_a_midibox if you don't know the difference between MIOS, the bootstrap loader and a MIOS Application. For the MIDIbox project it is

how_to_organize_a_bulk_order

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Jun 2016 13:02:20 +0000

Guide to Organizing a Bulk Order Organizing a Bulk Order for the forum can be a much more involved task than expected. This guide is to help you make all the steps required for a successful Bulk Order. 1: Sourcing and Pricing * Post a thread in the Bulk Order Forum to arouse interest, and so people can scavenge the net for suppliers.

jackchaos

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:51:41 +0000

Introduction Started my first (and so far only) midibox project in the winter of 2006. The prototype was completed 3 months later, but it sat untouched for a very long time. In the summer of 2009, I was determined to finish the Chaos Matrix and began completing its construction.

jdm_with_picpgm

anonymous@undisclosed.example.com (Anonymous) — Mon, 22 Jan 2007 00:45:12 +0000

I've tested PICPgm v0.9.9.3 with my JDM programmer and it works. This version has support for burning the “ID Locations”, which is required for the bootloader and MIOS. It also supports PIC18F452, PIC18F4620, PIC16F88 and PIC18F4685. Download

jdm_with_winpic800

anonymous@undisclosed.example.com (Anonymous) — Wed, 02 May 2007 11:27:59 +0000

I tested my good old JDM Burner with Winpic800 because the actual PIC Burner doesnt work with some Computers :( Result : Winpic800 burns the most PICs what needed for the Midibox Projects * PIC 16F877, 16F88, 18F452 & 18F4620 :) not the 18F4685 (with JDM !!!) For 16F877, 18F452 & 18F4620 no changes are needed on the JDM

korg_wavedrum_midification

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Feb 2015 17:55:49 +0000

The Korg Wavedrum MIDIfied History of the Wavedrum In 1994 Korg released their first Wavedrum, an electronic percussion instrument. Unlike most other electronic drums this was not just a drum pad used to trigger samples. It was rather a physical modeling synthesizer, where the actual signals from the pickups were used as stimuli for various algorithms generating more or less drum-like sounds. Nevertheless, the

layout_improvements

anonymous@undisclosed.example.com (Anonymous) — Fri, 18 Nov 2011 16:04:33 +0000

Important Notes about new PCB designs The aim of this page is to give the community the possibility to publish improved layouts of MBHP modules. The original layouts by TK are mostly quick solutions with focus on “first-time-right”, and therefore not very well optimized with regard to area size or number of bridges.

lcd

anonymous@undisclosed.example.com (Anonymous) — Sun, 10 Jul 2016 15:05:52 +0000

Midibox LCD Module An LCD module isn't an MBHP module, you buy the LCD screen with the PCB attached and driver chips on-board, and that is your LCD module. Here you can find information how to use an LCD with the Midibox MBHP Core module. See also:

linux_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Mon, 30 Sep 2024 20:15:44 +0000

Core Toolchain Setup for MIOS32 application development on Linux Preparation This document assumes that you have a relatively modern x86 based linux distribution. While it may work other distributions, it has only been tested on x86 Ubuntu 10.10. Many of the commands, especially

loopa-eurorack-panel

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Feb 2022 21:27:46 +0000

LoopA - Eurorack - Frontpanel with breakout PCB I made this Breakout-PCB and Frontpanel for the midiphy LoopA midiphy LoopA PCB Size is 172x24mm You have to decide if you want Midi Out 3 or the Gate OUT (space thing) The Reset Switch and the SD, Card, are still on the base PCB

ludovic_drochon

anonymous@undisclosed.example.com (Anonymous) — Sat, 17 Sep 2011 17:18:04 +0000

I'm Ludovic Drochon AKA tatapoum. Please find link to photos of my Midibox realizations. * First Midibox SID Mono SID chip * Midibox SEQ * Second Midibox SID (work in progress) completely stuffed with 4 6581

martinsomerville

anonymous@undisclosed.example.com (Anonymous) — Sat, 06 Dec 2008 16:03:23 +0000

081207 - page created location: Australia HOME I was totally new to midibox and electronics and had limited midi exposure. I still have little idea (I will state incorrect info - please correct me by putting your name and the correction beside it).

mb-lre8x2cs_bulk_order_2014

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Dec 2014 21:03:18 +0000

BULK ORDER MB-LRE8x2CS rev 4.6 The time-frame of the bulk order is not still well defined but it should take place in april/may of 2014. You will find the technical informations about the MB-LRE8x2CS rev 4.6 PCB here. I need to know also how much is the interest for:

mb909

anonymous@undisclosed.example.com (Anonymous) — Mon, 12 Sep 2016 18:51:11 +0000

Home made prototype, finishing now 14th of February 2012 (and it works!!!) Intro This page is al about my TR909 looking sequencer. As soon as I have finished the sequencer based on the V4Seq with LPC board I will update this wiki page. I have the first PCB's at home for a beta test.

mbhp4066

anonymous@undisclosed.example.com (Anonymous) — Fri, 28 May 2010 21:07:16 +0000

The MBHP_4066 Board For MIDIfying old analog Sound gear You'll need bilateral switches in some cases. In my case I needed more than 100 of them! For that reason (and with the engaged support of nILS and PCB Mike) the MBHP_4066 board was created.

mb_rgb-led_matrix_8x8

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Aug 2014 18:33:23 +0000

MIDIbox RGB-LED Matrix 8x8 The RGB LED matrix described here can be used to signal feedback to the user, as for example in my MIDI Matrix with 56 Inputs and 56 Outputs. But, it can also be used for fancy stuff, Vegas mode, bling, impressing your neighbours,... Overview The PCB is as wide as the RGB LED modules themselves, with enough space above and below for mounting holes. This means that the modules can easily be chained horizontally in order to create type crawls. If you cut off the to…

mess

anonymous@undisclosed.example.com (Anonymous) — Thu, 08 Feb 2007 14:44:30 +0000

On this page you can find more information about my midibox projects * DSEQ32 - 32 step 8 track drum sequencer (almost finished) * Coresound - Pic based digital synthesiser

midibox_ay_3_8912_envelope

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 May 2011 17:44:13 +0000

MIDIBox AY V1 - Envelope MIDIBox AY - Envelope Control Menu * Just press F5 to have a look at the MIDIBox AY ENVelope options (@ the MIDIBox AY Envelope User Menu). ::: :: : MIDIBox AY - Envelope Mode: ON/Off AdjustOn or OffENV. Mode Tone A, B or C

midibox_ay_3_8912_mixer

anonymous@undisclosed.example.com (Anonymous) — Fri, 13 May 2011 18:13:13 +0000

MIDIBox AY 3 8912 Mixer * OP AMP Mixer (Tone ABC) for the MIDIBox AY 3 8912 (Ver. 1a) Notes: * Pot R4 (Volume Tone A), R5 (Volume Tone B) and R6 (Volume Tone C) are designed for volume finetuning (not for turning off tone A/B/C) Pot Options:

midibox_lc

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Aug 2016 17:58:45 +0000

Steven_C started an english MIDIboxLC FAQ a while ago in the forum Updated and translated from the German version By Digineural (aka Dan) Which modules do I need for Midibox LC? * 1x core module with PIC18F452 * 1x graphic LCD (240×64 of pixels) or 2 characters LCDs (2×40 characters) or 2 GLCDS (2x

midibox_pokey_2

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Sep 2016 07:48:15 +0000

MIDIBox Pokey 2 Many years ago, back in 2007, nILS began his work on the MB-POKEY which is documented here on the Wiki and on the Forum New projects came along that he maybe found more interesting, so now we have picked up from where he left to at least continue the work a bit further.

noofnydeck

anonymous@undisclosed.example.com (Anonymous) — Tue, 15 Feb 2011 11:37:04 +0000

Just a placeholder for now...am moving everything from my blog to here, where it belongs. Sorry about how long this will take, for now the home resides here : _

openpad-codeblock

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Jan 2023 01:20:54 +0000

OpenPAD Codeblock this is one essential part for my OpenPAD it handles the Menue and the Buttons... Shematic Building and BOM THT, and handsolder This PCB is needet 2x for OpenPAD Production Files Free4Real Order-List copy following list into this

opl3_module_modified

anonymous@undisclosed.example.com (Anonymous) — Tue, 28 Jan 2014 11:40:13 +0000

MBHP_OPL3 module modifications, the 5V option The MBHP_OPL3 module originally has three TL074 op-amps, and a circuit that needs +/-12V bipolar power supply. In Wilba and nILS sammichFM, they use two OPA4348 rail-to-rail op-amps, that can be powered by 5V. Sauraen suggested another 5V rail-to rail op-amp, the MCP6004, which is pin compatible with the TL074, and a way to modify the OPL3 module to use these.

parts_faq

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Jun 2016 12:47:58 +0000

Parts FAQ (Frequently Asked Questions) What wattage resistors should I buy? 1/4W (.25watt) or higher will work fine for everything midibox, unless otherwise noted. What voltage capacitors should I buy? The whole MBHP works on 5V, so all Caps should be at about

pcd8544

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 Nov 2011 16:55:23 +0000

PCD8544 LCDs are very small and providing only a resolution of 84×48. But they are connected via a serial interface with a small number of wires to the MIOS-Core, therefore up to 8 LCDs can be handled by the driver w/o performance loss. It's possible to use three of the displays as KS0108 replacement for MIDIbox LC, but you can also use it with any other MIDIbox

peake

anonymous@undisclosed.example.com (Anonymous) — Mon, 02 Jun 2008 01:55:39 +0000

THANKS to TK, SmashTV, Stryd_One, Wilba, Ultra, Seppoman, Doug, Moogah, and the entire MIDIbox community!!! Currently built: One CORE, three DIN, AOUT_NG, DOUT. It only took an evening to stuff these boards. I note that the data stream on the DINs require attention while wiring. Simply connecting between boards does not appear to allow functionality; I'll have to confirm this as I build.

pickit2

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:47:40 +0000

**HOWTO PROGRAM A PIC18f452 WITH A PICKIT2** This page is here in hopes of helping somone else avoid having to go through what i did in figuring it all out.(--chr0n1c) The Pickit2 USB Programmer WILL generate the required voltages for HVP programming of the chip.

rio

anonymous@undisclosed.example.com (Anonymous) — Wed, 07 Mar 2007 15:12:18 +0000

Hello everybody I want say hello to all midibox members and will be use this section to introduce my own build ups and developments here... MIDIBox SpeakJet K64 Modul MIDIBox SpeakJet K64 Modul

scs_pcb

anonymous@undisclosed.example.com (Anonymous) — Sat, 11 Sep 2021 09:09:29 +0000

MIDIbox SCS Standard Control Surface module The SCS module implements a standard user interface that is available as a module in the MIOS codebase. It goes nicely with a 20x character LCD and connects to J10 on the core board. An application example can be found in

seppoman

anonymous@undisclosed.example.com (Anonymous) — Mon, 17 Sep 2007 07:07:37 +0000

Seppoman´s Wiki page Welcome to my Wiki page (under heavy construction...) Modules AOUT_NG SSM2044 PCB New Midibox project(s) Apparat 20 This will be the combination of a MB FM together with an Alesis Metavox vocoder both built into a nice 80ies telephone Apparat 20 construction Blog Der Brat. 3000.

seq4_aluminium_case_and_frontpanel_2014

anonymous@undisclosed.example.com (Anonymous) — Wed, 03 Feb 2016 14:09:10 +0000

SEQ4 Heidenreich Case Bulk 2014 Please use your full and correct FORUM NAME (≠ wiki name!), so I can reach you via PM. Setting up your forum account to send you notification emails when getting PM'd is a good idea, too. Please only edit the list, thanks!

seq_c64_keyboard_mod

anonymous@undisclosed.example.com (Anonymous) — Fri, 16 Sep 2011 23:40:35 +0000

MIDIbox SEQ v3 inside a C64 case, using its keyboard It's possible to save some time and money building the SEQ into a Commodore 64 case and re-purposing the keyboard, so that each key corresponds to each of the buttons expected in the original project.

siliconheaven

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Aug 2014 20:54:02 +0000

February 20, 2013 GM5 Chip Interest page! NO PCB“S! THIS IS NOT A BULK ORDER! This is only to show your interest in purchasing the GM5 chip and hope someone with more bulk ordering experience will take over. I am only trying to show sellers we have enough interested buyers in waiting.

sinesurfer

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 Mar 2009 20:42:50 +0000

Ok, the first entry, a tutorial for DIY labeling aluminum panels, like on my elSID mbSID stereo box:

stryd_one_codeblocks

anonymous@undisclosed.example.com (Anonymous) — Fri, 05 Oct 2007 23:29:36 +0000

:!: :!: :!: :!: :!: This document has been superseded and is kept for archival purposes only!!! Please see the new version! * Part 1 - Setup the core software toolchain for MIOS application development on Windows - These are the minimal Windows applications you need, to write a MIOS Application in C for your MIDIbox. *

stryd_one_preparation

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Jun 2016 22:58:12 +0000

TODO : Finish to split that page in other sections Software Development Please see the toolchain setup docs for info on the software I use: application_development Hardware This part has moved to other sections Lab Supplies A few handy things to have around the lab for experimenting

stuartm

anonymous@undisclosed.example.com (Anonymous) — Tue, 09 Mar 2010 14:45:52 +0000

Hello there! I'm into MIDIbox since 2007, with now a MBSeqV3 and a MB64 completed. MIDIbox 64 "StuKontrol" I'm writing a report about the building of my MB64, now called “StuKontrol” Building the StuKontrol MIDIbox Sequencer V3 I made some videos of using the sequencer: (to be added)

tm5-codeblock

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Dec 2022 21:03:26 +0000

TM5 Codeblock this is one essential part for my triggermatrix5 it handles the Menue and the Buttons... Shematic Building and BOM 100 THT, and handsolder This PCB is needet 1x for triggermatrix5 BOM qty reference value mouser 3 ENC PEC11R-4015F-S0024 652-PEC11R-4015F-S24

tm5-gateinput

anonymous@undisclosed.example.com (Anonymous) — Thu, 12 Jan 2023 01:01:40 +0000

TM5 Gate/Trigger Input this is one essential part for my triggermatrix5 * Levelshift from 5V to the for the MCU required 3V, with a Resistor Divider * Overvoltage Protectect with TVS-Diodes * Preamp-Section 5V, 3V or Pre-Amped input - can be set vie Jumpers and Potentiometers, the PCB itself should be mounted on the Groundplate off the housing, the housing should have a service-plate to access this Settings!:

troubleshooting_lcd_displays

anonymous@undisclosed.example.com (Anonymous) — Sun, 20 Jul 2008 12:43:07 +0000

Display Troubleshooting Common problems, if it isn't your soldering...... Wiring Errors Remember: There is no common standard for the display connector - You should get your LCDs datasheet to see the correct pinout. You can run a small application written to check to see if any of the data pins on the LCD are shorted out. You can read about it from the forum topic here:

wilba_mb_6582_panels

anonymous@undisclosed.example.com (Anonymous) — Fri, 23 May 2014 15:08:31 +0000

My original MB-6582 and the newer ones have panels made by Front Panel Express (aka. Schaeffer in Germany), with a big endorsement from me. Their quality and service is excellent, and their only limitation is that artwork must be engraved and not silkscreen.

wilba_mb_6582_pcbthread

anonymous@undisclosed.example.com (Anonymous) — Tue, 18 Sep 2018 17:35:01 +0000

PCBs and base PCB parts kits ARE AVAILABLE NOW at SmashTV's shop! Modular Addict now carries the PCBs (and knobs!) for the MB-6582 project. “The rest of this page is old and most of it no longer applies. I am waiting for the wiki fairy to come along and tidy it up

wilba_mb_seq_construction_guide

anonymous@undisclosed.example.com (Anonymous) — Sun, 01 Apr 2018 21:06:45 +0000

Wilba's MB-SEQ Construction Guide Please read the entire construction guide before buying parts or starting to solder anything. Here's a mind dump of the build process I followed to assemble the MB-SEQ PCB and panel. Using a panel made by FPE/Schaeffer

wilba_midibox_rc

anonymous@undisclosed.example.com (Anonymous) — Sat, 25 Jun 2016 23:56:47 +0000

---------- MIDIbox RC Introduction MIDIbox RC is the (draft) name of my MIDIbox Ribbon Controller project. Inspired by the Ztar by Starr Labs, and ribbon controllers (which have been around for ages). The plan is to have four ribbon controllers for the four virtual strings, which will let you play sliding notes easily, like a fretless bass or slide guitar.

windows_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 01 Jul 2015 10:24:55 +0000

Core Toolchain Setup for MIOS32 application development on Windows The QuickStart Guide still needs to be done. The technical jargon: This is the Core Tools section in a walkthrough on the process of developing MIOS32 Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS32 Operating System. The IDE platform used will be

windows_toolchain_codeblocks

anonymous@undisclosed.example.com (Anonymous) — Wed, 30 Nov 2011 02:41:25 +0000

Toolchain Code::Blocks IDE Setup for MIOS application development on Windows The technical jargon: This is the Code::Blocks IDE section in a walkthrough on the process of developing MIOS Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS C Wrapper but also in ASM. The IDE platform used will be

wisefire

anonymous@undisclosed.example.com (Anonymous) — Fri, 03 Oct 2008 20:53:07 +0000

OUT TO LUNCH will be back when SmashTV will deliver me my parts for SIDv2

mb-mtrx_bulk

anonymous@undisclosed.example.com (Anonymous) — Sat, 12 Nov 2011 17:44:58 +0000

MB-MTRX Bulk Order Overview MB-MTRX is a printed board for the 8×8 modulation matrix commonly used with the MB-SID projects. The main board itself is just the LEDs and buttons connected to SIL headers, which can connect to DIN/DOUT modules or daughterboards. The daughterboards are for converting the board to the

midibox_kb

anonymous@undisclosed.example.com (Anonymous) — Thu, 24 Mar 2016 10:17:46 +0000

MIDIbox KB Hardwareinfos: Key calibration (written by user FantomXR) As I work a lot with keybeds from Fatar and I was looking for an electronic that work with it I found MIDIbox to be the best solution for me. I had a bunch of different keybeds in my hands and I noticed, that some keys are more sensitive than others. So I asked TK to implement a calibration-mode to overcome this issue. With the calibration-mode it is possible to adjust the slowest-delay…

buildchanbrd

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 21:52:32 +0000

Building the channel board: This board has many options, and the parts count changes with most of them. You should read it over carefully before starting the build. You'll need to know how many input amps to build, and how you'll want them configured. You'll also need to know which input channels will be routed to which output channels.

configmixer

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 22:16:33 +0000

ConfigMixer, The configuration tool. As I experimented with the mixer, I have had the luxury of being able to create MIDI controls as needed. As I work on an unusual computer, my tools won't be of much use to anybody else. I wanted to create a “universal” tool for configuring the mixer. I wrote “

inputchoices

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 16:01:44 +0000

Input processing: The choice of input circuits for your mixer channels is a big one, and each of us will have different needs. There are specific requirements for signals going into the PGA4311. Input signals will be unbalanced, and should not exceed +- 2.5 volts at any time. If the voltage swings above 2.5 volts, or below -2.5 volts, the sound quality will be affected (clipping). If the input voltage goes above +5 or below -5 volts, the PGA chip may be damaged. Also, the impedance of the input…

preconfigsoftware

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 13:05:13 +0000

Software configuration Some software options must be made before compiling, others should be made after the application is loaded and running. These are the pre-compile options: The MIDIBox mixer supports named channels. You will find that reading “Yamaha MU90-R” is a lot more descriptive than “Channel Four”. These names are set in file “USER_LCD.inc”, beginning near line 101. You should find a group of sixteen lines that look something like this:

softwareoverview

anonymous@undisclosed.example.com (Anonymous) — Sun, 07 Sep 2008 13:03:00 +0000

Language and development environment: MIOS and it's applications run on the PIC series of processors. Applications may be written in C or assembly. The MBMixer is written in assembly, as that is the language I am most comfortable with. During development of the MBMixer, a new development environment was announced for MIOS, that uses GCC and SDCC instead of the MPLAB package supplied by Microchip. I may move the code over to the new environment at some time, but for this release, I am still work…

midibox

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 05:07:59 +0000

About MIDIbox What is a MIDIbox A MIDIbox is an open-source, non-commercial, DIY, hardware MIDI device. It can perform various functions depending on the firmware that is installed and the hardware that is used. The MIDIbox DIY-projects consist of hardware (MBHP) and software (MIOS Operating System + Application). Some projects have special designed modules, others only require a Core module. Every device needs at least one Core.

references

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:23:28 +0000

References Some of the info on this wiki is a summary of info from other sources. If you'd like to know more, these links my be of interest. Please add any info you think may be useful! Learning Book Reviews Various PIC and C programming books Forum Highlights <- check this out!

picasm

anonymous@undisclosed.example.com (Anonymous) — Wed, 21 Jan 2009 02:20:27 +0000

PIC ASM Here you can find tips, tricks, tutorials and documentation concerning the Microchip PIC assembler language. Tips & Tricks, Questions and Answers How to locate two lables at the same memory position? If you want to export a label for C applications, and you want to use the same name for the variable in C and ASM, you can do this in the way shown here (for example in module_xxx.asm):

autotools-skeleton

anonymous@undisclosed.example.com (Anonymous) — Wed, 27 Jul 2011 15:44:11 +0000

FIXME Elaborate and test on all development platforms! Unofficial Method This document is an experiment, not an instruction Newbies, this is not the page you're searching for. Using the AutoTools application skeleton This page describes the use of the autotools-based mios application skeleton.

blm16x16_build_guide

anonymous@undisclosed.example.com (Anonymous) — Fri, 24 Nov 2017 19:52:01 +0000

IN PROGRESS MIDIbox BLM 16x16+X PCB and case build guide Introduction In 2010, MIDIboxer TK. made huge waves with his BLM (button LED matrix) 16×16+X. Never before had we seen such a mangle of duo LEDs, verowire and shift registers. The monome had been known for several years prior, as had smaller matrices for the SEQ, but the

troubleshooting_lcd_displays

anonymous@undisclosed.example.com (Anonymous) — Wed, 08 Apr 2009 04:47:30 +0000

hardware

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 14:47:26 +0000

Hardware Troubleshooting LCD Troubleshooting Please see the page lcd_Troubleshooting MIDI Troubleshooting Please see the page midi_troubleshooting After power-on, my MIDIbox sends a lot of random MIDI events, how can I avoid this? Basically there are two reasons which can cause random MIDI events:

start

anonymous@undisclosed.example.com (Anonymous) — Thu, 27 Jun 2024 04:59:30 +0000

MIDIbox SEQ V4 Beginner's Guide The Beginner's Guide is intended to cover the basic operation and concepts of the MBSEQv4 step sequencer. It does not include instructions on how to make the most out of all the features of the sequencer, or what each of the options on every menu page does, but it does give a good overview for the new user.